Introduction
The SPECIAL PIE M1A2+ Shot Timer is an upgraded device designed for precise shot detection and timing in various shooting competitions and training scenarios. It is an official IROA Shot Timer, trusted by Range Officers and competitors in IPSC Level IV & V matches, and proven in real-world conditions across USPSA, IPSC, IDPA, PRS, 3-Gun, CAS, and more. Featuring advanced sound detection technology, a long-lasting rechargeable battery, and an easy-to-read display, this timer is built to enhance your shooting performance and match preparation.
Image: The SPECIAL PIE M1A2+ Shot Timer, showcasing its display and compact design.
Included Components
Your SPECIAL PIE M1A2+ Shot Timer package includes the following items:
- Black M1A2+ Shot Timer (x1)
- Belt Clip (x1)
- USB Charging Cable (x1)
- Lanyard (x1)
- User Guide (x1)
Setup and Basic Operation
Power On/Off
To power on the device, hold down the power button (typically the right-side button) for approximately 3 seconds. The screen will illuminate, and the device will be ready for use. To power off, repeat the same action by holding down the power button for 3 seconds.
Video: Demonstrates how to power on and off the shot timer, and adjust volume and sensitivity settings.
Image: Diagram illustrating the main buttons and their functions on the shot timer, including power on/off.
Charging the Battery
The M1A2+ Shot Timer features a 1000mAh built-in battery, providing up to 72 hours of continuous use per charge. Use the provided USB-C charging cable to recharge the device. This eliminates the need for disposable batteries and ensures minimal downtime.
Image: Visual representation of the shot timer's 72-hour battery life and 1000mAh capacity.
Operating Modes
The shot timer offers various modes to suit different training and competition needs.
Delay Modes (Instant, Random, Fixed, Customized)
The delay mode determines the time between pressing the start button and the first beep. You can access these settings through the device's menu.
- Instant Mode: The timer starts immediately upon pressing the start button.
- Random Mode: The timer will initiate the start beep randomly within a specified range (e.g., 3-5 seconds).
- Fixed Mode: The timer will start after a fixed, user-defined delay (e.g., up to 10 seconds).
- Customized Mode: Allows for more specific delay settings.
Video: Comprehensive operating instructions for the shot timer, including setting delay modes.
Par Mode
Par Mode is ideal for dry fire training and setting specific time limits for drills. You can set both the time duration and the number of cycles (repetitions) for the par mode. This allows for consistent and repeatable training sessions.
Video: Detailed explanation and demonstration of setting and using Par Mode with delay options.
Countdown Function (Walkthrough Mode)
The built-in RO Mode, also known as Walkthrough Mode, is perfect for pre-stage walkthroughs and limited-time events in shooting competitions. It can emit three timed beeps over 60 seconds followed by one long beep, eliminating the need for a separate countdown timer or phone app.
Image: Illustration of the Walkthrough Mode settings, showing options for minutes and seconds countdown.
Adjusting Settings
Volume and Sensitivity
The timer allows for adjustment of both beep tone volume and shot detection sensitivity. This ensures optimal performance in various environments and with different firearm types.
- Volume: Adjust the loudness of the timer's beeps. The device can produce sounds up to 120 dB, ensuring audibility even with ear protection.
- Sensitivity: Adjust the microphone's sensitivity to detect shots. This is crucial for accurate timing with different calibers and in varying acoustic environments (indoor/outdoor, echo filtering). The timer supports 9 levels of sensitivity, suitable for 9mm, LR22, airsoft, rifles, shotguns, and dry fire.
Image: The shot timer demonstrating its high volume output, audible even with ear protection.
Image: The smart sensor of the shot timer, indicating compatibility with various ammunition types like Shotgun/Rifles, 9MM, LR22, and also for Dry Fire and Airsoft/BB.
Checking History Scores
The timer stores historical shot data. You can review past scores, including split times and overall times for different strings of shots. This feature is essential for tracking progress and analyzing performance.
Video: Demonstrates how to check history scores on the shot timer.
Bluetooth Connectivity with PractiScore App
The SPECIAL PIE M1A2+ Shot Timer features Bluetooth connectivity, allowing it to seamlessly integrate with the PractiScore App for enhanced scoring and data management. Ensure Bluetooth is enabled on both your timer and mobile device.
Image: The shot timer displaying real-time sync with mobile devices running PractiScore App, showing instant transmission of match data.
Video: A user guide demonstrating the features of the M1A2-F timer, including Bluetooth connectivity with the PractiScore App.
Connecting to Stop Target Plate
For advanced training, the timer can connect to a stop target plate. This requires ensuring both devices share the same RFID (Radio-Frequency Identification) channel. If they do not connect automatically, you may need to manually adjust the RFID settings on the timer to match the target.
Video: Instructions on how to connect the shot timer to a stop target plate, including troubleshooting RFID issues.
Maintenance
To ensure the longevity and optimal performance of your SPECIAL PIE M1A2+ Shot Timer, follow these maintenance guidelines:
- Cleaning: Wipe the device with a soft, dry cloth. Avoid using abrasive cleaners or solvents that could damage the plastic material.
- Storage: Store the timer in a cool, dry place away from direct sunlight and extreme temperatures.
- Battery Care: Recharge the battery regularly, even if not in frequent use, to maintain battery health. Avoid fully discharging the battery for extended periods.
- Physical Protection: While durable, avoid dropping the device or subjecting it to excessive impact.
Troubleshooting
If you encounter issues with your shot timer, consider the following common solutions:
- Timer not turning on: Ensure the battery is charged. Connect the USB-C cable and allow it to charge for a period before attempting to power on again.
- Inaccurate shot detection: Adjust the sensitivity settings. Higher sensitivity (e.g., level 9 for dry fire) may be needed for quieter sounds or specific gun types. Ensure the timer is positioned correctly to pick up the sound.
- Bluetooth connectivity issues: Ensure Bluetooth is enabled on both the timer and your mobile device. Check that the PractiScore App is updated to the latest version. Restart both devices and attempt to pair again.
- Timer not connecting to stop target: Verify that the RFID channels on both the timer and the stop target are set to the same number. Refer to the "Connecting to Stop Target Plate" section for detailed instructions.
- Display difficult to read: Ensure the backlit screen is active. The bright display is designed for visibility in direct sunlight.
Specifications
| Feature | Detail |
|---|---|
| Model Name | M1A2+ Shot Timer |
| Color | Black |
| Material | Plastic |
| Product Dimensions (LxWxH) | 0.98"D x 2.67"W x 3.35"H |
| Item Weight | 3.2 ounces |
| Screen Size | 3 Inches |
| Battery Life | Up to 72 hours per charge |
| Connectivity | Bluetooth |
| UPC | 681381461460 |
Warranty and Support
The SPECIAL PIE M1A2+ Shot Timer comes with a 1-year warranty from the date of purchase. For technical support, troubleshooting assistance, or warranty claims, please refer to the official user guide included in your package or visit the SPECIAL PIE website.
You can also find additional resources and user guides in PDF format:
