uwant Wet Dry Vacuum Cleaner D100 User Manual

1. Introduction

Thank you for choosing the uwant D100 Wet Dry Vacuum Cleaner. This appliance is designed to provide efficient and convenient cleaning for hard floors, combining vacuuming and mopping functions. Its advanced features, including smart AI suction adjustment, 180° lay-flat design, dual-sided edge cleaning, and an automatic self-cleaning system, aim to simplify your cleaning routine. Please read this manual thoroughly before operating the device to ensure proper use, maintenance, and to maximize its performance and lifespan.

2. Important Safety Instructions

To reduce the risk of fire, electric shock, or injury, always follow basic safety precautions when using an electrical appliance.

• Read all instructions before using the appliance.
• Use only as described in this manual. Use only uwant recommended attachments.
• Do not immerse the appliance in water or other liquids.
• Do not use on wet surfaces unless specifically designed for wet pickup.
• Do not pick up flammable or combustible liquids, such as gasoline, or use in areas where they may be present.
• Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.
• Keep hair, loose clothing, fingers, and all parts of body away from openings and moving parts.
• Turn off all controls before unplugging.
• Use extra care when cleaning on stairs.
• Do not use without filters in place.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons in order to avoid a hazard.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.

3. Package Contents

Please check the package contents to ensure all items are present and undamaged.

• uwant Wet Dry Vacuum Cleaner (Main Unit)
• Charging Dock
• Cleaning Solution (16.9 oz)
• HEPA Filters (2 pcs)
• Rolling Mops (2 pcs)

Figure 3.1: Included Accessories. This image displays the uwant D100 Wet Dry Vacuum Cleaner main unit on its charging dock, alongside two HEPA filters, two rolling mop brushes, and a bottle of deep cleaning solution.

Figure 3.2: uwant D100 Wet Dry Vacuum Cleaner and its components. The image shows the main vacuum cleaner unit, two spare roller brushes, two spare HEPA filters, and a bottle of cleaning solution.

4. Product Overview

Familiarize yourself with the main components of your uwant D100 Wet Dry Vacuum Cleaner.

Figure 4.1: 180° Lay-Flat Design. This image demonstrates the vacuum cleaner's ability to lay almost completely flat, allowing it to reach and clean under low-clearance furniture like sofas.

Figure 4.2: Push-in Docking. The image illustrates the ease of docking the vacuum cleaner into its charging station by simply pushing it forward, eliminating the need to lift the unit.

5. Setup

5.1 Assembly

1. Unpack all components from the box.
2. Insert the handle into the main body of the vacuum cleaner until it clicks securely into place.
3. Place the charging dock on a flat, stable surface near a power outlet.

5.2 Initial Charging

Before first use, fully charge the vacuum cleaner.

1. Connect the power adapter to the charging dock and plug it into a wall outlet.
2. Place the vacuum cleaner onto the charging dock. Ensure it is properly seated for charging to begin.
3. The battery indicator lights will show the charging status. A full charge typically takes approximately 5 hours.

5.3 Filling the Clean Water Tank

The clean water tank supplies water and cleaning solution for mopping.

1. Remove the clean water tank from the main unit.
2. Open the tank cap.
3. Fill the tank with clean tap water up to the MAX fill line.
4. Add the recommended amount of uwant cleaning solution (or other compatible non-foaming cleaning solution) as indicated on the solution bottle or tank. Do not overfill.
5. Close the tank cap securely and reattach the tank to the main unit.

6. Operating Instructions

6.1 Powering On/Off

• To power on, press the Power button located on the handle.
• To power off, press the Power button again.

6.2 Cleaning Modes and Smart AI Suction Adjustment

The uwant D100 features Smart AI technology that automatically adjusts suction power and water flow based on the detected dirt level. You can also manually adjust water output.

• Smart AI Mode: The vacuum cleaner will intelligently detect the type and amount of debris, adjusting its cleaning power accordingly for optimal results.
• Manual Water Output: Use the controls on the handle to select one of three water output levels to suit your cleaning needs (e.g., less water for light spills, more for heavy stains).

Figure 6.1: Smart Suction Adjustment. This image illustrates the vacuum cleaner's ability to adapt its suction and water flow for different types of messes, from small stains to moderate and heavy stains, ensuring efficient cleaning.

