LEFXMOPHY Power Adapter Instruction Manual

Introduction

Thank you for choosing the LEFXMOPHY Power Adapter. This manual provides essential information for the safe and efficient use of your new power adapter. Please read these instructions carefully before use and retain them for future reference.

This power adapter is designed as a replacement or spare for compatible devices, specifically the eufy Homebase 2 models T8010 and T8010X, and the AOSU Wi-Fi HomeBase Model H1L.

Product Overview

Key Features:

• Compatibility: Specifically designed for eufy Homebase 2 (T8010, T8010X) and AOSU Wi-Fi HomeBase (H1L).
• Cable Length: Features a 5-foot (150 cm) power cord for flexible placement.
• Safety Certified: UL listed driver ensures safety and reliability.
• Input Voltage: Operates with a wide input voltage range of 100 to 240V AC.
• Connector Type: Equipped with a standard DC round barrel plug connector.

What's in the Box:

• 1 x LEFXMOPHY Power Adapter

Image 1: The LEFXMOPHY Power Adapter, showing the wall plug and the attached 5-foot power cord with a DC barrel connector.

Safety Information

• Use only with compatible devices as specified (eufy Homebase 2 T8010/T8010X, AOSU HomeBase H1L).
• Do not expose the adapter to water, moisture, or extreme temperatures.
• Avoid dropping or subjecting the adapter to severe impact.
• Do not attempt to open or modify the adapter. This will void any warranty and may cause damage or injury.
• Ensure the power outlet is easily accessible and properly grounded.
• Unplug the adapter during lightning storms or when unused for extended periods.
• Keep out of reach of children.

Setup Instructions

1. Verify Compatibility: Confirm that your device is either a eufy Homebase 2 (models T8010 or T8010X) or an AOSU Wi-Fi HomeBase (model H1L). This adapter is not for cameras directly.
2. Connect to Device: Insert the DC round barrel plug of the LEFXMOPHY Power Adapter into the power input port of your compatible Homebase device. Ensure a snug fit.


Image 2: The LEFXMOPHY Power Adapter's DC barrel connector inserted into the power input port of a compatible Homebase device.

3. Plug into Power Outlet: Insert the AC plug of the power adapter into a standard 100-240V AC wall outlet.
4. Power On Device: Once connected, your Homebase device should power on automatically or can be powered on using its designated power button, if applicable.

Operating Instructions

The LEFXMOPHY Power Adapter functions as a direct power supply for your compatible Homebase device. Once properly connected to both the device and a power outlet, it continuously supplies the necessary power.

• Ensure the adapter is always connected to a stable power source.
• If your Homebase device has an indicator light, observe it to confirm power reception.
• To disconnect power, first unplug the adapter from the wall outlet, then from the Homebase device.

Maintenance

• Cleaning: Disconnect the adapter from power before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or aerosols.
• Storage: When not in use, store the adapter in a cool, dry place, away from direct sunlight and moisture. Avoid tightly coiling the cable to prevent damage.
• Inspection: Periodically inspect the power cord and adapter housing for any signs of damage, such as cuts, fraying, or cracks. If damage is observed, discontinue use immediately and replace the adapter.

Image 3: A diagram illustrating the internal construction of the power cord, highlighting the "Bold pure copper core" and the 5-foot length.

Troubleshooting

No Power to Device:

• Check Connections: Ensure the DC barrel plug is fully inserted into the Homebase device and the AC plug is firmly seated in the wall outlet.
• Test Outlet: Plug another working appliance into the same wall outlet to confirm it is receiving power.
• Inspect Adapter: Look for any visible damage to the adapter or cable. If damaged, discontinue use.
• Verify Compatibility: Double-check that your device model is listed as compatible with this adapter.

Adapter Feels Warm:

• It is normal for power adapters to become slightly warm during operation. However, if the adapter becomes excessively hot to the touch or emits a burning smell, unplug it immediately and discontinue use.

Specifications

Image 4: The label on the power adapter, displaying input voltage (AC 100-240V, 50/60Hz) and UL certification marks.

Warranty and Support

For warranty information or technical support, please refer to the seller's policy on the platform where the product was purchased. Keep your purchase receipt as proof of purchase.

For further assistance, you may contact LEFXMOPHY customer service through the retailer's support channels.