Introduction
Thank you for choosing the Falebare Q20 Active Noise Cancelling Headphones. These headphones are designed to provide a superior audio experience with advanced noise cancellation, long battery life, and comfortable wear. This manual will guide you through the setup, operation, and maintenance of your new headphones to ensure optimal performance.
Package Contents
Please check the package for the following items:
- Falebare Q20 Active Noise Cancelling Headphones
- USB-C Charging Cable
- 3.5mm Audio Cable
- Protective Case
- User Manual
Image: Falebare Q20 Headphones and Included Accessories. This image displays the headphones, a charging cable, an audio cable, and a protective pouch.
Product Overview and Controls
Familiarize yourself with the headphone components and control buttons.
Image: Falebare Q20 Product Controls Diagram. This diagram labels the ANC on/off switch, Volume - button, Volume + button, Power Button, Type-C Charging Port, 3.5mm Audio Port, and Microphone.
- ANC Switch: Toggles Active Noise Cancellation on/off.
- Volume - Button: Decrease volume; long press for previous track.
- Volume + Button: Increase volume; long press for next track.
- Power Button: Power on/off; play/pause; answer/end calls; activate voice assistant.
- Type-C Charging Port: For charging the headphones.
- 3.5mm Audio Port: For wired connection.
- Microphone: For calls and voice commands.
Setup
1. Charging the Headphones
Before first use, fully charge your headphones. Connect the provided USB-C charging cable to the Type-C charging port on the headphones and the other end to a USB power source (e.g., wall adapter, computer USB port). The LED indicator will show charging status and turn off or change color when fully charged. A full charge provides up to 120 hours of playback time.
2. Powering On/Off
- Power On: Press and hold the Power Button for approximately 3 seconds until the LED indicator lights up.
- Power Off: Press and hold the Power Button for approximately 3 seconds until the LED indicator turns off.
3. Bluetooth Pairing
The Falebare Q20 headphones use Bluetooth 5.3 for stable connectivity.
- Ensure the headphones are powered off.
- Press and hold the Power Button for 5-7 seconds until the LED indicator flashes blue and red alternately, indicating pairing mode.
- On your device (smartphone, tablet, laptop), enable Bluetooth and search for available devices.
- Select "Q20" from the list of devices.
- Once connected, the LED indicator will flash blue slowly or remain solid blue.
The headphones will automatically attempt to reconnect to the last paired device when powered on.
Image: Falebare Q20 Headphones with 120 Hours Playtime. This image highlights the extended battery life of the headphones.
Operating Instructions
Active Noise Cancellation (ANC)
The Falebare Q20 features active noise cancellation technology to reduce ambient noise.
- To activate ANC, slide the ANC Switch to the 'ON' position. The ANC indicator light will illuminate.
- To deactivate ANC, slide the ANC Switch to the 'OFF' position. The ANC indicator light will turn off.
Image: Active Noise Cancellation in Falebare Q20 Headphones. This visual represents the noise-cancelling effect around the headphones.
Music Playback
- Play/Pause: Press the Power Button once.
- Volume Up: Press the Volume + Button once.
- Volume Down: Press the Volume - Button once.
- Next Track: Long press the Volume + Button.
- Previous Track: Long press the Volume - Button.
Phone Calls
- Answer/End Call: Press the Power Button once.
- Reject Call: Long press the Power Button for 2 seconds.
- Activate Voice Assistant: Double-press the Power Button.
Wired Mode
You can use the headphones with the included 3.5mm audio cable for a wired connection, even if the battery is depleted. Simply plug one end into the 3.5mm audio port on the headphones and the other end into your audio device's 3.5mm jack.
Image: 40mm Dynamic Driver for Deep Bass in Falebare Q20. This image illustrates the internal 40mm driver responsible for audio quality.
Maintenance
- Cleaning: Use a soft, dry cloth to clean the headphones. Do not use abrasive cleaners or solvents.
- Storage: When not in use, store the headphones in the provided protective case to prevent damage. Avoid exposing them to extreme temperatures, humidity, or direct sunlight.
- Battery Care: To prolong battery life, avoid fully discharging the headphones frequently. Charge them regularly, even if not in constant use.
Image: Memory Foam Ear Cushions and Foldable Design for Comfort. This image shows the soft ear cushions and highlights the foldable design for portability.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Headphones do not power on. | Low battery. | Charge the headphones fully. |
| Cannot pair via Bluetooth. | Headphones not in pairing mode; device Bluetooth off; too far from device. | Ensure headphones are in pairing mode (flashing blue/red). Turn on Bluetooth on your device. Move headphones closer to the device (within 40 feet). |
| No sound or poor sound quality. | Volume too low; incorrect audio source; loose wired connection. | Increase volume on headphones and device. Check audio source settings. Ensure 3.5mm cable is securely connected. |
| ANC not working effectively. | ANC switch off; environmental noise too high. | Ensure ANC switch is 'ON'. ANC is most effective against low-frequency constant noise. |
| Audio delay during video playback. | Bluetooth interference; device compatibility. | Try disconnecting and reconnecting Bluetooth. Test with another device. Use wired connection if delay persists. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | Q20-Falebare |
| Brand | Falebare |
| Colour | Black |
| Ear Placement | Over Ear |
| Form Factor | Over Ear |
| Impedance | 1 Ohms |
| Noise Control | Active Noise Cancellation |
| Audio Driver Type | Dynamic Driver |
| Audio Driver Size | 40 Millimeters |
| Frequency Range | 20 Hz - 20,000 Hz |
| Enclosure Material | Leather, Plastic |
| Connectivity Technology | Bluetooth 5.3, Wired, Wireless |
| Bluetooth Range | 40 Feet |
| Battery Average Life | 120 Hours |
| Charging Port | Type-C |
| Headphone Jack | 3.5 mm Jack |
| Control Type | Button Control |
| Compatible Devices | Cellphones, Desktops, Laptops, Telephones, Television |
| Parcel Dimensions | 18.2 x 16.4 x 6.2 cm; 330 g |
Warranty and Support
The Falebare Q20 Active Noise Cancelling Headphones come with a 1 Year Manufacturer Warranty.
For warranty claims, technical support, or any questions regarding your product, please contact Falebare customer service through the retailer where you purchased the product or visit the official Falebare website for contact information.
