Introduction and Overview
This manual provides instructions for the Anderic RRTX045-LR remote control, designed as a direct replacement for the Home Decorators Collection and Hampton Bay A25-TX045-LR ceiling fan remote. It covers installation, operation, and maintenance to ensure optimal performance.
Important Compatibility Note: This remote specifically replaces the A25-TX045-LR. Please verify your original remote's model number.
Setup and Installation
Battery Installation
The Anderic RRTX045-LR remote requires two (2) AAA batteries (not included).
- Open the battery compartment cover located on the back of the remote.
- Insert two AAA batteries, ensuring correct polarity (+/-) as indicated inside the compartment.
- Close the battery compartment cover securely.
Pairing Instructions
To pair the remote with your ceiling fan receiver:
- Ensure batteries are correctly installed in the remote.
- Turn off the power to your ceiling fan at the wall switch or circuit breaker.
- Wait approximately 10-15 seconds.
- Turn the power back on to the ceiling fan.
- Within 30 seconds of restoring power, press and release (or tap) the "Learn" button located inside the battery compartment of the remote.
- The fan light (if applicable) may blink or the fan may briefly turn on to indicate successful pairing.
- Test all functions of the remote to confirm successful pairing.
Operating Your Remote Control
The Anderic RRTX045-LR remote provides comprehensive control over your ceiling fan's functions.
Fan Speed Control
The remote features a five-speed control system. Use the numbered buttons (1-5) to adjust the fan speed. '0' typically turns the fan off.
Light Control
The light button (represented by a light bulb icon) controls the fan's light.
Press once to turn the light on/off.
To dim or brighten the light, press and hold the light button. Release when the desired brightness is achieved.
The color change button (represented by a multi-colored light bulb icon) allows you to cycle through available light color temperatures or modes, if supported by your fan.
Fan Direction Control
The fan direction button (represented by a circular arrow icon) allows you to switch between forward and reverse modes.
Forward mode (counter-clockwise) is typically used in warmer months to create a downdraft.
Reverse mode (clockwise) is typically used in cooler months to circulate warm air.
Product Specifications
| Feature | Detail |
|---|---|
| Model Number | RRTX045LR |
| Compatibility | Replaces Home Decorators Collection and Hampton Bay A25-TX045-LR |
| Power Source | 2 x AAA Batteries (not included) |
| Dimensions | 6 x 2 x 1 inches |
| Item Weight | 3.2 ounces |
| Color | White |
| Special Feature | Ergonomic |
Troubleshooting
Remote Not Responding
- Check battery installation and ensure batteries are fresh.
- Re-attempt the pairing process as described in the "Pairing Instructions" section.
- Ensure there are no obstructions between the remote and the fan receiver.
- Verify that the fan's power supply is on.
Fan Light Not Dimming/Changing Color
- Ensure your ceiling fan model supports dimming and color change functions. Not all fans have these capabilities.
- For dimming, press and hold the light button. A quick press will only toggle on/off.
- For color change, ensure you are pressing the correct multi-colored light bulb button.
Fan Not Changing Direction
- Ensure the fan is running at a low speed or off before attempting to change direction. Some fans require this for the direction change to register.
- Confirm your fan model supports reversible direction.
Care and Maintenance
Keep the remote control dry and clean. Avoid exposure to moisture or extreme temperatures.
Clean the remote with a soft, dry cloth. Do not use abrasive cleaners or solvents.
If the remote will not be used for an extended period, remove the batteries to prevent leakage.
Warranty and Support
For warranty information or technical support, please refer to the manufacturer's official website or contact Anderic customer service directly. Specific warranty details are not provided in this manual.
You can also scan the QR code on the back of your remote for additional help and resources:
