Introduction
This manual provides comprehensive instructions for the installation, operation, and maintenance of your SPTBMDJ Electric Scooter Display. Please read this manual carefully before use to ensure proper function and longevity of the product. This display is designed for electric scooters utilizing a 36V-72V controller and features a 6-pin male connector for seamless integration.
Safety Information
- Always ensure the scooter's power is off before attempting installation or maintenance.
- Do not expose the display to extreme temperatures, direct sunlight for prolonged periods, or excessive moisture.
- Avoid using abrasive cleaners or solvents on the display screen.
- If you are unsure about any installation steps, consult a qualified technician.
- Ensure all connections are secure to prevent electrical issues.
Product Overview
The SPTBMDJ Electric Scooter Display provides essential information for your ride, including speed, battery level, and various operational modes. It features a clear LCD screen and intuitive button controls for easy access to functions.
Figure 1: Front view of the SPTBMDJ Electric Scooter Display, showing the LCD screen, power button, and mode button.
Figure 2: Multiple views of the display, including front, side profile, and a close-up of the 6-pin male connector.
Specifications
| Feature | Detail |
|---|---|
| Material | Plastic |
| Color | Black |
| Weight | Approximately 1.76 ounces (50g) |
| Dimensions (L x H) | Approximately 12.5 cm x 11 cm |
| Handlebar Clamp Diameter | Approximately 2.3 cm |
| Connector Type | 6-Pin Male Connector |
| Compatibility | LIVIAE Electric Scooter Controller (36V-72V) |
| Model Number | SPTBMDJ124 |
Figure 3: Display dimensions: approximately 12.5 cm (length) x 11 cm (height) with a handlebar clamp width of 3.5 cm and clamp diameter of 2.3 cm.
Setup and Installation
- Power Off Scooter: Ensure your electric scooter is completely powered off before beginning installation.
- Mount the Display: Securely attach the display unit to your scooter's handlebar using the integrated clamp. Ensure it is positioned for optimal visibility and accessibility.
- Locate Controller Connector: Identify the corresponding 6-pin female connector on your scooter's controller wiring harness.
- Connect the Display: Carefully align the 6-pin male connector from the display with the female connector on the controller. Push firmly until a secure connection is made.
- Cable Management: Route the display cable neatly and secure it with cable ties (not included) to prevent interference with moving parts or accidental disconnections.
- Test Functionality: Once connected, power on your scooter and verify that the display illuminates and shows information correctly.
Figure 4: Close-up view of the 6-pin male connector, which connects the display to the scooter's controller.
Operating Instructions
- Power On/Off: Press and hold the Power Button (usually marked with a power symbol) for a few seconds to turn the display on or off.
- Mode Selection: Press the Mode Button (usually marked with 'M') to cycle through different display modes, such as speed, odometer, trip distance, and battery voltage.
- Information Displayed: The LCD screen typically shows:
- Current Speed
- Battery Level Indicator
- Riding Mode (e.g., Eco, Normal, Sport) - if supported by your scooter's controller
- Odometer / Trip Distance
- Voltage (V)
- Adjusting Settings: Some displays allow for advanced settings adjustments (e.g., wheel size, voltage limits) by pressing and holding both the Power and Mode buttons simultaneously. Refer to your scooter's main controller manual for specific advanced setting procedures, as this display acts as an interface.
Maintenance
- Cleaning: Use a soft, damp cloth to gently wipe the display screen and housing. Do not use harsh chemicals, abrasive materials, or excessive water.
- Connection Check: Periodically inspect the 6-pin connector and cable for any signs of wear, damage, or loose connections.
- Storage: When not in use for extended periods, store the scooter and display in a cool, dry place away from direct sunlight.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Display does not turn on. | No power from scooter; loose connection; faulty display. | Ensure scooter is powered on. Check 6-pin connector for secure fit. Verify scooter battery is charged. If problem persists, contact support. |
| Incorrect speed or distance readings. | Incorrect wheel size setting (if adjustable); sensor issue. | Consult your scooter's controller manual for instructions on adjusting wheel size settings. Check speed sensor connection. |
| Display flickers or shows erratic data. | Loose connection; electrical interference; internal fault. | Check all connections for tightness. Ensure cables are not damaged. Avoid operating near strong electromagnetic fields. |
Warranty and Support
This product is covered by the manufacturer's standard warranty. For warranty claims, technical support, or further assistance, please contact your retailer or the manufacturer directly. Please have your model number (SPTBMDJ124) and purchase information ready when contacting support.
Manufacturer: SPTBMDJ