1. Introduction
Thank you for choosing the BONTEC Single Monitor Stand. This adjustable gas spring arm monitor desk mount is designed to enhance your workspace ergonomics and free up valuable desk space. It is compatible with 15-32 inch screens and supports VESA 75x75mm and 100x100mm patterns. This manual provides detailed instructions for safe installation, operation, and maintenance of your monitor stand.
2. Safety Information
Please read all instructions carefully before assembly and use. If you do not understand these instructions or have doubts about the safety of the installation, please contact a qualified installer. Improper installation may cause damage or serious injury.
- Do not exceed the maximum weight capacity of 19.8 lbs (9 kg).
- Ensure the mounting surface (desk) is strong enough to support the combined weight of the stand and your monitor.
- Do not overtighten screws. Overtightening may cause damage to your equipment.
- Keep children and pets away during installation.
- Always use the provided tools and hardware.
- Periodically check all screws and connections to ensure they are secure.
3. Package Contents
Verify that all components are present and undamaged. If any parts are missing or damaged, please contact BONTEC customer service.
| Component | Description | Quantity |
|---|---|---|
| Monitor Arm Assembly | Main gas spring arm and VESA plate | 1 |
| C-Clamp Base | For desk edge mounting | 1 |
| Grommet Base | For through-desk hole mounting | 1 |
| Hardware Kit | Screws, washers, spacers, Allen keys | 1 set |
| Cable Management Clips | For organizing cables along the arm | Included |
4. Setup and Installation
The BONTEC Single Monitor Stand offers two installation methods: C-Clamp mounting and Grommet mounting. Choose the method that best suits your desk setup.
4.1 Desk Compatibility
- Desk Thickness: 0.39" to 3.15" (10mm to 80mm) for both C-Clamp and Grommet mounting.
- Grommet Hole Diameter: 0.4" to 2.4" (10mm to 60mm) for Grommet mounting.
4.2 VESA Compatibility
This monitor stand supports VESA mounting patterns of 75x75mm and 100x100mm. Ensure your monitor has one of these patterns before proceeding.
Image: The BONTEC Single Monitor Stand showcasing both C-Clamp and Grommet mounting options.
Image: Detailed illustration of the C-Clamp and Grommet mounting options, including supported desk thicknesses.
4.3 Installation Steps (General Overview)
- Assemble the chosen desk mounting base (C-Clamp or Grommet) to the main pole.
- Secure the pole to your desk according to the chosen mounting method.
- Attach the VESA plate to the back of your monitor using the appropriate screws.
- Slide the monitor with the attached VESA plate onto the monitor arm.
- Adjust the gas spring tension to match your monitor's weight (refer to Operating Instructions).
- Utilize the snap-in cable management system to route and hide cables for a clean workspace.
Image: The monitor arm demonstrating its innovative snap-in cable management system, keeping cables organized and out of sight.
4.4 Installation Video Guide
Video: Official BONTEC Single Monitor Stand installation and feature overview. This video demonstrates the assembly process and highlights key features of the monitor arm.
5. Operating Instructions and Adjustments
The BONTEC monitor stand offers full motion adjustability to achieve optimal viewing angles and ergonomic positioning.
5.1 Range of Motion
- Tilt: ±90° (up/down)
- Swivel: ±90° (left/right)
- Rotation: 360° (portrait to landscape)
- Max Extension: 21.3 inches
- Max Height: 17.7 inches
Image: Visual representation of the monitor arm's flexible viewing experience, detailing tilt, swivel, and 360-degree rotation capabilities.
Image: Illustration highlighting the built-in gas spring support, ensuring smooth and stable adjustments.
5.2 Gas Spring Tension Adjustment
The gas spring tension needs to be adjusted to match the weight of your monitor for optimal movement and stability. Use the provided Allen key.
- If the monitor droops or falls, turn the tension screw counter-clockwise to increase tension.
- If the monitor rises too easily or is difficult to push down, turn the tension screw clockwise to reduce tension.
- Adjust gradually, testing the arm's movement after each turn. Do not exceed 8 turns in either direction from the initial setting.
5.3 Tilt and Swivel Adjustment
If the monitor tilt or swivel is too loose or too stiff, use the appropriate Allen key to adjust the screws on the U-shaped joint head. Turn clockwise to tighten, counter-clockwise to loosen.
5.4 Adjustment Video Guide
Video: Important tips for adjusting the tilt, swivel, and gas spring tension of the monitor arm to ensure smooth and stable operation.
6. Maintenance
Regular maintenance ensures the longevity and optimal performance of your monitor stand.
- Cleaning: Wipe the stand with a soft, damp cloth. Avoid abrasive cleaners or solvents that may damage the finish.
- Inspection: Periodically check all screws and connections to ensure they are tight and secure. Re-tighten if necessary.
- Gas Spring: The gas spring is designed for long-term use (30,000 cycles tested) and generally requires no maintenance. However, if you notice significant changes in its performance, refer to the tension adjustment section.
7. Troubleshooting
If you encounter issues with your monitor stand, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Monitor droops or falls | Gas spring tension is too low for monitor weight. | Increase gas spring tension by turning the screw counter-clockwise (Max 8 turns). Refer to Section 5.2. |
| Monitor rises too easily or is hard to push down | Gas spring tension is too high for monitor weight. | Decrease gas spring tension by turning the screw clockwise (Max 8 turns). Refer to Section 5.2. |
| Monitor tilt/swivel is loose | Tilt/swivel joint screw is loose. | Tighten the tilt/swivel joint screw clockwise using the appropriate Allen key. Refer to Section 5.3. |
| Monitor arm feels unstable | Desk clamp/grommet base is not securely tightened. | Ensure the C-Clamp or Grommet base is securely fastened to the desk. Check all connection points. |
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | GDM7501-v02-FBA |
| Compatible Screen Size | 15 - 32 inches |
| Weight Capacity | Up to 19.8 lbs (9 kg) |
| VESA Compatibility | 75x75mm, 100x100mm |
| Mounting Options | C-Clamp, Grommet Base |
| Desk Thickness (C-Clamp/Grommet) | 0.39" - 3.15" (10mm - 80mm) |
| Grommet Hole Diameter | 0.4" - 2.4" (10mm - 60mm) |
| Tilt Range | ±90° |
| Swivel Range | ±90° |
| Rotation | 360° |
| Max Extension | 21.3 inches |
| Max Height | 17.7 inches |
| Material | Aluminum, Metal (Zinc) |
| Color | Black |
9. Warranty & Support
BONTEC products are manufactured with high-quality materials and undergo rigorous testing to ensure durability and performance. For warranty information, technical support, or any questions regarding your product, please contact BONTEC customer service through the retailer where you purchased the product or visit the official BONTEC website.
Contact Information: Please refer to your purchase documentation or the BONTEC official website for the most up-to-date contact details.
