Introduction
Thank you for choosing the Outsunny 30" Tall Outdoor Waterfall Fountain. This 4-tier cascading water feature, crafted from durable resin and equipped with LED lights and an adjustable pump, is designed to enhance your outdoor space with soothing sounds and a captivating visual display. Please read this manual thoroughly before setup and operation to ensure safe and optimal performance.
The Outsunny 30-inch tall outdoor waterfall fountain features four cascading resin bowls with integrated LED lighting, designed for outdoor decor.
Safety Information
- Always disconnect the power supply before performing any maintenance or cleaning.
- Ensure the fountain is placed on a stable, level surface to prevent tipping.
- Keep the power cord away from high-traffic areas and sharp objects.
- Do not operate the pump without sufficient water, as this can cause damage.
- Ensure the electrical outlet is a grounded outdoor-rated receptacle and protected by a Ground Fault Circuit Interrupter (GFCI).
- Do not allow children or pets to play with the fountain unsupervised.
- During freezing temperatures, drain the water and store the fountain indoors to prevent damage.
Package Contents
- 1 x Outsunny 4-Tier Waterfall Fountain Unit
- 1 x Low-Voltage Water Pump with Adjustable Flow
- Integrated LED Lights
- Instruction Manual
Setup
Follow these steps to set up your Outsunny waterfall fountain:
- Unpacking and Placement: Carefully remove all components from the packaging. Choose a level, stable location for your fountain, ensuring it is near a suitable outdoor electrical outlet.
- Pump Installation: Place the low-voltage pump inside the designated reservoir area, typically at the bottom of the fountain unit. Ensure the pump's tubing is securely connected to the water outlet within the fountain structure.
- Filling with Water: Fill the fountain with distilled water until the pump is fully submerged. Avoid overfilling.
- Power Connection: Plug the fountain's power cord into a grounded outdoor-rated electrical outlet with GFCI protection. The water flow should begin almost immediately.
The fountain includes a low-voltage pump with an adjustable flow setting, allowing users to customize the water's intensity.
Constructed from lightweight and weather-resistant resin, this fountain is designed for longevity and durability against various outdoor elements.
This video demonstrates the Outsunny 4-tier waterfall fountain in an outdoor setting, showcasing its cascading water flow and integrated LED lights during both day and night. It provides a visual representation of the product's aesthetic and functionality.
Operating Instructions
Water Flow Adjustment
The included pump features an adjustable knob to control the water flow rate. Turn the knob to increase or decrease the flow, allowing you to customize the sound and visual effect of the cascading water to your preference.
LED Lights
The fountain is equipped with integrated warm white LED lights that illuminate the cascading water. These lights operate automatically when the fountain is powered on, providing a gentle glow and enhancing the ambiance during the evening hours.
Integrated warm white LED lights enhance the visual appeal of the cascading water, creating a serene ambiance, especially during the evening.
Maintenance
- Regular Water Refill: Check the water level daily, especially during warm weather, and refill as needed to ensure the pump remains fully submerged. Evaporation and splashing will naturally reduce the water level.
- Cleaning: Periodically clean the fountain and pump to prevent mineral buildup, algae, or debris accumulation. Disconnect power, drain the water, and use a soft brush with a mild cleaning solution. Rinse thoroughly before refilling.
- Winterization: Before the first frost, disconnect the power, drain all water from the fountain and pump, and thoroughly dry all components. Store the fountain indoors in a dry, protected area to prevent freezing damage.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No water flow or weak flow | Low water level, clogged pump, kinked tubing, pump not powered. | Ensure water level is adequate. Clean the pump and tubing. Check power connection and pump adjustment knob. |
| LED lights not working | Power issue, damaged LED. | Check power connection. Contact customer support if lights remain off. |
| Excessive splashing | Water flow too high, uneven surface. | Adjust the pump's flow rate to a lower setting. Ensure the fountain is on a perfectly level surface. |
Specifications
| Feature | Detail |
|---|---|
| Overall Dimensions | 13.8" L x 12.2" W x 30.7" H |
| Material | Resin |
| Color | Gray |
| Special Features | Lighted, Lightweight, Weather Resistant |
| Power Source | Corded Electric |
| Item Weight | 25 Pounds |
| Model Number | 84J-016V80GY |
This diagram illustrates the overall dimensions of the fountain: 13.8" L x 12.2" W x 30.7" H, with individual bowl heights indicated.
Warranty and Support
For warranty information or technical support, please refer to the product packaging or contact Outsunny customer service directly. Keep your purchase receipt for any warranty claims.
