1. Introduction
The Jononser K007 Magnetic Suction Cup Phone Mount is designed to provide a secure and versatile mounting solution for your smartphone in various environments, primarily vehicles. Its innovative design features a strong suction cup with Nano-Gel grip and powerful N52 magnets, ensuring stability even on challenging terrains. The mount offers extensive adjustability for optimal viewing angles and is compatible with a wide range of smartphones, including MagSafe-enabled devices and others using the provided metal rings.
Image: The Jononser K007 Magnetic Suction Cup Phone Mount in its compact form.
2. What's in the Box
- 1 x Suction Magnetic Phone Holder
- 1 x Cleaning Kit
- 2 x Metal Rings (for non-MagSafe phones)
3. Setup Guide
3.1. Surface Preparation
- Choose a clean, smooth, and flat surface for installation (e.g., dashboard, windshield, center console screen).
- Use the included alcohol wipe from the cleaning kit to thoroughly clean the chosen installation area.
- Allow the surface to dry completely for at least 15 seconds before proceeding.
Image: Visual guide showing the four steps for installing the phone mount.
3.2. Mount Installation
- Place the suction cup base firmly onto the prepared surface.
- Rotate the locking mechanism on the base clockwise until it is tight and the vacuum seal is secured. This creates a strong suction.
- Tip: For maximum adhesion and stability, allow the mount to settle for 12-24 hours after installation before attaching your phone.
3.3. Phone Attachment
- For iPhone 12/13/14/15/16/17 Series (and MagSafe cases): Simply align your phone or MagSafe-compatible case with the magnetic ring on the mount. The powerful N52 magnets will securely hold your device.
- For Non-MagSafe Phones/Cases: Attach one of the provided metal rings to the back of your phone or phone case. Ensure it is centered for optimal magnetic connection. Once the metal ring is attached, you can then place your phone onto the magnetic mount.
Image: Illustration of iPhone 12-17 series phones directly attaching to the mount without a metal ring.
Image: Example of non-MagSafe phone cases utilizing the included metal ring for secure attachment.
4. Operating Instructions
4.1. Adjusting the Mount
The Jononser K007 features an innovative transformable dual-axis metal bar, allowing for extensive adjustability:
- 210° Adjustability: Adjust the phone's angle in portrait orientation.
- 360° Adjustability: Rotate the phone to any desired angle in landscape orientation.
- The mount can be folded for compact storage when not in use.
Image: Detailed view of the mount's foldable design and various rotation axes for flexible positioning.
4.2. Multi-Scene Use
Beyond car dashboards and windshields, the compact and foldable design allows for versatile use:
- Vehicle: Dashboard, windshield, center console screen.
- Indoors: Gym equipment, kitchen surfaces, office desks, mirrors, etc.
Image: The phone mount securely holding a smartphone on gym equipment.
5. Maintenance
- To maintain optimal suction, periodically clean the suction cup and the mounting surface with a damp cloth or the provided cleaning kit.
- Ensure the suction cup is free of dust and debris before each application.
- The mount is designed to withstand temperatures from -40°F to 300°F.
- The mount is waterproof.
Image: The waterproof design of the suction cup base.
6. Troubleshooting
- Mount not sticking: Ensure the surface is clean, smooth, and dry. Re-clean the surface and the suction cup. Make sure the locking mechanism is fully tightened clockwise. Allow 12-24 hours for maximum adhesion after initial installation.
- Phone not holding securely: For non-MagSafe phones/cases, ensure the metal ring is properly attached and centered on the back of your device or case. Verify that there are no obstructions between the phone/case and the magnetic surface of the mount.
- Adjustments are stiff: The dual-axis metal bar is designed for a firm hold. Apply gentle, consistent pressure when adjusting the angle.
7. Specifications
| Feature | Detail |
|---|---|
| Brand | Jononser |
| Model Name | K007 Magsafe Car Mount |
| Model Number | K007 |
| Color | Black |
| Mounting Type | Suction Cup Phone Holder |
| Compatible Devices | Smartphones |
| Compatible Phone Models | All MagSafe Case, iPhone 12-17 Series (and newer), other phones with included metal rings |
| Additional Features | Adjustable, Lightweight, One-Hand Operation, Rotatable, Shock Resistant |
| Weight Capacity Maximum | 80 Pounds |
| Water Resistance Level | Waterproof |
| Compatible with Vehicle Type | All Cars, Tesla |
| Item Dimensions | 2.52 x 2.52 x 1.5 inches |
| Item Weight | 100 Grams |
| Material | Acrylonitrile Butadiene Styrene, Aluminum |
| UPC | 762027346409 |
8. Safety Information
- Ensure the mount is securely installed and your phone is firmly attached before driving.
- Do not obstruct your view of the road or any vehicle controls with the phone mount.
- Avoid adjusting the mount or phone while driving to prevent distractions.
- Keep out of reach of children.
9. Warranty and Support
Warranty: This product comes with a 1-Year Manufacturer Warranty.
Customer Support: For any questions, troubleshooting, or warranty claims, please contact Jononser customer support. Refer to the product packaging or the official Jononser website for contact details.