Feit Electric Smart Doorbell Camera (Model: CAM/DOOR/WIFI/G2)

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your Feit Electric Smart Doorbell Camera (Model: CAM/DOOR/WIFI/G2). This wired 2K HD video doorbell offers advanced features including night vision, motion detection, two-way audio, and compatibility with Alexa and Google Assistant. It includes a wireless chime for convenient indoor alerts.

2. What's Included

• Feit Electric Smart Doorbell Camera
• Wireless Chime
• Mounting Plate
• Angled Mounting Bracket (optional)
• Installation Screws and Anchors
• Wire Extenders

The Feit Electric Smart Doorbell Camera and its accompanying wireless chime, shown with the product packaging highlighting key features.

3. Safety Information

• Always turn off power at the circuit breaker before beginning any electrical installation.
• Ensure all wiring connections are secure to prevent electrical hazards.
• This device is designed for outdoor use.
• Consult a qualified electrician if you are unsure about any installation steps.

4. Setup and Installation

Follow these steps to install your Feit Electric Smart Doorbell Camera. For a visual guide, refer to the installation video below.

4.1 Wired Installation

1. Turn Off Power: Locate your circuit breaker and turn off the power to your existing doorbell.
2. Mark Position: Hold the mounting plate (or angled mounting plate if desired) against the wall at your desired doorbell location. Use a marker to mark the positions for drilling.
3. Drill Holes: Drill two holes at the marked positions.
4. Insert Anchors: Insert the provided wall anchors into the drilled holes.
5. Attach Mounting Plate: Secure the mounting plate to the wall using the provided screws.
6. Connect Wires: Loosen the screws on the back of the doorbell camera. Wrap your existing doorbell wires around these screws. If your existing wires are too short, use the provided wire extenders. Crimp the wire extenders to secure the connections.
7. Secure Wires: Tighten the screws to secure the wires to the doorbell camera.
8. Restore Power: Return to your circuit breaker and restore power.
9. Insert SD Card: Remove the rubber gasket from the doorbell camera and insert a Micro SD card (sold separately) for local video storage. Replace the gasket.
10. Mount Doorbell: Push the doorbell camera firmly into the mounting plate until it clicks into place.
11. Final Secure: Secure the doorbell camera to the mounting plate with the small screw located at the bottom.

4.2 App Connection & Chime Pairing

1. Download App: Download the free Feit Electric app from your smartphone's app store.
2. Pair Camera: Follow the in-app instructions for quick EZ pairing with BLE to connect your doorbell camera to your 2.4GHz home Wi-Fi network.
3. Pair Chime: Plug the wireless chime into a power outlet. Hold the button on the chime marked with a check mark until you hear an audible tone. Then, press the button on your doorbell camera. The chime should ring, indicating successful pairing.
4. Select Chime Tone: Press the other button on the wireless chime (marked with three lines) to cycle through and select your preferred chime tone.

5. Operating Instructions

Your Feit Electric Smart Doorbell Camera offers a range of features for enhanced home security and convenience.

5.1 Key Features

• 2K HD Video Quality: Experience clear video footage for monitoring your front door.
• Infrared Night Vision: The camera provides clear visibility up to 32 feet in complete darkness.
• Human Motion Detection: Advanced motion detection focuses on human movement, reducing false alerts from pets or passing vehicles. You will receive instant alerts on your smart device when motion is detected.
• Two-Way Audio: Communicate directly with visitors at your door using the built-in microphone and speaker via the Feit Electric app.
• Local Storage: Record and store up to 256GB of 2K HD video and photos on a Micro SD card (sold separately) without monthly fees, even if Wi-Fi is unavailable.
• Smart Home Compatibility: Integrate with Amazon Alexa and Google Assistant for voice control and viewing camera feeds on compatible devices.

The Feit Electric app interface, showcasing various smart camera features and controls.

Illustration of two-way audio communication, allowing interaction with visitors through the app.

5.2 Using the Feit Electric App

The Feit Electric app provides full control over your doorbell camera:

• View live footage from your doorbell camera.
• Receive instant motion alerts and doorbell rings.
• Access recorded video and images stored on your Micro SD card.
• Adjust motion detection sensitivity and zones.
• Enable or disable human detection.
• Manage two-way audio settings.

6. Maintenance

To ensure optimal performance and longevity of your doorbell camera, follow these maintenance guidelines:

• Cleaning: Periodically wipe the camera lens and surrounding area with a soft, damp cloth to remove dust and dirt. Avoid abrasive cleaners.
• Firmware Updates: Check the Feit Electric app regularly for firmware updates to ensure your device has the latest features and security enhancements.
• Connection Check: Occasionally verify that all wiring connections are secure and free from corrosion.
• SD Card Management: If using a Micro SD card, periodically review and manage stored footage to prevent it from filling up, especially if continuous recording is enabled.

7. Troubleshooting

If you encounter issues with your Feit Electric Smart Doorbell Camera, refer to the following common solutions:

8. Specifications

An image detailing the dimensions of the doorbell camera and listing key features.

9. Warranty Information

For detailed warranty information regarding your Feit Electric Smart Doorbell Camera, please refer to the official Feit Electric website or contact customer support. Warranty terms and conditions may vary.

10. Support

For further assistance, technical support, or to view frequently asked questions, please visit the Feit Electric support page:

Feit Electric Support Center

Scan the QR code or visit the link for 24/7 customer support.