HUOKU Modern LED Wooden Chandelier Instruction Manual
Model: 146ec651-ee3f-41ac-94fd-49eb2818e354
Introduction
Thank you for choosing the HUOKU Modern LED Wooden Chandelier. This manual provides detailed instructions for the safe installation, operation, and maintenance of your new lighting fixture. Please read this manual thoroughly before beginning installation and retain it for future reference.
This 24-inch dimmable, 1-ring round chandelier features a walnut color wood finish, combining farmhouse charm with modern design. It is suitable for various indoor spaces such as dining rooms, kitchens, entryways, foyers, and living rooms.
Safety Information
- WARNING: Risk of electric shock. Disconnect power at the circuit breaker or fuse box before installation or servicing.
- All electrical connections must be in accordance with local codes, ordinances, or the National Electric Code (NEC). Consult a qualified electrician if you are unfamiliar with proper electrical wiring connections.
- Do not install this fixture in wet locations. This product is designed for indoor use only.
- Ensure the mounting surface can support the weight of the fixture.
- Do not connect this fixture to an ungrounded electrical system.
- Handle the fixture with care. Do not bend or pull wires during installation.
Package Contents
Verify that all parts are present before beginning installation. If any part is missing or damaged, do not attempt to assemble or install the product. Contact customer service for assistance.
- LED Chandelier Fixture (1)
- Mounting Bracket (1)
- Canopy (1)
- Adjustable Hanging Cables (3)
- Wire Nuts (3)
- Mounting Screws and Anchors (Set)
- Instruction Manual (1)
Setup & Installation
Estimated Installation Time: 30-60 minutes
Tools Required: Screwdriver, Wire Strippers, Pliers, Electrical Tape, Ladder.
1. Prepare for Installation
- Turn off power at the main circuit breaker or fuse box.
- Carefully unpack the fixture and all components. Lay them out on a clean, flat surface.
2. Install Mounting Bracket
- Attach the mounting bracket to the junction box in your ceiling using the provided mounting screws. Ensure the bracket is securely fastened.
3. Adjust Hanging Cable Length
The chandelier features adjustable hanging cables to customize the height. To adjust, gently press the pin on the cable gripper located on the canopy and slide the cable to the desired length. Ensure all three cables are adjusted to the same length for a level fixture.
Figure 1: Chandelier dimensions and adjustable cable mechanism. The maximum height is 78.74 inches.
Figure 2: Illustration of pressing the cable gripper to adjust cable length. This image also shows key product specifications.
4. Wire Connections
- Connect the fixture's wires to the corresponding wires from the junction box using wire nuts:
- Connect the black wire from the fixture to the black (Live) wire from the junction box.
- Connect the white wire from the fixture to the white (Neutral) wire from the junction box.
- Connect the ground wire (bare copper or green) from the fixture to the ground wire from the junction box.
- Ensure all connections are secure and insulated with electrical tape if necessary.
5. Secure the Fixture
- Carefully tuck all wires into the junction box.
- Align the canopy with the mounting bracket and secure it with the provided screws.
6. Restore Power
- Once installation is complete, restore power at the circuit breaker.
Operating Instructions
Turning On/Off
Operate the chandelier using a standard wall switch connected to the fixture's circuit.
Dimmable Functionality
This LED chandelier is fully dimmable. To utilize the dimming feature, you must install a compatible LED dimmer switch (not included) on your wall. The fixture will respond to the dimmer switch to adjust light intensity.
Figure 3: The chandelier's dimmable feature, illustrating different light levels from off to a soft night light glow.
Maintenance
- Cleaning: To clean the fixture, ensure power is disconnected. Wipe with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these may damage the finish or electrical components.
- LEDs: The integrated LED light source is designed for long-term use and is not user-replaceable.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on | 1. Power is off. 2. Loose wire connections. 3. Faulty wall switch. | 1. Check circuit breaker/fuse. 2. Verify all wire connections are secure. 3. Test or replace wall switch. |
| Light flickers or dims incorrectly | 1. Incompatible dimmer switch. 2. Loose wire connections. | 1. Ensure a compatible LED dimmer switch is used. 2. Check wire connections. |
| Fixture is not level | Uneven cable adjustment. | Adjust the hanging cables to ensure equal length. Refer to 'Adjust Hanging Cable Length' section. |
Specifications
| Feature | Detail |
|---|---|
| Brand | HUOKU |
| Model Number | 146ec651-ee3f-41ac-94fd-49eb2818e354 |
| Product Dimensions | 23.62"L x 23.62"W x 2.76"H |
| Maximum Hanging Height | 78.7 inches |
| Material | Wood-Walnut, Metal, Acrylic |
| Color | Wood-Walnut Color |
| Light Source Type | Integrated LED |
| Wattage | 30 Watts |
| Light Color Temperature | 3000K (Warm White) |
| Input Voltage | 110V-220V |
| Dimmable | Yes (requires compatible dimmer switch) |
| Installation Type | Semi Flush Mount |
| Indoor/Outdoor Usage | Indoor |
| Item Weight | 8.73 pounds |
Warranty and Support
Specific warranty information for this product is not provided in the available data. For warranty details or technical support, please contact the manufacturer, HUOKU, directly through their official website or the retailer where the product was purchased.