1. Introduction
Thank you for choosing the AIRPLUS 80 Pint Dehumidifier, Model 602EE. This appliance is designed to effectively remove excess moisture from your indoor environment, improving air quality and comfort. It features a robust dehumidification capacity of 80 pints per day, suitable for areas up to 5000 square feet, and includes multiple operational modes, a 24-hour timer, and continuous drainage options. Please read this manual thoroughly before operating the unit to ensure safe and optimal performance.
2. Safety Instructions
To prevent injury to the user or others and property damage, the following instructions must be followed. Incorrect operation due to ignoring instructions may cause harm or damage.
- Electrical Safety: Always use a grounded electrical outlet. Do not operate the unit with a damaged power cord or plug. Do not share the electrical outlet with other appliances.
- Placement: Place the dehumidifier on a firm, level surface. Ensure there is at least 8 inches (20 cm) of clearance around the unit for proper airflow. Do not block air inlets or outlets.
- Water Tank: Do not drink the water collected from the dehumidifier. Empty the water tank regularly or use the continuous drainage option.
- Operation: Do not insert fingers or foreign objects into the air inlets or outlets. Do not operate the unit near flammable gases or combustible materials.
- Maintenance: Always unplug the unit before cleaning or performing any maintenance. Do not attempt to repair or disassemble the unit yourself. Contact qualified service personnel.
- Children and Pets: Keep children and pets away from the dehumidifier during operation.
3. Product Overview and Components
Familiarize yourself with the main parts of your AIRPLUS dehumidifier.
Figure 3.1: Front view of the AIRPLUS 80 Pint Dehumidifier, showing the air intake grille and visible water tank level indicator.
Figure 3.2: Internal view highlighting features such as Automatic Memory, Outage Protection, Defrost function, and 24-hour Timer.
Control Panel
The control panel is located on the top of the unit and allows you to manage all functions. It includes a digital display for temperature, humidity, and timer settings, along with mode indicators.
- Power Button: Turns the unit on or off.
- Mode Button: Cycles through available operating modes (e.g., Auto, Continuous, Drying, Silent).
- Humidity Setting Buttons: Adjusts the desired humidity level.
- Timer Button: Sets the 24-hour on/off timer.
- Display: Shows current humidity, set humidity, or timer settings.
4. Setup
4.1 Unpacking
- Carefully remove the dehumidifier from its packaging.
- Remove all packing materials, including any tape or protective films.
- Inspect the unit for any shipping damage. If damaged, do not operate and contact customer support.
4.2 Placement
Proper placement is crucial for efficient operation.
- Place the unit on a stable, level surface to prevent vibration and water leakage.
- Ensure at least 8 inches (20 cm) of space around the unit for adequate air circulation. Do not place it against a wall or furniture that would obstruct airflow.
- Avoid placing the unit in direct sunlight or near heat sources.
- The unit is equipped with hidden casters for easy mobility.
Figure 4.1: Design features including a portable handle, hidden casters for mobility, and a visual water tank.
4.3 Power Connection
Plug the power cord into a grounded 120V/60Hz electrical outlet. Ensure the outlet is suitable for the unit's power requirements.
4.4 Drainage Options
Your dehumidifier offers two drainage methods: manual emptying of the water tank or continuous drainage via a hose.
- Water Tank (Manual Drainage): The unit has a 0.85-gallon (3.2-liter) water tank. When the tank is full, the dehumidifier will beep and automatically shut off. The indicator light will illuminate. Empty the tank and place it back correctly for the unit to resume operation.
- Continuous Drainage (Hose): For continuous operation without needing to empty the tank, attach the included drain hose (5.5 ft long) to the drainage hole at the bottom of the water tank. Ensure the hose is sloped downwards to allow gravity to drain the water into a suitable floor drain or container.
Figure 4.2: Rear view showing the continuous drain hose connection and the water tank removed for manual emptying. The unit features overflow protection.
5. Operating Instructions
5.1 Power On/Off
Press the Power button on the control panel to turn the unit on or off.
5.2 Setting Desired Humidity
When the unit is on, use the Humidity Setting buttons (usually '+' and '-' or up/down arrows) to adjust the desired humidity level. The display will show the set humidity. The unit will operate until the ambient humidity reaches the set level, then cycle on and off to maintain it.
5.3 Mode Selection
Press the Mode button to cycle through the available operating modes:
- Auto Mode: The unit automatically adjusts its operation based on the ambient humidity to maintain a comfortable level.