6.3 180° Lay-Flat Design

The 180° lay-flat design allows the vacuum cleaner to reach under low furniture with ease.

• Simply tilt the main unit back until it lies flat to clean under beds, sofas, and other low-clearance areas.

Figure 6.2: 180° Lay-Flat Flexibility. The image shows the vacuum cleaner positioned horizontally to clean underneath a sofa, highlighting its flexible design for reaching tight spaces.

6.4 Dual-Sided Edge Cleaning

The dual-sided edge cleaning feature ensures thorough cleaning along baseboards and in corners.

• Maneuver the vacuum cleaner close to walls and furniture edges to utilize this feature.

Figure 6.3: Dual-sided Edge Cleaning. This image shows two individuals operating the vacuum cleaner, illustrating its capability to clean right up to the edges of walls and cabinets, ensuring no dirt is missed.

6.5 Odor Removal System

The built-in odor removal system helps to keep your home smelling fresh by neutralizing unpleasant smells from the dirty water tank.

• This system operates automatically during and after cleaning.

Figure 6.4: Anti-Odor Stick. This image highlights the anti-odor feature of the uwant D100, showing a clean water tank with a blue glow, implying freshness, in contrast to a green, smelly tank from a generic vacuum.

6.6 Battery Runtime

The uwant D100 provides up to 40 minutes of continuous cleaning on a full charge, covering approximately 2500 square feet.

Figure 6.5: Extended Cleaning Sessions. This image depicts multiple individuals cleaning a spacious home environment with the uwant D100, suggesting its long battery life and ability to cover large areas up to 2500 square feet.

7. Maintenance

Regular maintenance ensures optimal performance and extends the lifespan of your uwant D100.

7.1 Automatic Self-Cleaning System

After each use, place the vacuum cleaner on the charging dock to activate the self-cleaning cycle.

• Ensure there is sufficient clean water in the clean water tank for the self-cleaning cycle.
• Press the Self-Clean button on the handle or dock. The system will rinse the roller brush and internal pathways.

Figure 7.1: 100% Auto Self-Clean System. This image shows the vacuum cleaner on its dock, with an internal view of the self-cleaning process and a comparison of the roller brush before and after cleaning, highlighting its effectiveness.

7.2 Hot Air Drying

After the self-cleaning cycle, the hot air drying function will activate to dry the roller brush and prevent odors.

• This process helps to keep the brush hygienic and ready for the next use.

7.3 Emptying the Dirty Water Tank

Empty the dirty water tank after each use to prevent odors and maintain suction power.

1. Remove the dirty water tank from the main unit.
2. Open the tank and dispose of the dirty water and solid debris.
3. Rinse the tank thoroughly with clean water.
4. Reattach the tank to the main unit.

7.4 Cleaning the Brush Core (IPX6 Washable)

For a deeper clean, the roller brush core can be manually rinsed.

1. Remove the roller brush from the vacuum cleaner.
2. Under running water, rinse the brush core until clean. The IPX6 waterproof technology allows for direct rinsing.
3. Allow the brush to air dry completely before reinserting it into the vacuum cleaner.

7.5 Cleaning the Charging Base Tray

The charging base tray is detachable for easy cleaning.

• Remove the tray from the charging base.
• Rinse it under running water to remove any accumulated dirt or debris.
• Dry thoroughly before placing it back on the charging base.

7.6 HEPA Filter Maintenance

Regularly clean the HEPA filters to maintain optimal suction and air quality.

• Remove the HEPA filter from its compartment.
• Tap the filter gently over a trash can to remove loose dust.
• If necessary, rinse the filter under cool running water. Ensure it is completely dry before reinserting.
• Replace HEPA filters every 3-6 months, or as needed, depending on usage.

8. Troubleshooting

If you encounter issues with your uwant D100, refer to the following common problems and solutions.

If the problem persists after trying these solutions, please contact uwant customer support for further assistance.

9. Specifications

10. Warranty and Support

The uwant D100 Wet Dry Vacuum Cleaner comes with a standard manufacturer's warranty. Please refer to the warranty card included in your product packaging for specific terms and conditions, including warranty period and coverage details.

For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact uwant customer service through their official website or the contact information provided in your product documentation.

Online Support: Visit the official uwant website for FAQs, support articles, and contact options.