myFirst Camera Insta 20 User Manual

1. Introduction

This manual provides essential information for the safe and effective operation of your myFirst Camera Insta 20. Please read these instructions thoroughly before using the device and retain for future reference.

2. Product Overview

The myFirst Camera Insta 20 is a hybrid digital and instant print camera designed for children. It captures 16MP photos and 1080P videos, offering immediate thermal printing without ink. Key features include a PixTure OLED screen, dual lenses for selfies, and various creative filters.

Image: myFirst Camera Insta 20, highlighting its instant print capability.

Key Features:

• 16MP Photo Resolution: Capture high-quality digital images.
• 1080P Video Recording: Record clear videos.
• Instant Thermal Printing: Print black and white photos in 9 seconds without ink.
• PixTure OLED Screen: Second display for emojis, status, and charging information.
• Dual Lens: Front and rear lenses for regular photos and selfies.
• Built-in Filters & Frames: Enhance creativity with various effects.
• Lightweight & Portable: Designed for easy handling by children.

3. Package Contents

Verify that all items are present in the package:

• myFirst Camera Insta 20
• USB Charging Cable
• User Manual
• 2 Rolls of Thermal Paper
• 1 Roll of Thermal Sticker Paper
• 4GB Micro SD Card (pre-installed or separate)
• Neck Lanyard

4. Setup

4.1 Charging the Camera

Before first use, fully charge the camera. Connect the provided USB charging cable to the camera's Micro USB port and to a compatible USB power source (e.g., computer, wall adapter). The charging indicator on the PixTure OLED screen will show progress.

4.2 Inserting Micro SD Card

The camera supports Micro SD cards for storing digital photos and videos. Locate the Micro SD card slot on the side of the camera. Gently insert the 4GB Micro SD card (included) until it clicks into place. Ensure the card is inserted correctly to avoid damage.

Image: Side view of the camera, illustrating the Micro SD card slot and USB charging port.

4.3 Loading Thermal Paper

The myFirst Camera Insta 20 uses thermal paper for instant printing. Follow these steps to load a new roll:

1. Push the bottom button on the camera to release the cover case.
2. Remove the cover case and open the latch for the roll holder.
3. Place a new roll of thermal paper or thermal sticker paper into the compartment. Ensure the paper feeds correctly, with the printing side facing the thermal print head.
4. Close the latch and replace the cover case until it clicks securely.

Image: Step-by-step guide for replacing the thermal paper roll.

5. Operating Instructions

5.1 Power On/Off

To power on the camera, press and hold the power button located on the top of the device until the screen illuminates. To power off, press and hold the power button again until the screen shuts down.

5.2 Taking Photos

Once powered on, the camera defaults to photo mode. Frame your shot using the main display. Press the shutter button (usually a prominent button near the top) to capture a photo. The PixTure OLED screen may display fun emojis or status updates.

Image: Overview of camera features including 16MP, dual screen, and selfie lens.

5.3 Recording Videos

Navigate to video mode using the menu buttons. Press the shutter button once to start recording and again to stop. Videos are saved to the Micro SD card.

5.4 Using Filters and Frames

The camera includes various built-in filters and frames to add creativity to your photos. Use the navigation buttons to browse and select different options before taking a picture or applying them to existing photos.

Image: Examples of creative filters and frames applied to photos.

5.5 Instant Printing

After taking a photo, you can choose to print it instantly. The camera uses thermal printing technology to produce black and white prints in approximately 9 seconds. Simply press the dedicated print button. If using thermal sticker paper, the prints will have an adhesive backing.

Image: Illustrates the camera's 16MP photo and 1080p video capabilities.

5.6 Viewing Photos/Videos

Access the playback menu to view your captured photos and videos stored on the Micro SD card. Use the navigation buttons to scroll through your media.

5.7 Transferring Files

To transfer photos and videos to a computer, connect the camera using the USB cable. The camera will appear as a removable drive, allowing you to copy files directly. Alternatively, you can remove the Micro SD card and insert it into a card reader connected to your computer.

6. Maintenance

6.1 Cleaning the Camera

Use a soft, dry cloth to clean the exterior of the camera. Avoid using liquid cleaners or abrasive materials. For the lens, use a specialized lens cleaning cloth.

6.2 Replacing Thermal Paper

Refer to section 4.3 for detailed instructions on loading and replacing thermal paper rolls.

7. Troubleshooting

• Camera not turning on: Ensure the battery is charged. Connect to a power source and try again.
• Photos not printing: Check if thermal paper is loaded correctly (refer to section 4.3). Ensure the print mode is enabled in settings.
• Poor print quality: Verify the thermal paper is inserted with the correct side facing the print head. Adjust 'Print Density' in the camera settings.
• Cannot save photos/videos: Ensure a Micro SD card is properly inserted and has sufficient storage space.
• Camera unresponsive: Use a small pin to press the reset button (located near the charging port) to restart the device.

8. Specifications

9. Warranty and Support

Your myFirst Camera Insta 20 comes with a 1-year manufacturer's limited warranty. For warranty claims or technical support, please contact myFirst customer service through their official website or the retailer where the product was purchased. Keep your proof of purchase for warranty validation.