1. Introduction
This manual provides instructions for the GLOWRIUM LED Aquarium Light, Model GC035001. This full spectrum light is designed for freshwater planted tanks, featuring a remote control with an LCD display, an auto-timer function, and IP67 waterproofing. It includes dimmable RGB+W+Moon LEDs for customizable lighting environments.
2. Package Contents
Verify that all items listed below are included in your package:
- GLOWRIUM LED Aquarium Light
- Remote Control
- Adapter
- Power Cable
- Stand (Extendable Brackets)
- User Manual (this document)
3. Safety Information
- Always unplug the light from the power outlet before performing any maintenance, cleaning, or installation.
- Ensure your hands are dry when handling the power adapter and plug.
- The light fixture is IP67 waterproof, meaning it is protected against temporary immersion in water. However, the power adapter and remote control are not waterproof and must be kept dry.
- Do not operate the light if any part is damaged, especially the power cord or adapter.
- Keep out of reach of children.
- Ensure proper ventilation around the light to prevent overheating.
- The remote control requires 2 AAA batteries (not included).
4. Setup
- Attach Brackets: Slide the extendable brackets onto the ends of the light fixture. Adjust the brackets to fit your aquarium's width. The brackets are designed to securely rest on the edges of your tank.
- Position Light: Place the light fixture with attached brackets securely on top of your aquarium. Ensure the light is centered and stable.
- Connect Power: Connect the power cable to the light fixture, then connect the adapter to the power cable. Plug the adapter into a suitable power outlet.
Figure 4.1: Adjustable brackets and size compatibility chart. The light is designed to fit tanks from 12-17 inches (for the 9W model) up to 48-53 inches (for the 36W model) using its extendable brackets.
5. Operating Instructions
5.1 Remote Control Overview
The GLOWRIUM LED Aquarium Light is operated using the included remote control with an LCD display. Ensure 2 AAA batteries are installed in the remote control. For optimal performance, direct the remote control towards the infrared receiver on the light fixture.
Figure 5.1: Remote control with LCD display. The display shows current time, sunrise/sunset settings, and individual RGBW channel percentages.
5.2 Power On/Off
Press the ON/OFF button on the remote control to turn the light on or off.
5.3 Auto-Timer Setting
The auto-timer allows for a 24/7 cycle with simulated sunrise and sunset. Once set, the light will operate automatically without further adjustments, even after a power interruption due to the built-in memory function.
- Press and hold the Timer button for three seconds to enter setup mode.
- Use the "+" and "-" buttons to adjust the time value.
- Use the "<" and ">" buttons to shift between parameters (current time, sunrise time, sunset time, and individual RGBW channel settings for each phase).
- The light simulates a 30-minute sunrise (ramp up) and a 30-minute sunset (ramp down) based on your set times.
Figure 5.2: Auto-timer simulating natural sunrise and sunset cycles.
5.4 Brightness Adjustment
The light offers 10 levels of brightness adjustment.
- Use the "+" and "-" buttons (outside of timer setup mode) to increase or decrease the overall brightness.
Figure 5.3: Visual representation of 10-level brightness adjustment.
5.5 Spectrum Control (RGBW)
The light features dimmable RGB+W+Moon LEDs, allowing for full spectrum customization.
- Individual Channel Adjustment: Press and hold the RGBW button for 3 seconds to adjust individual Red, Green, Blue, and White channels. Use the "+" and "-" buttons to change the intensity of the selected channel. Use "<" and ">" to switch between channels.
- Preset Spectrums: The remote offers three preset spectrums: Plant (C1), Fish (C2), and Moon (C3). Press the corresponding button to activate.
- Custom Spectrums: You can save your customized RGBW settings to C1, C2, or C3 by adjusting the individual channels and then holding down the desired preset button (C1, C2, or C3) until the setting is saved.
Figure 5.4: Specially designed blue spotlight for moonlight mode or enhancing blue hues.
Figure 5.5: Examples of Plant and Fish preset lighting modes.
5.6 Official Product Video
Video 5.1: This video demonstrates the full spectrum capabilities and remote control functions of the GLOWRIUM LED Aquarium Light, including the auto-timer and color adjustments.
6. Maintenance
- Cleaning: Regularly wipe the light fixture with a soft, damp cloth to remove dust, water spots, and algae buildup. Ensure the light is unplugged before cleaning. Do not use abrasive cleaners or solvents.
- Inspection: Periodically check the power cord and adapter for any signs of damage. If damage is found, discontinue use and contact customer support.
- Remote Control: Replace AAA batteries in the remote control when the display becomes dim or the remote's range decreases.
Figure 6.1: The IP67 waterproof design allows for safe cleaning of the light fixture.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power, loose connection, faulty adapter. | Check power outlet. Ensure all cables are securely connected. Try a different outlet. |
| Remote control not working. | Dead batteries, remote not aimed at receiver, interference. | Replace AAA batteries. Ensure remote is pointed directly at the light's infrared receiver. Remove any obstructions. |
| Timer function not working correctly. | Incorrect timer settings, power interruption (though memory function should prevent this). | Re-enter timer setup mode and verify all settings (current time, sunrise, sunset, RGBW values). Ensure the remote is functioning properly during setup. |
| Light flickers or dims unexpectedly. | Unstable power supply, loose connection, internal fault. | Check power connections. Try a different power outlet. If the issue persists, contact customer support. |
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | GC035001 |
| Power | 9 Watts |
| Voltage | 24 Volts |
| Light Output (Max) | 900 Lumens |
| Color Temperature | 7500 Kelvin |
| Color Rendering Index (CRI) | 94 |
| Light Source Type | Dimmable RGBW+Moon LEDs |
| Waterproof Rating | IP67 |
| Material | Aluminum |
| Dimensions (L x W x H) | 11.81"L x 2.56"W x 0.5"H |
| Item Weight | 0.51 Pounds |
| Remote Batteries | 2 AAA batteries required (not included) |
Figure 8.1: Detailed specifications for the GLOWRIUM LED Aquarium Light series.
9. Warranty and Support
GLOWRIUM provides a 2-year warranty for this product. We are committed to accepting returns and exchanges for any quality issues within the specified timeframe. For support or inquiries, please utilize our official after-sales channels. Our team is dedicated to honoring our commitment and assisting you with any product-related concerns.