BN-LINK CP-U162R

Download PDF
Contents

BN-LINK Wireless Remote Control Outlet Plug Switch (Model CP-U162R) Instruction Manual

1. Introduction

The BN-LINK Wireless Remote Control Outlet Plug Switch provides convenient wireless control for your electrical appliances. This manual guides you through the setup, operation, and maintenance of your device, ensuring safe and efficient use.

2. Product Features

  • 2-in-1 Functionality: Functions as a wall switch when mounted on its magnetic plate base or as a portable remote control.
  • No Wiring Required: Easy installation without complex electrical wiring.
  • Pre-Programmed: Units are pre-paired from the factory for immediate use.
  • Extended RF Range: Operates up to 100 feet indoors, capable of transmitting through walls and doors.
  • Expandable System: Allows for additional remotes and outlets to be added and paired.
  • Compact Design: Small and lightweight, designed to avoid obstructing adjacent outlets.
  • Manual Control: Each outlet receiver includes a manual on/off button.
  • High Capacity: Rated for 125V, 15A, 1875W.

3. Package Contents

  • 1 x Remote Control Outlet Receiver
  • 1 x Wireless Remote Control Switch
  • 1 x CR2032 Coin Battery (pre-installed in remote, may require tab removal)
  • 2 x Mounting Screws
  • Adhesive Tape (pre-applied on the back of the magnetic plate base)

4. Specifications

SpecificationValue
Model NumberCP-U162R
Product Dimensions2 x 2 x 1 inches
Weight5.43 ounces
Operating Voltage125 Volts
Current Rating15 Amps
Maximum Wattage1875 Watts
Operation ModeON-OFF
RF RangeUp to 100 feet (indoors)
Remote Battery1 x CR2032 (included)
MaterialPlastic

5. Setup and Installation

  1. Install Remote Battery: Open the remote control's battery compartment and remove any protective tab from the pre-installed CR2032 battery. Ensure the battery is correctly seated.
  2. Plug in Receiver: Insert the remote control outlet receiver into a standard 125V wall outlet.
  3. Connect Appliance: Plug the appliance you wish to control into the remote control outlet receiver.
  4. Mount Remote (Optional): The remote control can be used portably or mounted.
    • Magnetic Mounting: The remote attaches magnetically to its wall plate base.
    • Screw Mounting: Secure the wall plate base to a desired location using the provided screws.
    • Adhesive Mounting: Use the adhesive tape on the back of the wall plate base to stick it to a clean, dry surface.
Diagram showing the simple installation steps for the BN-LINK remote control outlet, including battery insertion, mounting options, and connecting the remote to the wall plate.
Figure 1: Simple Installation Steps. This image illustrates the components for installation, including the CR2032 coin battery, mounting screws, and the adhesive tape on the back of the base. It also shows a three-step process for mounting the remote control: 1) attaching the magnetic plate to the wall, 2) placing the remote onto the magnetic plate, and 3) operating the remote.

6. Operating Instructions

Once installed, the remote control outlet is ready for use.

  • Remote Control: Press the 'ON' button on the remote to turn on the connected appliance. Press the 'OFF' button to turn it off.
  • Manual Control: Each remote control outlet receiver has a manual button. Press this button once to toggle the connected appliance ON or OFF.
A hand holding the BN-LINK remote control, pointing towards a wall outlet with the receiver plugged in, controlling Christmas lights and other room decor.
Figure 2: Plug and Play Operation. This image shows a hand holding the remote control, demonstrating its ease of use for wireless control of devices plugged into the outlet receiver, such as Christmas decorations.
An image illustrating the two modes of the BN-LINK remote control: Fixed Mode, where the remote is mounted on a wall plate, and Portable Mode, where the remote is held in hand.
Figure 3: Two Modes Available. This image displays the flexibility of the remote control, showing it used as a fixed wall switch and as a portable handheld remote.

7. Pairing and Programming

The units are pre-programmed for immediate use. If you need to re-pair a remote with an outlet or add new components, follow these steps:

  1. Plug the remote control outlet receiver into a wall outlet.
  2. Press and hold the small learning button on the side of the receiver until its indicator light begins to flash.
  3. While the indicator light is flashing, press the desired 'ON' or 'OFF' button on the remote control you wish to pair.
  4. The indicator light on the receiver will stop flashing, indicating successful pairing.

To clear all pairings from a receiver, press and hold the learning button for approximately 10 seconds until the indicator light flashes rapidly and then turns off.

8. Maintenance

  • Battery Replacement: When the remote control's range decreases or it becomes unresponsive, replace the CR2032 coin battery. Ensure correct polarity.
  • Cleaning: Wipe the devices with a dry, soft cloth. Do not use liquid cleaners or solvents.

9. Troubleshooting

  • Device not responding:
    • Check if the remote control battery needs replacement.
    • Ensure the remote control outlet receiver is securely plugged into a live wall outlet.
    • Verify the appliance connected to the receiver is properly plugged in and functional.
    • Confirm the remote control is within the 100ft operating range.
    • Re-pair the remote control and receiver as described in Section 7.
  • Interference: While designed to minimize interference, strong radio frequency signals from other devices might affect performance. Try relocating the remote or receiver if interference is suspected.
  • Limited Range: Obstacles like thick walls, metal structures, or other electronic devices can reduce the effective range.

10. Safety Information

  • For indoor use only. Do not expose to water or damp conditions.
  • Do not exceed the maximum load capacity of 15 Amps or 1875 Watts.
  • Do not disassemble or attempt to repair the device. Contact customer support for assistance.
  • Keep out of reach of children.
  • Ensure the appliance plugged into the receiver is suitable for remote control operation.

11. Warranty and Support

BN-LINK products are designed for reliability and performance. For warranty information or technical support, please contact BN-LINK customer service. Refer to the product packaging or the official BN-LINK website for contact details.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.