Torkase SF20250910B0DSFS4R5B_1

Torkase PAR38 Motion Sensor LED Flood Light Bulb User Manual

Model: SF20250910B0DSFS4R5B_1

1. Introduction

Thank you for choosing the Torkase PAR38 Motion Sensor LED Flood Light Bulb. This manual provides essential information for the safe and effective installation, operation, and maintenance of your new light bulbs. Please read these instructions thoroughly before use and retain them for future reference.

Torkase PAR38 Motion Sensor LED Flood Light Bulb

Image 1.1: Torkase PAR38 Motion Sensor LED Flood Light Bulb, showing its design and E26 base.

2. Product Features

Internal components of Torkase PAR38 LED bulb with PIR motion sensor and photocell sensor

Image 2.1: Diagram illustrating the internal components, including the built-in photocell sensor and PIR motion sensor, highlighting the 30ft PIR detection distance.

3. Specifications

Dimensions of Torkase PAR38 LED bulb: 1.97 inches width, 2.17 inches height, E26 base

Image 3.1: Specific dimensions of the Torkase PAR38 LED bulb, showing its width, height, and E26 base.

AttributeValue
BrandTorkase
Light TypeLED
Wattage20 Watts
Bulb Shape SizePAR38
Bulb BaseE26
Light Color5000K Daylight (Cool White)
Voltage100-240 Volts
Brightness2000 Lumens
Indoor/Outdoor UsageIndoor, Outdoor
Special FeaturesPIR Motion Sensor, Dusk to Dawn Sensor
DimmableNo (Not Dimmable)
Product Dimensions1.97"W x 2.17"H
Item Weight14.9 ounces
Lifespan30,000 Hours
Included Components2 x PAR38 Flood LED Light Bulbs

4. Safety Information

Please observe the following safety precautions to prevent injury or damage:

5. Setup and Installation

Follow these steps for proper installation:

  1. Power Off: Before installation, ensure the power to the light fixture is turned off at the main circuit breaker to prevent electrical shock.
  2. Remove Old Bulb: Carefully unscrew and remove the existing bulb from the fixture.
  3. Install New Bulb: Screw the Torkase PAR38 Motion Sensor LED Flood Light Bulb into the E26 base socket until it is snug. Do not overtighten.
  4. Positioning: Ensure the motion sensor on the bulb is facing the desired detection area. The bulb should be mounted 8-15 feet above the ground for optimal performance. The sensor part must not be covered by the fixture.
  5. Power On: Restore power at the circuit breaker.
Installation tips for Torkase motion sensor light bulb, showing correct and incorrect fixture types

Image 5.1: Visual guide for installation, demonstrating suitable open fixtures and unsuitable enclosed fixtures for the motion sensor bulb.

6. Operating Instructions

The Torkase PAR38 Motion Sensor LED Flood Light Bulb is designed for automatic operation:

Sequence showing Torkase motion sensor light bulb operation: off in daylight, on with motion in dark, off after 40 seconds

Image 6.1: Illustration of the motion sensor functionality, showing the bulb remaining off during the day and activating for 40 seconds when motion is detected at night.

Video 6.1: Official Torkase video demonstrating the motion sensor light bulb's activation and deactivation in an outdoor setting.

7. Maintenance

These LED bulbs require minimal maintenance:

8. Troubleshooting

ProblemPossible CauseSolution
Bulb does not turn on.No power, switch off, ambient light too high, sensor obstructed.Check power supply. Ensure light switch is ON. Verify ambient light is below 15 lux. Ensure sensor is not covered.
Bulb stays on continuously.Constant motion detected, sensor malfunction, ambient light too low.Ensure no continuous motion in detection area. Check for sensor obstruction. Verify ambient light is above 15 lux during the day.
Motion sensor not sensitive enough.Incorrect installation angle/height, sensor obstructed.Adjust the angle and height of the bulb installation to direct the sensor towards the desired detection area. Ensure the sensor is not obstructed.
Bulb flickers.Loose connection, incompatible fixture.Turn off power, tighten bulb. Ensure fixture is suitable for LED bulbs.

9. Warranty and Support

Torkase stands behind its products with a 3-year warranty.

If you require assistance, have questions, or encounter any issues with your Torkase PAR38 Motion Sensor LED Flood Light Bulbs, please contact us through your Amazon order. Warranty services are only available for orders placed directly from the Torkase store.