Introduction
This manual provides comprehensive instructions for the safe installation, operation, and maintenance of your Wheatronic 20-inch Gold Dimmable LED Flush Mount Ceiling Light Fixture, Model C24. Please read these instructions carefully before beginning installation and retain this manual for future reference.
Image: The Wheatronic 20-inch Gold Dimmable LED Flush Mount Ceiling Light Fixture, showcasing its modern design.
Safety Information
- Always turn off the power at the circuit breaker before installation, removal, or maintenance.
- Consult a qualified electrician if you are unsure about the installation process.
- Ensure all electrical connections are secure and comply with local codes and ordinances.
- Do not attempt to modify the fixture. Any modifications may void the warranty and create a safety hazard.
- This fixture is designed for indoor use only and is not water-resistant.
Package Contents
Verify that all components are present before beginning installation:
- LED Ceiling Light Fixture (Main Unit)
- Light Shade
- PC Cover
- Installation Instructions Manual (This document)
- Mounting Hardware (Screws, wire nuts, etc.)
Specifications
| Brand | Wheatronic |
| Model | C24 |
| Dimensions (L x W x H) | 20" x 20" x 2.95" |
| Weight | 2 Pounds |
| Material | Metal, Plastic |
| Color | Gold |
| Wattage | 36W |
| Brightness | 3600 Lumens |
| Color Temperature (CCT) | 5CCT (3000K, 3500K, 4000K, 5000K, 6000K) |
| Dimmability | 10%-100% (Compatible with most standard dimmer switches) |
| Voltage | 120V AC |
| Lifespan | Up to 50,000 hours |
| Certification | ETL |
Image: Overview of key product specifications including wattage, lumens, color temperature, and lifespan.
Installation Instructions
Before you begin: Ensure power is turned off at the circuit breaker. Read all instructions thoroughly.
- Prepare the Mounting Surface: Ensure the junction box is securely mounted and capable of supporting the fixture's weight.
- Attach Mounting Bracket: Secure the mounting bracket to the junction box using the provided screws.
- Electrical Connections:
- Connect the black wire from the fixture to the black (live) wire from the junction box.
- Connect the white wire from the fixture to the white (neutral) wire from the junction box.
- Connect the ground wire from the fixture to the ground wire from the junction box.
- Secure all connections with wire nuts and ensure no bare wires are exposed.
- Select Color Temperature (CCT): Before mounting the fixture flush to the ceiling, locate the CCT switch on the back of the fixture. Select your desired color temperature (3000K, 3500K, 4000K, 5000K, or 6000K). This setting cannot be changed easily after installation.
- Mount the Fixture: Carefully align the fixture with the mounting bracket and secure it using the provided screws. Ensure the fixture is flush against the ceiling.
- Restore Power: Once the fixture is securely installed, restore power at the circuit breaker.
Image: Example of a CCT selection switch, typically located on the back of the fixture.
Image: Dimensional diagram of the light fixture, showing its 20-inch diameter and 2.95-inch height.
Operating Instructions
Power On/Off
Operate the light fixture using a standard wall switch connected to the circuit. Flip the switch to turn the light on or off.
Adjusting Brightness (Dimming)
This fixture is compatible with most standard dimmer switches (not included). Connect the fixture to a compatible dimmer switch to adjust the brightness from 10% to 100%.
Image: Illustration of the dimmable function, showing the light can be adjusted from 10% to 100% brightness.
Color Temperature Selection (CCT)
The color temperature (CCT) is set during installation using a switch on the back of the fixture. You can choose from 3000K (Warm White), 3500K (Neutral White), 4000K (Cool White), 5000K (Daylight), or 6000K (Bright Daylight). To change the CCT after installation, you will need to remove the fixture from the ceiling.
Image: Visual guide to the 5 color temperature options, demonstrating the different light hues from warm to cool.
Maintenance
- Cleaning: Ensure the power is off before cleaning. Wipe the fixture with a soft, dry, or slightly damp cloth. Do not use harsh chemicals, abrasive cleaners, or solvents, as these can damage the finish or electrical components.
- Bulb Replacement: This fixture uses integrated LED technology and does not require bulb replacement. The LEDs are designed to last up to 50,000 hours.
- Inspection: Periodically check the fixture for any signs of damage or loose connections. If any issues are found, turn off the power and consult a qualified electrician.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. |
|
|
| Light flickers or dims unexpectedly. |
|
|
| Incorrect color temperature. | CCT switch set incorrectly during installation. | Turn off power, carefully remove the fixture, adjust the CCT switch on the back, and reinstall. |
Warranty and Support
This Wheatronic LED ceiling light fixture comes with a 12-month warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use.
For warranty claims, technical support, or any questions regarding your product, please contact our customer service team. We offer 24-hour online customer service to ensure the best shopping experience.
Please have your model number (C24) and purchase information ready when contacting support.
