1. Introduction
This manual provides essential information for the installation, operation, and maintenance of your ASUS TUF Gaming GeForce RTX 5070 12GB GDDR7 OC Edition Graphics Card. Designed for durability and high performance, this graphics card leverages the NVIDIA Blackwell architecture and DLSS 4 to deliver an exceptional computing experience.
Figure 1.1: ASUS TUF Gaming GeForce RTX 5070 Graphics Card and Packaging
For an overview of the product, please watch the official video below:
Video 1.1: Official ASUS TUF-RTX5070-O12G-GAMING Overview
2. What's in the Box
Verify that all items are present in the package:
- TUF-RTX5070-O12G-GAMING Graphics Card
- Speedsetup Manual
- TUF Graphics Card Holder
- TUF Velcro Hook & Loop
- TUF Magnet
Figure 2.1: Contents of the ASUS TUF Gaming Graphics Card Box
3. Setup and Installation
Follow these steps to properly install your graphics card:
- Prepare Your System: Ensure your computer is powered off and unplugged. Open your PC case.
- Locate PCIe Slot: Identify an available PCI Express 5.0 x16 slot on your motherboard.
- Remove Slot Covers: Remove the necessary expansion slot covers from your PC case. This card typically requires 3.125 slots.
- Insert Graphics Card: Carefully align the graphics card with the PCIe slot and press down firmly until it is securely seated. Ensure the retention clip locks into place.
- Secure the Card: Use screws to secure the graphics card to the PC case's expansion slot bracket.
- Connect Power Cables: Connect the appropriate power cables from your power supply unit (PSU) to the graphics card. This model requires a 12VHPWR connector. Ensure a secure connection to prevent power issues.
- Install Graphics Card Holder: Utilize the included TUF Graphics Card Holder to prevent GPU sag, especially for larger cards. Refer to the Speedsetup Manual for detailed instructions on installing the holder.
- Close Case and Connect Display: Close your PC case, plug in your power cable, and connect your display cable(s) to the graphics card's DisplayPort or HDMI outputs.
- Install Drivers: Power on your computer. Once the operating system loads, install the latest NVIDIA drivers from the official NVIDIA website for optimal performance.
Figure 3.1: Front View of the Graphics Card
Figure 3.2: Top View of the Graphics Card
4. Key Features
The ASUS TUF Gaming GeForce RTX 5070 OC Edition is engineered with advanced features for superior performance and durability:
- NVIDIA Blackwell Architecture & DLSS 4: Experience cutting-edge graphics and AI-powered performance with the latest NVIDIA technologies.
- Military-Grade Components: Built with TUF Chokes & MOSFETs and TUF 5K black metallic capacitors for rock-solid power delivery and extended lifespan.
- Protective PCB Coating: A specialized coating safeguards against moisture, dust, and debris, preventing short circuits.
- Advanced Cooling System: Features a 3.125-slot design with a massive fin array, three Axial-tech fans with dual ball bearings for enhanced airflow and quiet operation, and ASUS MaxContact technology for improved heat transfer.
- Phase-Change GPU Thermal Pad: This innovative thermal pad melts to fill microscopic gaps, providing superior thermal conductivity and longevity compared to traditional thermal paste.
- ASUS GPU Guard & Bracket: Reinforcements secure the GPU, reducing the risk of physical damage and ensuring stable mounting.
- Auto-Extreme Technology: An automated manufacturing process enhances reliability and consistency of components.
Figure 4.1: Military-Grade Components
Figure 4.2: Ultimate Durability Features
Figure 4.3: Cooling Mastery
Figure 4.4: Recommended PSU Pairing
Figure 4.5: Graphics Card Backplate
5. Operating Your Graphics Card
Once installed and drivers are updated, your graphics card is ready for use. For advanced control and monitoring, utilize the ASUS GPU Tweak III software.
- GPU Tweak III: This software provides intuitive performance tweaking, advanced thermal controls, and system monitoring. You can adjust clock speeds, fan curves, and voltage to optimize performance or reduce noise.
- Operating Modes: The card may feature dual BIOS settings, allowing you to switch between a Performance mode (P Mode) for maximum clock speeds and a Quiet mode (Q Mode) for reduced fan noise. Refer to the software or physical switch on the card for mode selection.
- Display Connectivity: The card supports multiple displays via its DisplayPort 2.1a and HDMI 2.1b outputs. Ensure your monitor cables are securely connected for optimal signal quality.
Figure 5.1: GPU Tweak III Software Interface
6. Maintenance
Regular maintenance helps ensure the longevity and optimal performance of your graphics card:
- Dust Removal: Periodically clean dust from the fans and heatsink using compressed air. Ensure the fans are not spinning during cleaning to prevent damage.
- Driver Updates: Keep your graphics drivers updated to the latest version available from the NVIDIA website. This ensures compatibility, performance improvements, and bug fixes.
- Temperature Monitoring: Use GPU Tweak III or other monitoring software to keep an eye on your card's temperatures, especially during heavy loads. Ensure adequate airflow within your PC case.
7. Troubleshooting
If you encounter issues, try the following troubleshooting steps:
- No Display:
- Ensure the display cable is securely connected to both the graphics card and the monitor.
- Verify the graphics card is fully seated in the PCIe slot and secured.
- Check that all power cables are correctly connected to the graphics card.
- Test with a different display cable or monitor if possible.
- Driver Issues:
- Perform a clean installation of the latest graphics drivers. Uninstall existing drivers using Display Driver Uninstaller (DDU) in Safe Mode before installing new ones.
- Overheating:
- Ensure proper airflow within your PC case. Clean any dust buildup on the graphics card fans and heatsink.
- Verify that case fans are functioning correctly and configured for optimal cooling.
- Consider adjusting fan curves in GPU Tweak III for more aggressive cooling.
- Performance Issues:
- Ensure your system meets the minimum requirements for the applications or games you are running.
- Check for background applications consuming system resources.
- Verify that the graphics card is operating in Performance mode if applicable.
8. Specifications
Key technical specifications for the ASUS TUF Gaming GeForce RTX 5070 OC Edition Graphics Card:
| Feature | Specification |
|---|---|
| Graphics Coprocessor | NVIDIA GeForce RTX 5070 |
| Graphics Card Ram Size | 12 GB GDDR7 |
| Memory Speed | 4000 MHz |
| GPU Clock Speed | 2610 MHz (OC Mode) |
| Max Screen Resolution | 7680x4320 Pixels |
| Video Output Interface | 3x DisplayPort 2.1a, 2x HDMI 2.1b |
| Bus Interface | PCIe 5.0 x16 |
| Item Weight | 3.4 pounds |
| Product Dimensions | 13 x 5.5 x 0.1 inches |
| Color | BLACK |
Figure 8.1: Graphics Card Output Ports
9. Warranty and Support
Your ASUS TUF Gaming GeForce RTX 5070 OC Edition Graphics Card comes with a manufacturer's warranty. Please refer to the warranty card included in your product packaging for specific terms and conditions.
For technical support, driver downloads, and further product information, please visit the official ASUS support website:
