GIOTOHUN Cat Water Fountain (Model H1-BPRO) Instruction Manual

Introduction

Thank you for choosing the GIOTOHUN Cat Water Fountain. This manual provides detailed instructions for the proper setup, operation, and maintenance of your new pet water dispenser. Please read this manual thoroughly before use to ensure optimal performance and the longevity of the product.

Product Overview

The GIOTOHUN Cat Water Fountain is designed to provide fresh, circulating water for your pets, encouraging increased hydration. It features a 2-liter capacity, a triple filtration system, quiet operation, and an integrated LED light.

Key Features:

• 2L (67oz) Capacity: Provides sufficient water for 4-6 days for an average adult cat, reducing refill frequency.
• Triple Filtration System: Utilizes activated carbon, high-density cotton, and a sponge filter to remove impurities, odors, and soften water.
• Ultra-Quiet Pump: Operates at approximately ≤35dB, ensuring a peaceful environment for both pets and owners.
• Dual Water Flow Modes: Offers both tap mode and fountain mode to cater to different pet preferences and encourage drinking.
• Built-in LED Light: Allows for easy monitoring of water levels and helps pets locate the fountain in low-light conditions.
• Detachable Design: Facilitates easy assembly, disassembly, and cleaning of all components.

Image: The GIOTOHUN Cat Water Fountain with included filters and sponges.

Image: A cat drinking from the faucet mode, demonstrating the running water feature.

Image: Diagram illustrating the triple filtration system with filter cotton, activated carbon, and sponge filters.

Package Contents

Please verify that all items are present in the package:

• 1 x GIOTOHUN Cat Water Fountain Unit
• 6 x Activated Carbon Filters
• 3 x Sponge Filters
• 1 x Water Pump (pre-installed or separate)
• 1 x Instruction Manual

Setup Instructions

Follow these steps to assemble and prepare your GIOTOHUN Cat Water Fountain for first use:

1. Disassemble: Carefully remove all components from the packaging. Separate the top tray, water tank, pump, and filters.
2. Prepare Filters: Immerse the activated carbon filters in water for 3-5 minutes before first use to remove any loose carbon dust. Rinse the sponge filters under running water.
3. Install Pump: Place the water pump securely at the bottom of the water tank. Ensure the power cord is routed through the designated channel to prevent pinching.
4. Place Filters: Insert the sponge filter into its designated slot, typically around the pump. Place the activated carbon filter into the filter tray.
5. Assemble Top Tray: Place the top tray onto the water tank, ensuring it is seated correctly. If applicable, attach the faucet spout to the pump outlet.
6. Fill Water Tank: Fill the water tank with clean water up to the 'MAX' line indicated on the tank. Do not overfill.
7. Connect Power: Plug the power adapter into a wall outlet. The fountain will begin operating, and the LED light will illuminate.

Image: Exploded view showing the detachable components of the fountain for easy assembly and cleaning.

Operating Instructions

Once assembled and filled, the fountain operates continuously when plugged in.

• Water Level Monitoring: The transparent water tank and built-in LED light allow you to easily monitor the water level. Refill water when it approaches the 'MIN' line to prevent the pump from running dry.
• Water Flow Modes: The fountain typically provides a continuous flow. Some models may allow adjustment between faucet and bubbling fountain modes by adjusting the spout or pump settings. Refer to specific product diagrams if applicable.
• LED Indicator: The LED light indicates that the fountain is powered on and operating.

Image: The water fountain displaying its 2-liter capacity with clear MAX and MIN water level indicators.

Maintenance

Regular cleaning and filter replacement are crucial for maintaining water quality and extending the life of your fountain.

Filter Replacement:

• Replace the activated carbon filter every 2-4 weeks, or more frequently if you have multiple pets or notice reduced water flow.
• Rinse the sponge filter weekly and replace it every 2-4 weeks, or when it appears heavily soiled.

Pump Cleaning:

To extend the life of the pump and ensure efficient operation, clean the pump every 2-4 weeks.

1. Unplug the fountain from the power outlet.
2. Disassemble the fountain and remove the pump from the water tank.
3. Remove the pump cover and the impeller cap.
4. Remove the impeller.
5. Clean all components (pump housing, impeller, impeller cap, and cover) with a small brush and clean water to remove any hair, debris, or mineral buildup.
6. Reassemble the pump and place it back into the fountain.

Image: Illustration of the multi-layer filtration system, including carbon, cotton, and sponge components.

Image: Step-by-step guide for cleaning the water pump, including removing the cover, impeller cap, and impeller.

Troubleshooting

If you encounter issues with your fountain, refer to the following common problems and solutions:

Specifications

Warranty and Support

The GIOTOHUN Cat Water Fountain (Model H1-BPRO) comes with a 2-Year Warranty from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use.

For warranty claims, technical support, or inquiries regarding replacement parts, please contact the seller or GIOTOHUN customer service through the platform where the product was purchased. Please retain your proof of purchase for warranty validation.