1. Introduction
Thank you for choosing the HUTT DDC56 Window Cleaning Robot. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your device. Please read this manual thoroughly before first use and keep it for future reference.
2. Product Overview
The HUTT DDC56 is an intelligent window cleaning robot designed to provide efficient and streak-free cleaning for various glass surfaces.
2.1. Components
- HUTT DDC56 Window Cleaning Robot
- Remote Control
- Power Adapter
- Safety Rope
- Cleaning Cloths (6 MOPs included)
- Water Bottle
- Instruction Guide
Figure 2.1: HUTT DDC56 Window Cleaning Robot and its remote control.
3. Safety Information
Always prioritize safety when operating the robot, especially when cleaning high or hard-to-reach windows.
- Always attach the safety rope to a secure anchor point before placing the robot on the window. The robot is equipped with a 5-meter reinforced nylon safety rope.
- Ensure the power cable is securely connected and not tangled.
- The robot has a built-in safety back-up battery (20-25 minutes life) that activates in case of power disconnection, allowing time to retrieve the device. It will emit sounds to alert you.
- Do not use the robot on cracked or damaged glass surfaces.
- Keep hands and loose clothing away from moving parts during operation.
- This appliance is not intended for use by persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
Figure 3.1: Multi-Safety System including safety rope and backup battery.
4. Setup
Follow these steps to prepare your HUTT DDC56 for cleaning:
- Put on a cloth: Attach a clean microfiber cleaning cloth to each of the robot's rotating pads.
- Spray water: Lightly spray water (or a suitable glass cleaning solution) onto the cleaning cloths, approximately 10 times per cloth.
- Add water to the water tank: Open the water tank cap and fill the 60ml smart water tank with clean water.
- Connect the safety rope: Securely attach the safety rope to the robot and then to a sturdy anchor point indoors.
- Connect the power supply: Plug the power adapter into the robot and then into a power outlet.
- Power on: Press and hold the power button on the robot for 3 seconds until it powers on and begins suction.
Figure 4.1: Step-by-step setup guide for the HUTT DDC56.
5. Operating Instructions
The HUTT DDC56 is designed for user-friendly operation with advanced cleaning technologies.
5.1. One-Click Easy Control
Once powered on and attached to the window, simply press the start button on the robot or the remote control to begin cleaning. The robot will automatically plan its cleaning path and return to its starting point when finished.
Figure 5.1: One-Click Easy Control for smart navigation.
5.2. Smart Adaptive Suction
The DDC56 features smart adaptive suction, automatically adjusting its suction power (2000-3000Pa) based on the surface and the level of dirt detected. This ensures optimal cleaning for various types of stains, from rain to oil.
Figure 5.2: Smart Adaptive Suction for deeper cleaning.
5.3. Dual Rotating Scrub Technology
Equipped with dynamic swing and dual rotating pads, the robot provides deep and consistent cleaning, ensuring strong cleanliness and efficient dust absorption.
Figure 5.3: Dual Rotating Scrub Technology and DDC56 Smart Navigation.
5.4. Dual Ultrasonic Misting Spray System
The robot features a 60ml smart water tank and dual ultrasonic nozzles that spray a fine mist for precision hydration, enabling bidirectional cleaning and a streak-free shine.
Figure 5.4: HUTT Dual Ultrasonic Misting Spray System.
5.5. Frameless Window & Mirror Cleaning
The DDC56 is capable of effortlessly cleaning frameless windows and mirrors thanks to its automatic edge detection technology.
Figure 5.5: Automatic Edge Detection for Frameless Glass.
6. Maintenance
Regular maintenance ensures the longevity and optimal performance of your robot.
- Cleaning Cloths: After each use, remove the cleaning cloths and wash them. They are reusable and can be machine washed. Ensure they are completely dry before reattaching.
- Water Tank: Empty any remaining water from the tank after use. Clean the tank periodically to prevent mineral buildup.
- Sensors: Gently wipe the robot's sensors with a soft, dry cloth to ensure accurate edge detection and navigation.
- Storage: Store the robot in a cool, dry place away from direct sunlight when not in use.
7. Troubleshooting
If you encounter issues with your HUTT DDC56, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Robot does not power on. | No power connection or low battery. | Ensure power adapter is securely plugged in. Check if the power outlet is working. Allow the internal battery to charge if it's depleted. |
| Robot falls off the window. | Safety rope not attached, insufficient suction, or power loss. | Always attach the safety rope. Ensure the cleaning surface is clean and dry. Check power connection. The backup battery should prevent immediate fall upon power loss. |
| Leaves streaks or dirty marks. | Dirty cleaning cloths, insufficient water, or heavily soiled window. | Replace or wash cleaning cloths. Ensure water tank is filled and spray nozzles are clear. For heavily soiled windows, pre-clean or run multiple cycles with fresh cloths. |
| Robot does not move or gets stuck. | Obstruction, dirty sensors, or uneven surface. | Remove any obstructions. Clean the robot's sensors. Ensure the surface is flat and suitable for the robot. |
| Remote control not working. | Dead batteries or out of range. | Replace batteries in the remote control. Ensure you are within operating range of the robot. |
8. Specifications
| Feature | Detail |
|---|---|
| Brand | HUTT |
| Model Name | DDC56 |
| Special Feature | Precision Laser Mapping & Navigation |
| Color | White |
| Product Dimensions | 33"L x 15"W x 7"H |
| Included Components | Instruction Guide |
| Filter Type | Cloth |
| Battery Life (Backup) | 20 minutes |
| Water Tank Capacity | 60 Milliliters |
| Batteries Included | Yes (1 12V battery) |
| UPC | 190186021170 |
| Item Weight | 4.4 pounds |
| Manufacturer | HUTT |
| ASIN | B0DSBDDDPJ |
| Date First Available | March 24, 2025 |
9. Warranty and Support
For detailed warranty information, please refer to the warranty card included with your product packaging or visit the official HUTT website. For technical support or service inquiries, please contact HUTT customer service through the contact information provided on the product packaging or their official website.