- Continuous Mode: The unit runs continuously, regardless of the humidity level, until manually turned off or the water tank is full (if continuous drainage is not used).
- Drying Mode: Designed for faster dehumidification, often used for drying clothes or in very damp conditions.
- Silent Mode: Operates at a lower fan speed for quieter performance, suitable for bedrooms or living areas.
5.4 Timer Function
Press the Timer button to set a 24-hour timer for automatic on or off operation. Use the humidity setting buttons to adjust the desired time in hours. The unit will turn on or off after the set duration.
5.5 Automatic Defrost
The dehumidifier is equipped with defrost sensors. If the coil temperature drops below 45°F (7°C), the unit will automatically enter defrost mode to prevent ice buildup, ensuring proper operation even in colder environments.
5.6 Negative Ion Function
This unit includes a negative ion function, which can be activated to help purify the air by releasing negative ions.
Figure 5.1: Illustration of the air ionizer function, designed to enhance air quality.
6. Maintenance
Regular maintenance ensures the longevity and efficiency of your dehumidifier.
6.1 Emptying the Water Tank
If not using continuous drainage, the water tank must be emptied when full. The unit will stop operating and alert you. Carefully pull out the water tank, discard the collected water, and slide the tank back into place until it clicks securely.
6.2 Cleaning the Air Filter
The dehumidifier is equipped with a washable filter. A clean filter helps maintain optimal performance and air quality.
- Unplug the dehumidifier from the power outlet.
- Locate and remove the air filter (typically on the back or side of the unit).
- Wash the filter with warm, soapy water. Rinse thoroughly.
- Allow the filter to air dry completely before reinstalling it. Do not use a dryer or direct heat.
- Reinsert the dry filter into the unit.
Figure 6.1: Illustration showing the washable filter and universal wheels for convenient mobility.
6.3 Cleaning the Unit Exterior
Wipe the exterior of the dehumidifier with a soft, damp cloth. Do not use harsh chemicals, abrasives, or solvents, as these can damage the surface.
6.4 Storage
If storing the unit for an extended period:
- Unplug the unit and empty the water tank.
- Clean the air filter and the exterior.
- Coil the power cord neatly.
- Store the unit upright in a cool, dry place, away from direct sunlight and extreme temperatures.
7. Troubleshooting
Before contacting customer support, please refer to the following troubleshooting guide for common issues.
| Problem | Possible Cause | Solution |
|---|---|---|
| Unit does not turn on | No power; Power cord loose; Water tank full or not properly seated; Temperature too low. | Check power connection; Ensure water tank is empty and correctly installed; Unit may be in defrost mode if ambient temperature is low. |
| No water collected | Humidity level too low; Air filter clogged; Room temperature too low; Unit in fan-only mode. | Adjust desired humidity setting lower; Clean the air filter; Dehumidifiers are less effective below 45°F (7°C); Select a dehumidification mode. |
| Unit runs continuously, but humidity does not decrease | Room size too large; Doors/windows open; Air filter clogged; Unit set to Continuous mode. | Ensure unit is appropriate for room size; Close all doors and windows; Clean air filter; Set desired humidity level in Auto mode. |
| Loud noise during operation | Unit not on a level surface; Air filter clogged; Internal component issue. | Place unit on a flat, stable surface; Clean air filter; If noise persists, contact customer support. |
| Frost on coils | Low room temperature. | This is normal. The unit will automatically defrost. Do not attempt to remove frost manually. |
8. Specifications
| Feature | Specification |
|---|---|
| Brand | AIRPLUS |
| Model Name | 602EE |
| Dehumidification Capacity | 80 Pints per Day |
| Coverage Area | Up to 5000 Square Feet |
| Water Tank Capacity | 0.85 Gallons (approx. 3.2 Liters) |
| Product Dimensions (D x W x H) | 12.99"D x 9.44"W x 21.25"H |
| Item Weight | 28.6 pounds |
| Number of Speeds | 4 |
| Operation Mode | Automatic |
| Special Features | Continuous Draining, Auto Shut-off, Humidity Control, 24H Timer, Silent Mode, Automatic Defrost, Negative Ion Function |
| Included Components | Drain Hose (5.5 ft) |
9. Warranty and Support
AIRPLUS products are manufactured to high-quality standards. For any after-sales problems, technical assistance, or warranty inquiries, please contact AIRPLUS customer support. Please have your model number (602EE) and purchase information ready when contacting support.
Contact information can typically be found on the product packaging, the official AIRPLUS website, or through your retailer's customer service portal.
