Kingsteam Professional Facial Steamer with Ozone User Manual

1. Introduction

This manual provides detailed instructions for the safe and effective operation, maintenance, and troubleshooting of your Kingsteam Professional Facial Steamer with Ozone. This device is designed for both professional salon and personal home use, utilizing ionic steam to cleanse, hydrate, and revitalize skin.

Image: Kingsteam Professional Facial Steamer in a spa setting, demonstrating its use for skin care.

2. Safety Information

Please read all safety instructions carefully before using the facial steamer to prevent injury or damage to the device.

• Avoid direct contact with hot steam to prevent burns and scalding.
• Keep the steamer out of reach of children and pets.
• Always allow the steamer to cool down completely before handling, cleaning, or refilling the water tank.
• Use only distilled or purified water in the water tank. Tap water may contain minerals that can cause mineral buildup and affect performance.
• Do not immerse the main unit in water or any other liquid.
• Ensure the power cord is not damaged and is properly plugged into a grounded electrical outlet.
• Unplug the device when not in use, during cleaning, or before moving it.
• Do not operate the steamer if it has a damaged cord or plug, or if it is not functioning correctly.

3. Package Contents

Verify that all components are present in the package:

• Main Steamer Unit
• Adjustable Stand Pole
• Five-Star Base with Wheels
• Water Cup (650ml capacity)
• Spray Arm/Nozzle
• Power Cord
• User Manual (this document)

4. Setup Instructions

1. Assemble the Base: Attach the five-star base to the bottom of the adjustable stand pole. Ensure the wheels are securely inserted into the base.
2. Attach the Main Unit: Securely place the main steamer unit onto the top of the adjustable stand pole.
3. Install the Spray Arm: Insert the spray arm into the designated slot on the main steamer unit. Ensure it clicks into place or is firmly secured.
4. Fill the Water Cup:
   • Remove the water cup from the bottom of the main unit.
   • Fill the water cup with distilled or purified water up to the "MAX" line. Do not overfill.
   • Reinsert the water cup firmly into its position on the main unit.
5. Connect Power: Plug the power cord into the steamer and then into a suitable electrical outlet.

Image: Detailed view of the aromatherapy inlet, essence cotton, and the water cup with water level indicators.

5. Operating Instructions

1. Power On: Press the power button on the control panel. The steamer will begin to heat the water.
2. Adjust Height and Angle: Adjust the height of the stand pole and rotate the spray arm (360° rotation) to position the steam comfortably towards the face or desired area. Maintain a safe distance (at least 8-10 inches) from the nozzle to avoid burns.
3. Activate Ozone Function: If desired, press the "Ozone" button on the control panel. The ozone function enhances atomization and can assist in skin purification. It is recommended for 5-10 minute sessions.
4. Set Timer: Use the timer buttons on the control panel to set the desired steaming duration, up to 30 minutes. The LED display will show the remaining time. The device will automatically shut off when the timer expires or if the water level is too low.
5. Aromatherapy (Optional): To use aromatherapy, add a few drops of essential oil onto the essence cotton pad located in the designated inlet on the spray arm. Do not add essential oils directly into the water tank.
6. Enjoy Steaming: Relax and allow the ionic nano hot mist to cleanse and hydrate your skin.
7. Power Off: After your session, press the power button to turn off the steamer. Unplug the device from the electrical outlet.

Image: Close-up of the steamer's control panel, highlighting the 30-minute timer and ozone function buttons.

Image: User demonstrating the facial steamer in use, highlighting the fine mist and its benefits for skin hydration.

6. Maintenance

Regular cleaning and maintenance will ensure the longevity and optimal performance of your steamer.

• Cleaning the Water Cup: After each use, allow the steamer to cool down. Remove the water cup and empty any remaining water. Rinse the cup with clean water. For mineral buildup, use a mild descaling solution (e.g., white vinegar diluted with water) and rinse thoroughly.
• Cleaning the Main Unit: Wipe the exterior of the main unit with a soft, damp cloth. Do not use abrasive cleaners or immerse the unit in water.
• Storage: Store the steamer in a cool, dry place when not in use.
• Essence Cotton Replacement: Replace the essence cotton pad in the aromatherapy inlet regularly, especially if using different essential oils.

7. Troubleshooting

8. Specifications

• Model Name: Kingsteam Professional Facial Steamer
• Brand: Kingsteam
• Product Dimensions (L x W x H): 17.52 x 11.81 x 31.49 inches
• Weight: 15.4 Pounds
• Water Tank Capacity: 650 ML
• Material: Acrylonitrile Butadiene Styrene (ABS)
• Features: Ionic Nano Hot Mist, Ozone Function, 30-Minute Timer, LED Display, Detachable Water Cup, Height-Adjustable Stand, 360° Rotating Nozzle, Wheeled Base

Image: Product dimensions and adjustable height range of the facial steamer.

9. Warranty and Support

For warranty information, product support, or assistance with any issues not covered in this manual, please contact Kingsteam customer service. Refer to your purchase documentation for specific warranty terms and contact details.

You may also visit the official Kingsteam store on Amazon for additional product information and support resources: Kingsteam Amazon Store