Tribesigns Square Dining Table (Model JW0819-New) Instruction Manual

Introduction

This manual provides detailed instructions for the assembly, operation, maintenance, and troubleshooting of your Tribesigns Square Dining Table, Model JW0819-New. Please read this manual thoroughly before assembly and use to ensure proper function and longevity of your product.

Image: The Tribesigns Square Dining Table, Model JW0819-New, featuring a grey wood grain finish and a sturdy pedestal base, suitable for various interior styles.

Safety Information

• Always assemble the product on a soft, clean surface to prevent scratches.
• Ensure all screws and fasteners are securely tightened before use. Periodically check and re-tighten as needed.
• Do not overload the table. The maximum weight recommendation is 350 pounds.
• Keep small parts away from children during assembly to prevent choking hazards.
• Use caution when moving the table to avoid injury or damage. Lift, do not drag.

Parts and Hardware List

Before beginning assembly, verify that all parts and hardware are present and undamaged. Refer to the included assembly guide for detailed diagrams.

Parts List:

• Tabletop sections (2 pcs)
• Support bars (4 pcs)
• Pedestal base panels (5 pcs)

Hardware List:

• Cam bolts (Type A, 34 pcs)
• Cam locks (Type C, 34 pcs)
• M6x10mm Screws (Type N, 32 pcs)
• L-shaped Brackets (Type Z, 8 pcs)
• Installation Tool (1 pc)

Image: A close-up view highlighting the 3.93-inch thick tabletop, indicating robust construction.

Image: A detailed view of the 15.74-inch wide pedestal base, emphasizing its stability.

Setup and Assembly

Follow these steps carefully for proper assembly. An installation video is provided for visual guidance.

1. Assemble the Pedestal Base (Inner Structure):

   Identify the five pedestal base panels (labeled 4 and 5 in the assembly guide). Use cam bolts (A) and cam locks (C) to connect these panels, forming the inner rectangular structure of the pedestal. Ensure all connections are snug.
2. Assemble the Tabletop Frame:

   Take the four support bars (labeled 2 and 3). Attach them together using cam bolts (A) and cam locks (C) to create a rectangular frame. This frame will support the tabletop sections.

3. Attach Tabletop Frame to Pedestal Base:

   Carefully place the assembled tabletop frame onto the top of the pedestal base. Align the pre-drilled holes. Secure the frame to the pedestal using M6x10mm screws (N) and L-shaped brackets (Z). Ensure the pedestal is centered and stable.

4. Install Tabletop Sections:

   Place the two tabletop sections (labeled 1) onto the assembled frame. Align them carefully to form a seamless square surface. Secure the tabletop sections to the frame using the remaining cam bolts (A) and cam locks (C).
5. Final Tightening and Inspection:

   Using the provided installation tool, ensure all cam locks and screws are fully tightened. Check the table for stability and levelness. Adjust as necessary.

Operating Instructions

The Tribesigns Square Dining Table is designed for versatile use in dining rooms, living rooms, or kitchens. It comfortably accommodates up to 4 people.

• Placement: Position the table on a flat, stable surface. Avoid placing it in direct sunlight or near heat sources to prevent material damage.
• Weight Distribution: Distribute weight evenly across the tabletop. Avoid placing heavy objects on one side only.
• Movement: When moving the table, lift it from the base and tabletop simultaneously. Do not drag it, as this can damage the legs or floor.

Image: An overhead perspective of the square dining table, demonstrating its capacity to comfortably seat four individuals.

Maintenance

Proper care will help maintain the appearance and extend the life of your dining table.

• Cleaning: Wipe the table surface with a damp cloth for general cleaning. For spills, wipe immediately with a dry cloth. Avoid abrasive cleaners or harsh chemicals.
• Protection: Use placemats or coasters to protect the tabletop from hot dishes, spills, and scratches.
• Environmental Conditions: Maintain a stable indoor environment. Extreme changes in temperature and humidity can affect wood products.

Troubleshooting

If you encounter issues with your dining table, refer to the following common problems and solutions.

Issue: Table feels wobbly or unstable.

• Solution: Re-check all assembly connections. Ensure all cam bolts and cam locks are fully tightened. Sometimes, cam locks may not engage properly if the cam bolt is not inserted far enough or if the lock is not turned completely.
• Solution: Verify that the table is on a level surface. If your floor is uneven, consider using furniture pads or shims under the base to stabilize the table.

Issue: Screws do not tighten or feel loose.

• Solution: Ensure you are using the correct screws for each part as indicated in the assembly guide. Over-tightening can strip the wood, leading to loose connections. If a screw hole is stripped, you may need to use a wood filler or a slightly larger screw (with caution) to secure the connection.
• Solution: For cam lock connections, ensure the cam bolt is fully inserted into the receiving hole before turning the cam lock. The cam lock should turn smoothly and firmly to secure the connection. If it spins freely, the bolt may not be properly engaged.

Specifications

Image: A diagram illustrating the key dimensions of the dining table, including length, width, and height.

Warranty and Support

Tribesigns provides a 24-month warranty for this product. If you have any questions or require assistance before or after your purchase, please contact Tribesigns customer service.

For further support, visit the official Tribesigns store: Tribesigns Store