Introduction
Welcome to the user manual for your new Runstar Upper Arm Blood Pressure Monitor. This device is designed to provide accurate and reliable blood pressure and pulse rate measurements for home use. It features a wide-range cuff, a large LCD display with voice broadcast, and memory for two users. Please read this manual thoroughly before using the device to ensure proper operation and to maintain its accuracy and longevity.
Key features include high precision measurements within 30 seconds, automatic detection of irregular heartbeats, an ergonomically designed 4.2-inch LCD display with soft backlighting and large fonts, voice broadcast (optional), a universal comfort cuff (8.6" - 16.5"), cuff detection, and support for two users with 99 reading memories each.
Important Safety Information
This blood pressure monitor is intended for home use to measure blood pressure and pulse rate. It is not intended to be a substitute for professional medical advice, diagnosis, or treatment. Always consult with a healthcare professional for any health concerns or before making any medical decisions.
Legal Disclaimer: Statements regarding dietary supplements have not been evaluated by the FDA and are not intended to diagnose, treat, cure, or prevent any disease or health condition.
- Do not use this device on infants, children, or individuals who cannot express their consent.
- Do not use this device if you have a serious medical condition or are undergoing medical treatment without consulting your doctor.
- Avoid taking measurements in a moving vehicle or during physical activity.
- Keep the device away from strong electromagnetic fields.
- Do not disassemble or attempt to repair the device yourself.
Product Overview
Components
- 1x Runstar Arm Blood Pressure Monitor
- 1x Cuff (8.6'' - 16.5'')
- 1x USB-C Cable
- 4x AA batteries
Device Layout and Display
The Runstar blood pressure monitor features a large digital display and comes with a comfortable arm cuff.
The clear LCD display shows systolic (SYS), diastolic (DIA), and pulse (PUL) readings. The SET button allows for configuration, and the START/STOP button initiates or ends a measurement.
The monitor's 4.2-inch LCD screen is angled at 30 degrees for easy viewing, with soft backlighting and large fonts for clear readability. It also includes icons for cuff detection, irregular heartbeat detection, and battery status.
Setup
Powering the Device
Your Runstar Blood Pressure Monitor can be powered by either AA batteries or a USB-C cable.
The monitor can be powered by four AA batteries or via a USB-C cable for continuous use.
- Battery Installation: Open the battery compartment on the back of the monitor. Insert the 4 included AA batteries, ensuring correct polarity (+/-). Close the compartment securely.
- USB-C Power: Connect the provided USB-C cable to the monitor's USB-C port and plug the other end into a compatible USB power adapter (not included) or a computer USB port.
Cuff Placement
Proper cuff placement is crucial for accurate readings.
Ensure the cuff is placed correctly on the upper arm, approximately 2-3 cm above the elbow, with the air tube facing downwards.
- Sit in a chair with your back supported and feet flat on the floor. Relax for at least 5 minutes before measurement.
- Slide your arm through the cuff loop. The bottom edge of the cuff should be about 2-3 cm (0.8-1.2 inches) above your elbow.
- Position the air tube off-center toward the inner side of your arm, aligning it with your middle finger.
- Wrap the cuff snugly around your upper arm. Ensure it is not too tight or too loose. The cuff detection feature will alert you if it's not worn correctly.
- Rest your arm on a table so the cuff is at the same level as your heart.
Operating Instructions
Taking a Measurement
Follow these steps for an accurate blood pressure reading:
- Ensure the cuff is correctly placed and you are in a relaxed, seated position.
- Press the START/STOP button. The cuff will begin to inflate automatically.
- Remain still and do not talk or move during the measurement process.
- Once the measurement is complete, the cuff will deflate, and your systolic, diastolic, and pulse readings will be displayed on the screen.
- The device will automatically store the reading in the selected user's memory.
Press the 'START/STOP' button to begin the measurement. The cuff will inflate automatically.
The large, backlit LCD display provides clear readings, and the voice broadcast feature can announce results, which is particularly helpful for users with limited vision.
Note: The voice broadcast feature can be turned on or off using the SET button settings.
Memory Functions
The Runstar Blood Pressure Monitor supports two users and stores up to 99 measurement readings with date and time for each user.
The monitor supports two users, each capable of storing up to 99 measurement readings with date and time, allowing for easy tracking of health status.
Viewing Stored Readings
- With the device off, press the SET button to enter memory mode.
- Press the SET button again to switch between User 1 and User 2 memory.
- Use the memory button (often indicated by an 'M' or a scroll icon) to scroll through previous readings.
- Each reading will display the systolic, diastolic, pulse, and the date/time of the measurement.
Maintenance and Care
- Cleaning: Wipe the monitor and cuff with a soft, dry cloth. If necessary, use a slightly damp cloth with mild soap, then wipe dry. Do not use abrasive cleaners or immerse the device in water.
- Storage: Store the device in a clean, dry place, away from direct sunlight, extreme temperatures, and humidity. Keep it in the provided storage bag when not in use.
- Battery Replacement: Replace all four AA batteries when the low battery indicator appears on the display. Remove batteries if the device will not be used for an extended period.
- Cuff Care: The cuff is designed for durability. Avoid sharp objects or excessive pulling that could damage the air tube or fabric.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No display when powered on. | Batteries are dead or incorrectly inserted. / USB-C cable not connected properly. | Replace batteries with new ones, ensuring correct polarity. / Check USB-C connection. |
| "Error" message on display. | Cuff not applied correctly. / Movement or talking during measurement. / Irregular heartbeat detected. | Re-apply cuff snugly. / Remain still and quiet. / Consult a doctor if irregular heartbeat persists. |
| Inaccurate readings. | Improper cuff placement. / Arm not at heart level. / Not relaxed before measurement. | Ensure cuff is correctly placed and snug. / Position arm at heart level. / Rest for 5 minutes before measuring. |
| Voice broadcast not working. | Voice feature is turned off in settings. | Press the SET button to access settings and enable voice broadcast. |
Specifications
- Model Name: BP-205
- Product Dimensions: 3.94"L x 3.15"W x 5.31"Th
- Item Weight: 10.24 ounces
- Cuff Range: 8.6'' - 16.5'' (22-42 cm)
- Display Type: LCD (4.2-inch)
- Power Source: 4x AA batteries (included) or USB-C (cable included)
- Memory: 2 users x 99 readings each
- Measurement Range: Blood Pressure: 0-299 mmHg; Pulse: 40-199 beats/min
- Accuracy: Pressure: ±3 mmHg; Pulse: ±5% of reading
- Automatic Shut-off: After 60 seconds of inactivity
Warranty and Support
Runstar products are manufactured with high-quality standards. For information regarding warranty coverage and customer support, please refer to the warranty card included with your product or visit the official Runstar website.
For technical assistance or inquiries, please contact Runstar customer service. (Specific contact details are not provided in this manual.)
