darkFlash DV360S All-in-one Liquid CPU Cooler User Manual

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your darkFlash DV360S All-in-one Liquid CPU Cooler. Please read this manual thoroughly before installation and use to ensure optimal performance and safety. Proper installation and care will extend the lifespan of your product and ensure efficient cooling for your system.

2. Safety Information

Observe the following safety guidelines to prevent damage to the product or injury to yourself:

• Ensure all power to the system is disconnected before installation or maintenance.
• Handle components with care to avoid damage to delicate parts.
• Do not open the pump or radiator as this may void the warranty and cause leaks.
• Keep the product away from liquids and extreme temperatures.
• Use only the provided mounting hardware to ensure proper fit and function.

3. Package Contents

Verify that all items are present in your package:

• darkFlash DV360S AIO Cooler (360mm Radiator with Integrated Pump and LCD Display)
• 3x 120mm PWM ARGB Fans
• Mounting Hardware for Intel Sockets (LGA1851/1700/1200/115X/2066/2011/2011-V3)
• Mounting Hardware for AMD Sockets (AM5/AM4/AM3+/AM3/AM2+/AM2/FM2+/FM2/FM1)
• Thermal Paste
• Fan and ARGB Cables
• USB Cable for LCD Display

4. Product Features

The darkFlash DV360S Liquid CPU Cooler offers advanced features for superior performance and customization:

• 3.2" IPS LCD Display: Features a 3.2-inch square IPS display with 320x320 resolution for vivid visuals and customizable information. The magnetic attachment allows for easy installation at 270° for a personalized user experience.
• Efficient and Silent Pump: Boasts a 3-phase 9-pole motor for ultimate cooling performance with a new fluid impeller and micro-tooth technology, ensuring higher efficiency and stability.
• Optimized PWM Fans: Includes three PWM ARGB fans with speeds up to 1800RPM±10% and noise levels ≤30dBA. The improved PWM design enhances airflow and air pressure, automatically adjusting fan speed based on system temperature for optimal cooling and quietness.
• Powerful Heat Dissipation: Features a high-density radiator and high polymer rubber hoses for low resistance and efficient cooling. Delivers exceptional performance with high efficiency and low noise.
• Strong Compatibility: Seamlessly connects with motherboards that support ARGB Sync from brands like ASUS, Gigabyte, and MSI, enhancing your gaming setup with vibrant color effects.

5. Setup Instructions

5.1 Pre-Installation Checklist

• Ensure your motherboard is compatible with the cooler's mounting brackets (Intel LGA1851/1700/1200/115X/2066/2011/2011-V3 or AMD AM5/AM4/AM3+/AM3/AM2+/AM2/FM2+/FM2/FM1).
• Confirm your PC case has adequate space for a 360mm radiator and three 120mm fans.
• Gather necessary tools: screwdriver, thermal paste applicator (if not pre-applied).

5.2 Installation Steps

1. Prepare Motherboard: Install the appropriate backplate and standoffs for your CPU socket type (Intel or AMD).
2. Apply Thermal Paste: Apply a thin, even layer of thermal paste to the CPU IHS (Integrated Heat Spreader).
3. Mount Pump/Cold Plate: Carefully place the pump/cold plate assembly onto the CPU, aligning it with the standoffs. Secure it with the provided thumb screws or nuts.
4. Install Radiator and Fans: Mount the three 120mm fans to the radiator. Then, install the radiator assembly into your PC case, typically at the top or front, ensuring proper airflow direction.
5. Connect Cables:
   • Connect the pump power cable to the CPU_FAN or AIO_PUMP header on your motherboard.
   • Connect the fan PWM cables to available fan headers on your motherboard or a fan hub.
   • Connect the ARGB cables from the fans and pump to a compatible 5V 3-pin ARGB header on your motherboard or an ARGB controller.
   • Connect the USB cable from the pump head to an available internal USB 2.0 header on your motherboard for LCD display functionality.
6. Cable Management: Route all cables neatly to ensure good airflow and a clean build.

6. Operating Instructions

6.1 LCD Display Customization

The 3.2-inch IPS LCD display on the pump head can be customized using the darkFlash software. After installing the software (available from the official darkFlash website), you can:

• Monitor real-time system information such as CPU temperature, clock speed, and GPU data.
• Upload custom images or GIFs to personalize your display.
• Adjust screen brightness and orientation (270° magnetic attachment allows physical rotation).

6.2 Fan and Pump Control

The PWM fans and pump automatically adjust their speed based on CPU temperature to maintain optimal cooling performance and minimize noise. You can fine-tune fan curves and pump speeds through your motherboard's BIOS/UEFI settings or compatible third-party software.

6.3 ARGB Sync

The ARGB lighting of the fans and pump head can be synchronized with compatible motherboards (ASUS Aura Sync, Gigabyte RGB Fusion, MSI Mystic Light Sync, ASRock Polychrome RGB). Connect the ARGB cables to the motherboard's 5V 3-pin ARGB header and use the motherboard's lighting control software to customize lighting effects.

7. Maintenance

Regular maintenance ensures the longevity and performance of your cooler:

• Dust Cleaning: Periodically clean dust from the radiator fins and fan blades using compressed air or a soft brush. Ensure fans are not spinning during cleaning.
• Check Connections: Occasionally check all cable connections (power, fan, ARGB, USB) to ensure they are secure.
• Inspect Hoses: Visually inspect the hoses for any signs of wear, kinks, or leaks.

8. Troubleshooting

If you encounter issues, refer to the following common troubleshooting steps:

• No Power/Fans Not Spinning: Check all power connections, especially the pump and fan headers on the motherboard. Ensure the power supply is functioning correctly.
• High CPU Temperatures: Verify that the pump is running and the cold plate is making proper contact with the CPU. Re-apply thermal paste if necessary. Ensure fans are spinning and airflow is unobstructed.
• LCD Display Not Working: Check the USB 2.0 header connection to the motherboard. Ensure the darkFlash software is installed and running. Try re-installing the software or updating drivers.
• ARGB Lighting Issues: Confirm ARGB cables are correctly connected to a 5V 3-pin header. Check motherboard ARGB software settings. Ensure the ARGB header is enabled in BIOS/UEFI.
• Unusual Noises: Check for any cables obstructing fan blades. Ensure the pump is securely mounted and not vibrating against other components.

9. Technical Specifications

10. Warranty and Support

The darkFlash DV360S All-in-one Liquid CPU Cooler comes with a 3-year assurance from the date of purchase. This warranty covers manufacturing defects and ensures professional user experience.

For technical support, warranty claims, or further assistance, please visit the official darkFlash website or contact their customer service department:

• Official darkFlash Website: www.darkflash.com
• Customer Service Contact: Refer to the official website for regional contact information.

Please retain your proof of purchase for warranty validation.