1. Introduction
Thank you for choosing the Auveach Automatic Pet Feeder F19-L. This device is designed to provide scheduled meals for your pets, ensuring they receive fresh food even when you are away. It supports both wet and dry food, featuring a timed dispensing system and integrated ice packs for extended freshness. Please read this manual thoroughly before use and retain it for future reference.
2. Safety Information
- Always keep the feeder on a stable, level surface to prevent tipping.
- This appliance is intended for use with pets only. Do not allow children to play with the feeder.
- Use only 3 AA batteries (not included) for power. Do not mix old and new batteries, or different types of batteries.
- Do not immerse the main unit (containing the electronic components) in water. Only the food tray and lid are dishwasher safe.
- Ensure the lid is securely locked to prevent pets from accessing food prematurely or tampering with settings.
- Regularly inspect the feeder for any damage. Discontinue use if damaged.
- Do not use the feeder for aggressive chewers, as they may damage the unit.
3. Product Overview
The Auveach Automatic Pet Feeder F19-L is equipped with six individual compartments, an LED touch panel for programming, and a unique design for maintaining food freshness.
Key Features:
- 6 Meal Capacity: Each compartment holds up to 200ml of food, suitable for various food types including dry, wet, freeze-dried, and canned.
- Freshness Preservation: Includes two removable ice packs to keep wet food fresh for extended periods (1-8 hours at zero degrees, 9-24 hours at low temperature, depending on ambient conditions).
- Smart Programming: LED touch panel allows for personalized feeding schedules, up to six meals per day, with a time memory function.
- Pet-Friendly Design: Features active recognition anti-jamming technology to protect pets during feeding and a secure lid lock to prevent accidental opening.
- Easy to Clean: Modular design with a removable movement unit. The food tray and lid are dishwasher safe.
- Cordless Operation: Powered by 3 AA batteries (not included) for flexible placement and approximately 180 days of use (based on 3 meals/day).
Figure 1: Auveach Automatic Pet Feeder F19-L (Top View)
4. Setup
4.1 Unpacking
- Carefully remove all components from the packaging.
- Verify that all parts are present: main feeder unit, food tray (ABS or stainless steel), lid, and two ice packs.
- Remove any protective films or packaging materials.
4.2 Battery Installation
- Turn the main feeder unit upside down.
- Locate the battery compartment cover and open it.
- Insert 3 new AA batteries (not included), ensuring correct polarity (+/-).
- Close the battery compartment cover securely.
Figure 2: Wireless Operation and Battery Power
4.3 Ice Pack Preparation and Placement
- Place the two included ice packs in a freezer for at least 6-8 hours until completely frozen.
- Once frozen, place the ice packs into the designated slots at the bottom of the feeder unit, beneath the food tray.
Figure 3: Ice Pack Placement for Freshness
4.4 Tray Installation
- Ensure the main unit is clean and the ice packs are in place.
- Align the food tray with the central rotating mechanism and gently press it down until it sits securely.
5. Operating Instructions
5.1 Powering On/Off
The feeder automatically powers on once batteries are installed. To conserve battery life, the display will dim after a period of inactivity but the timer will continue to run.
5.2 Setting the Current Time
- Press and hold the 'SET' button until the hour digit flashes.
- Use the '+' and '-' buttons to adjust the hour.
- Press 'SET' again to move to the minute digit, then adjust with '+' and '-'.
- Press 'SET' to confirm the time. You can switch between 12-hour and 24-hour format by pressing and holding the '+' button during time setting.
5.3 Programming Feeding Times (Up to 6 Meals)
- Press the 'SET' button once to enter the feeding schedule setting mode (P1 will flash).
- Use '+' and '-' to set the desired hour for the first meal (P1).
- Press 'SET' to move to the minute setting for P1, then adjust.
- Press 'SET' to confirm P1 and move to P2. Repeat steps for up to 6 meals (P1-P6).
- To disable a meal time, set its time to 'OFF' using the '+' or '-' buttons.
- After setting all desired meal times, press 'SET' repeatedly until the display returns to the current time. The feeder will now dispense food at the programmed times.
Figure 4: LED Touch Panel and Meal Programming
5.4 Filling Compartments
- Open the lid by sliding the lock mechanism.
- Fill each compartment with the desired amount of wet or dry pet food, up to 200ml per slot.
- Ensure food does not overfill the compartments or obstruct the rotating mechanism.
- Close the lid securely and engage the lock mechanism.
Figure 5: Food Compartments and Types
5.5 Manual Feeding
To dispense a meal manually, press the 'MANUAL' button. The tray will rotate one position, dispensing the next meal. This will not affect the programmed schedule.
6. Maintenance and Cleaning
Regular cleaning ensures hygiene and extends the life of your pet feeder.
6.1 Disassembly for Cleaning
- Ensure the feeder is turned off or remove batteries before cleaning.
- Remove the lid.
- Gently lift the food tray from the main unit.
- Remove the ice packs from their slots.
6.2 Cleaning Components
- Food Tray and Lid: These parts are dishwasher safe. Alternatively, wash them by hand with warm, soapy water and rinse thoroughly. Ensure they are completely dry before reassembly.
- Main Feeder Unit: Wipe the exterior and the central rotating mechanism with a damp cloth. Do not immerse the main unit in water or allow water to enter the battery compartment or electronic components.
- Ice Packs: Wipe clean with a damp cloth.
Figure 6: Dishwasher Safe Components
6.3 Reassembly
Once all parts are clean and dry, reassemble the feeder by following the disassembly steps in reverse order.
6.4 Battery Replacement
When the battery indicator on the LED display shows low power, replace all 3 AA batteries with new ones. The time memory function will retain your settings for a short period during battery replacement.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Feeder does not turn on. | Batteries are dead or incorrectly installed. | Replace with new AA batteries, ensuring correct polarity. |
| Food is not dispensing at scheduled times. | Incorrect time setting or meal programming. Batteries are low. Food is jammed. | Verify current time and programmed meal times. Replace batteries. Check for obstructions in the food compartments or rotating mechanism. |
| Food spoils quickly. | Ice packs not frozen or not used. High ambient temperature. | Ensure ice packs are fully frozen and correctly placed. Consider feeder placement in cooler areas during hot weather. |
| Lid opens easily or pet accesses food. | Lid not securely locked. | Ensure the lid is properly closed and the locking mechanism is engaged. |
| Display is not responding. | Low batteries or temporary electronic glitch. | Replace batteries. If issue persists, remove batteries for 1 minute and reinsert. |
8. Specifications
| Feature | Specification |
|---|---|
| Model Number | F19-L |
| Material | Plastic, Stainless Steel |
| Target Species | Cat, Dog |
| Capacity (per compartment) | 200ml |
| Total Capacity | 1.2 litres (6 x 200ml) |
| Dimensions (L x W x H) | 31L x 31W x 7.5H centimetres |
| Item Weight | 2.1 Kilograms |
| Power Source | 3 x AA Batteries (not included) |
| Number of Meals | Up to 6 per day |
| Special Features | Timer, Ice Packs, Anti-Jam Technology, Lid Lock |
| Dishwasher Safe Parts | Food Tray, Lid |
9. Warranty and Support
The Auveach Automatic Pet Feeder F19-L comes with a standard manufacturer's warranty. Please refer to your purchase documentation or the retailer's website for specific warranty terms and conditions.
For technical support, troubleshooting assistance, or warranty claims, please contact Auveach customer support through the platform where you purchased the product or visit the official Auveach website for contact information.