1. Safety Instructions
Please read these instructions carefully before assembly and use. Keep this manual for future reference.
- Ensure the power is OFF before installation, cleaning, or bulb replacement.
- This lamp is designed for indoor use only.
- Use only bulbs of the specified type and wattage (E26 base, max 60W incandescent or equivalent LED). Three 8W LED bulbs are included.
- Do not use abrasive cleaners or solvents on the lamp. Wipe with a soft, dry cloth.
- Position the lamp on a stable, level surface to prevent tipping.
- Keep the power cord away from heat sources, sharp edges, and wet areas.
2. Package Contents
Verify that all components are present before beginning assembly:
- Lamp Base
- Main Pole Sections (multiple)
- Arc Lamp Arms (3)
- Lamp Shades (3)
- E26 LED Bulbs (3)
- Assembly Hardware (screws, washers)
- Hexagonal Screwdriver
Image: All components included in the package for the 3-Light Floor Lamp.
3. Assembly Instructions
Follow these steps to assemble your DLLT Modern 3-Light Dimmable Floor Lamp:
- Install the Base: Carefully thread the power cord through the main pole section and secure it to the lamp base. Ensure the base is stable.
- Assemble the Main Pole: Connect the remaining main pole sections by twisting them clockwise until secure. Pull the power cord gently through each section as you connect them.
- Attach Arc Arms: Connect the three arc lamp arms to the top section of the main pole. Use the provided hexagonal screwdriver to tighten the small set screws on the connectors for reinforcement.
- Assemble Lamp Shades: Each lamp shade consists of a fabric wrap and two metal rings. Attach the fabric wrap to the metal rings using the Velcro strips. Ensure the fabric is taut and evenly distributed.
- Install Lamp Shades: Screw the assembled lamp shades onto the lamp holders at the end of each arc arm.
- Insert Bulbs: Carefully screw the three E26 LED bulbs into the lamp holders.
Image: Visual guide for lamp assembly, including connecting poles, attaching arc arms, and installing shades and bulbs.
Video: Detailed installation guide for the 3-Light Floor Lamp, demonstrating each step of assembly.
4. Operating Instructions
This floor lamp features a rotary dimmer switch and adjustable lamp arms for customized lighting.
- Power On/Off: Plug the lamp into a standard electrical outlet. Rotate the dimmer switch knob clockwise to turn the lamp on.
- Dimming Function: Continue rotating the dimmer switch knob clockwise to increase brightness (0% to 100%). Rotate counter-clockwise to decrease brightness and turn off the lamp.
- Adjusting Lamp Arms: The three arc lamp arms are 360° rotatable. Gently adjust each arm to direct light as desired.
Image: Illustration of the 0-100% stepless dimming brightness controlled by the rotary dimmer switch.
Image: The 360° rotatable lamp arms allow for easy adjustment to suit different lighting needs and decorative styles.
5. Maintenance
Regular maintenance ensures the longevity and optimal performance of your lamp.
- Cleaning: Disconnect the power before cleaning. Wipe the metal parts with a soft, dry cloth. For the fabric shades, use a lint roller or a soft brush to remove dust. Do not use liquid cleaners.
- Bulb Replacement: Ensure the lamp is unplugged and the bulbs have cooled down. Unscrew the old bulb and replace it with a new E26 base bulb (LED recommended).
- Cord Care: Periodically check the power cord for any signs of damage. If damaged, discontinue use and contact customer support.
6. Troubleshooting
If you encounter issues with your lamp, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not turn on. | No power, loose bulb, faulty switch. | Check power outlet, ensure plug is fully inserted. Tighten bulbs. Rotate dimmer switch fully clockwise. |
| Light flickers. | Loose bulb, incompatible bulb, unstable power. | Tighten bulbs. Ensure bulbs are dimmable LED or incandescent. Try a different outlet. |
| Dimming function not working. | Non-dimmable bulbs, faulty dimmer. | Ensure bulbs are dimmable. If issue persists, contact customer support. |
| Lamp is unstable. | Base not properly secured, uneven surface. | Ensure the main pole is tightly screwed into the base. Place on a flat, stable surface. |
7. Specifications
- Model Number: WS-MNF27-60B-WH
- Brand: DINGLILIGHTING
- Product Dimensions: 11.8"D x 11.8"W x 79"H
- Material: Metal
- Lamp Type: Floor Lamp
- Style: Modern
- Color: Black (frame) + White Linen Shades
- Power Source: Corded Electric
- Bulb Base: E26
- Bulbs Included: 3 x 8W LED Bulbs
- Dimmable: Yes (0%-100% stepless dimming)
8. Warranty and Support
DINGLILIGHTING products are manufactured to high-quality standards. For warranty information or technical support, please refer to the product packaging or contact your retailer. Keep your purchase receipt as proof of purchase.
For further assistance, please visit the DINGLILIGHTING store on Amazon: DINGLILIGHTING Store
