Bennett Read IND2200 Induction Pressure Washer

1. Introduction

Thank you for choosing the Bennett Read IND2200 Induction Pressure Washer. This manual provides essential information for the safe operation, assembly, maintenance, and troubleshooting of your new pressure washer. Please read this manual thoroughly before initial use and retain it for future reference. Proper use and maintenance will ensure optimal performance and extend the lifespan of your unit.

Important Safety Information:

• Always wear appropriate personal protective equipment (PPE), including eye protection, during operation.
• Ensure all connections are secure before starting the unit.
• Do not direct the water jet at people, animals, electrical devices, or the unit itself.
• Keep children and pets away from the operating area.
• Disconnect the power supply before performing any maintenance or cleaning.

2. Product Overview and Components

The Bennett Read IND2200 is designed for powerful and efficient outdoor cleaning. Familiarize yourself with the main components of your pressure washer.

Figure 2.1: Front view of the Bennett Read IND2200 Induction Pressure Washer, showcasing its compact design, integrated hose reel, and main power switch.

Figure 2.2: Rear view of the pressure washer, highlighting the water inlet, high-pressure outlet, detergent tank, and nozzle storage area.

Key Features:

• Induction Motor: Provides extended lifespan and reliable performance.
• Tri-Axial Pump: Engineered for increased performance and durability.
• Integrated Hose Reel: For convenient storage of the high-pressure hose.
• Detergent Tank: Allows for easy application of cleaning solutions.
• Versatile Nozzles: Includes 4 different nozzles for various cleaning tasks.

Figure 2.3: Visual representation of the Induction Motor for extended lifespan and Tri-Axial Pump for increased performance.

3. Setup and Assembly

Follow these steps to correctly set up your pressure washer before first use.

1. Unpacking: Carefully remove all components from the packaging. Check for any damage or missing parts.
2. Handle Assembly: Attach the handle to the main unit. Ensure it clicks securely into place or is fastened with the provided screws.
3. Wheel Attachment: If not pre-assembled, attach the wheels to the base of the unit for easy mobility.
4. High-Pressure Hose Connection: Connect one end of the high-pressure hose to the pressure washer's outlet and the other end to the spray gun. Ensure connections are hand-tightened securely.
5. Water Supply Connection: Connect a standard garden hose (not supplied) to the water inlet of the pressure washer. Ensure the water supply is clean and free of debris. Turn on the water supply fully.
6. Power Connection: Plug the power cord into a grounded electrical outlet. Ensure the outlet matches the voltage requirements of the pressure washer.

Figure 3.1: The integrated handle allows for easy transport and maneuverability of the unit.

4. Operating Instructions

Before operating, ensure all setup steps have been completed and you have read the safety guidelines.

4.1 Starting the Pressure Washer

1. Ensure the water supply is fully open.
2. Squeeze the trigger on the spray gun to purge air from the system until a steady stream of water emerges.
3. Turn the power switch to the 'ON' position. The motor will start.
4. Release the trigger to allow the motor to build pressure.

4.2 Using Nozzles

The IND2200 comes with four versatile nozzles, each designed for specific cleaning tasks. Always select the appropriate nozzle for the job to prevent damage to surfaces.

Figure 4.1: The four color-coded nozzles (Red 0°, Yellow 15°, Green 25°, White 40°) for various cleaning applications.

• Red (0°): Pin-point jet for stubborn stains and hard-to-reach areas. Use with extreme caution as it can damage surfaces.
• Yellow (15°): Narrow fan spray for intensive cleaning of smaller areas.
• Green (25°): Medium fan spray for general cleaning of most surfaces.
• White (40°): Wide fan spray for gentle cleaning, rinsing, and detergent application.

To change nozzles, ensure the pressure washer is off and the trigger is released. Pull back the collar on the spray gun wand, insert the desired nozzle, and push the collar forward until it locks.

4.3 Applying Detergent

The integrated detergent tank allows for easy application of cleaning solutions.

1. Fill the detergent tank with a pressure washer safe cleaning solution.
2. Attach the white (40°) nozzle to the spray gun. This nozzle is typically used for detergent application.
3. Start the pressure washer and squeeze the trigger. The unit will automatically draw detergent and mix it with the water.
4. Apply detergent evenly to the surface. Allow it to soak for the recommended time as per the detergent manufacturer's instructions.
5. Rinse the surface thoroughly with a higher pressure nozzle (e.g., 25° or 15°) after detergent application.

Figure 4.2: The pressure washer applying foam to a vehicle, demonstrating its detergent application capability.

4.4 Shutting Down

1. Turn the power switch to the 'OFF' position.
2. Turn off the water supply.
3. Squeeze the spray gun trigger to release any remaining pressure in the system.
4. Disconnect the garden hose and power cord.

5. Maintenance

Regular maintenance ensures the longevity and efficient operation of your pressure washer.

5.1 After Each Use

• Rinse Detergent Tank: If detergent was used, rinse the detergent tank thoroughly with clean water to prevent residue buildup.
• Clean Nozzles: Remove any debris from the nozzle openings using the provided nozzle cleaning tool or a thin wire.
• Drain Water: Disconnect the water supply and high-pressure hose. Squeeze the trigger to drain any remaining water from the pump and hoses.
• Wipe Down: Clean the exterior of the unit with a damp cloth.

5.2 Storage

• Store the pressure washer in a dry, frost-free environment.
• Coil the high-pressure hose and power cord neatly on the integrated reels.
• Store the spray gun and nozzles in their designated holders on the unit.

5.3 Winterization (for cold climates)

If storing the unit in an area where temperatures may drop below freezing, it is crucial to winterize the pressure washer to prevent damage.

1. Drain all water from the pump, hoses, and spray gun as described above.
2. Pour an anti-freeze solution (specifically designed for pressure washers) into the water inlet.
3. Briefly turn on the unit (for a few seconds) until the anti-freeze solution exits the high-pressure outlet.
4. Turn off the unit and store it in a frost-free location.

6. Troubleshooting

This section addresses common issues you might encounter with your pressure washer.

7. Specifications

Technical details for the Bennett Read IND2200 Induction Pressure Washer.

• Model Number: HPW404
• Power Source Type: Corded Electric
• Power: 2200W (as indicated in product images)
• Maximum Pressure: 160 BAR (as indicated in product images)
• High-Pressure Hose Length: 8 meters (as indicated in product images)
• Product Dimensions: 35L x 25W x 25H centimetres
• Package Dimensions: 40 x 30 x 30 cm
• Weight: 8 kg (as per package dimensions)
• ASIN: B0DSPSF76Z

8. Warranty and Support

For warranty information, technical support, or to inquire about spare parts, please contact Bennett Read customer service. Refer to your purchase documentation for specific warranty terms and contact details.

Note: Spare part availability information is not provided in the product specifications. Please contact customer support for assistance.