1. Introduction and Safety Information
This manual provides essential instructions for the safe and efficient use of your T POWER 42V AC DC Adapter. This charger is designed to provide reliable power for compatible Evercross electric scooters and bikes. Please read this manual thoroughly before use and retain it for future reference.
The T POWER adapter is UL, CE, and RoHS certified, ensuring high safety standards. It incorporates advanced protection features including Over Voltage Protection, Over Current Protection, Short-circuit Protection, and Over-Temp Protection to safeguard your device and prolong battery life.
Image: T POWER charger highlighting its superior safety protection features.
2. Compatibility
This T POWER 42V AC DC Adapter is compatible with the following Evercross models:
- Evercross EV10Z, EV08E, EV08S, EV10K, EV10K Pro, EV12M Electric Scooter (Model: HLT-180-4202000)
- Evercross EV5 8.5" Electric Scooter (Peak Power 350W, 36V Lithium-ion Li-ion Battery Pack, Model: HLT-118C-4201000)
- Evercross HY-A21 HYA21 (Model: HLT-118C-4201000)
- Evercross EV12M Electric Dirt Bike (Model: HLT-118C4201000)
Always verify the voltage and connector type of your device before connecting the charger. This charger features both a barrel round tip and a 3-prong connector for broad compatibility.
Image: Example of a compatible Evercross Hoverboard.
Image: Example of a compatible Evercross Electric Scooter.
Image: Example of a compatible Evercross Electric Dirt Bike.
3. Setup Instructions
To set up your T POWER 42V AC DC Adapter:
- Ensure the charger is disconnected from the power outlet.
- Locate the charging port on your Evercross electric scooter or bike.
- Connect the appropriate connector (barrel round tip or 3-prong) from the charger to your device's charging port. Ensure a secure connection.
- Plug the AC power cord of the charger into a standard AC 100V - 240V wall outlet.
- The LED indicator on the charger will illuminate, indicating the charging status.
Image: The T POWER 42V AC DC Adapter, showing its connectors.
4. Operating Instructions
The T POWER charger features an LED indicator to display its operational status:
- RED Light (Solid): Charging in progress.
- GREEN Light (Solid): Charge complete or charger disconnected from the device.
Important Note: The 36V mentioned in your device's specifications refers to the battery's voltage, not the charger's output voltage. This charger provides 42V DC output, which is the correct voltage for charging 36V battery packs.
5. Maintenance
To ensure the longevity and optimal performance of your T POWER charger:
- Keep the charger in a dry environment, away from moisture and extreme temperatures.
- Avoid dropping or subjecting the charger to physical impact.
- Regularly inspect the power cord and connectors for any signs of damage. Do not use if damaged.
- Unplug the charger from the wall outlet when not in use for extended periods.
- Clean the charger with a soft, dry cloth. Do not use liquid cleaners.
6. Troubleshooting
If you encounter issues with your T POWER charger, refer to the following:
- No LED Indicator Light: Ensure the charger is securely plugged into a working wall outlet and the device. Check the wall outlet with another appliance.
- LED Remains RED (Charging) for Extended Periods: This may indicate a deeply discharged battery or a potential issue with the battery itself. Allow sufficient time for charging. If the light never turns green, consult your device's manual or support.
- LED Flashing RED (Fast): This typically indicates a defective charger or a fault in the charging circuit. Disconnect immediately and contact support.
- LED Flashing RED (Fast & Slow): This may signal a temperature anomaly. Disconnect the charger and allow it to cool down in a well-ventilated area before attempting to charge again.
- Device Not Charging: Verify that the charger's connector is fully inserted into the device's charging port. Ensure the charger is compatible with your specific device model.
If troubleshooting steps do not resolve the issue, please contact T POWER customer support.
7. Specifications
| Feature | Specification |
|---|---|
| Input Voltage Range | AC 100V - 240V |
| Output Voltage | 42 Volts (DC) |
| Amperage | 1.5 Amps |
| Wattage | 80 watts |
| Connector Type | Barrel connector, 3-pin |
| Product Dimensions | 4.5 x 2 x 1.25 inches |
| Item Weight | 8 ounces |
| Certifications | UL, CE, RoHS |
8. Warranty and Support
T POWER products are designed for reliability and performance. This product comes with a 1-Year Limited Manufacturer Warranty covering quality-related issues. In the event of a defect, an easy exchange or replacement will be provided.
Additionally, T POWER offers a 30-Day Return for Any Reason policy. You may return your undamaged product and packaging within 30 days of purchase for a full refund.
For technical support, warranty claims, or any inquiries regarding your T POWER adapter, please contact the seller directly through your purchase platform or visit the official T POWER store online. Our support team is available to assist you with compatibility questions or any issues you may encounter.