1. Introduction
Thank you for choosing the Faber MAGNUS IN HC SC FL EBK 90 Kitchen Chimney. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new appliance. Please read this manual thoroughly before using the chimney and retain it for future reference.
1.1 Important Safety Instructions
- Ensure the electrical supply matches the voltage specified on the rating label.
- Installation must be performed by a qualified technician in accordance with local regulations.
- Do not operate the chimney without the filter in place (if applicable for other models, this model is filterless but general safety applies).
- Regular cleaning is crucial to prevent fire hazards from grease accumulation.
- Keep children away from the appliance during operation.
- Do not flambé under the chimney.
- Ensure adequate ventilation in the room when the chimney is used simultaneously with gas or other fuel-burning appliances.
2. Included Components
The following items are typically included with your Faber MAGNUS IN HC SC FL EBK 90 Kitchen Chimney:
- 1 x Faber Kitchen Chimney Unit
- 1 x User Manual
- Installation hardware (screws, wall plugs, etc. - may vary)
- Ducting pipe (may be sold separately or included depending on region)
3. Technical Specifications
| Feature | Specification |
|---|---|
| Model | MAGNUS IN HC SC FL EBK 90 |
| Mounting Type | Wall Mounted |
| Suction Power | 1500 m³/hr (1500 CMPH) |
| Controls Type | Touch & Gesture |
| Filter Type | Filterless |
| Special Features | Heat Auto Clean, Autoclean Alarm, Softlight |
| Noise Level | 38 dB |
| Light Source Type | LED |
| Voltage | 230 Volts |
| Annual Energy Consumption | 180 Kilowatt Hours Per Year |
| Item Weight | 20 Kilograms |
| Product Dimensions (LxWxH) | 48D x 60W x 54H Centimeters |
| Colour | Black |
| Finish Type | Powder Coated |
| Manufacturer | Franke Faber India Pvt Ltd |
4. Setup and Installation
The Faber MAGNUS IN HC SC FL EBK 90 is a wall-mounted kitchen chimney. Proper installation is crucial for its performance and safety. It is highly recommended that installation be carried out by a certified professional.
4.1 Pre-Installation Checklist
- Verify that the wall structure can support the weight of the chimney.
- Ensure a suitable electrical outlet is available within reach of the power cord.
- Confirm the availability of a proper ducting route for exhaust air.
- Unpack all components and check for any damage.
4.2 Installation Overview
- Mark the drilling points on the wall according to the provided template (if included) and the recommended height above the cooking surface.
- Drill holes and insert wall plugs.
- Secure the mounting bracket to the wall.
- Mount the chimney body onto the bracket.
- Connect the ducting to the chimney outlet and route it to the exterior. Ensure minimal bends for optimal airflow.
- Install the decorative chimney covers.
- Connect the chimney to the electrical supply.


5. Operating Instructions
Your Faber MAGNUS IN HC SC FL EBK 90 Kitchen Chimney features intuitive Touch and Gesture controls for ease of use.
5.1 Control Panel Overview

5.2 Touch Controls
- Power On/Off: Touch the power symbol to turn the chimney on or off.
- Speed Selection: Touch the '1', '2', '3' buttons to select the desired suction speed. '1' is the lowest, '3' is the highest.
- Light Control: Touch the light bulb symbol to turn the LED lights on or off.
- Autoclean Activation: Touch the autoclean symbol (often represented by a heating element or water droplet) to initiate the autoclean cycle.
5.3 Gesture Controls
The chimney can also be operated using hand gestures for convenience:
- Wave Left to Right: Typically turns the chimney on or increases the fan speed.
- Wave Right to Left: Typically turns the chimney off or decreases the fan speed.
- Refer to the specific gesture control guide in your product packaging for precise actions.
6. Maintenance and Cleaning
Regular maintenance ensures the longevity and optimal performance of your chimney. This model features filterless technology and an autoclean function.
6.1 Autoclean Function
The Heat Autoclean function uses a heating element to melt and collect grease particles into an oil collector. This significantly reduces manual cleaning effort.
- Ensure the chimney is off and cool before starting.
- Activate the Autoclean cycle via the touch control panel. The chimney will run for a set duration.
- After the cycle, allow the chimney to cool down.
- Carefully remove the oil collector tray (usually located at the bottom of the chimney) and dispose of the collected grease.
- Clean the oil collector with warm soapy water and reinsert it.

6.2 Exterior Cleaning
- Always disconnect the power supply before cleaning.
- Wipe the exterior surfaces with a soft cloth dampened with mild detergent and water.
- Do not use abrasive cleaners, steel wool, or harsh chemicals, as these can damage the finish.
- For glass surfaces, use a glass cleaner and a soft cloth to avoid streaks.
7. Troubleshooting
Before contacting customer service, please refer to the following common issues and their solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Chimney does not turn on | No power supply; loose connection; faulty switch | Check power outlet and circuit breaker; ensure power cord is securely plugged in; contact service if switch is faulty. |
| Low suction power | Ducting obstruction; improper installation; open windows/doors creating cross-drafts | Check ducting for blockages; ensure proper installation height and sealing; close windows/doors for better suction. |
| Unusual noise during operation | Loose components; foreign object in fan; motor issue | Ensure all parts are securely fastened; turn off and inspect for foreign objects (with power disconnected); contact service for motor issues. |
| Autoclean not effective | Oil collector full; heavy grease build-up | Empty and clean the oil collector; run autoclean cycle more frequently for heavy usage. |
8. Warranty Information
Your Faber MAGNUS IN HC SC FL EBK 90 Kitchen Chimney is covered by a comprehensive warranty:
- Product Warranty: 5 years on the entire product.
- Motor Warranty: 12 years on the motor.
This warranty covers manufacturing defects and faulty materials under normal domestic use. It does not cover damage caused by improper installation, misuse, accidents, unauthorized repairs, or normal wear and tear. Please retain your purchase receipt as proof of purchase for warranty claims.
9. Customer Support
For any technical assistance, service requests, or warranty claims, please contact Faber customer support:
- Refer to the contact information provided in your product packaging or on the official Faber website for your region.
- When contacting support, please have your model number (MAGNUS IN HC SC FL EBK 90) and purchase details ready.





