MATEMINCO X1PRO
MATEMINCO X1 Pro LEP Flashlight User Manual
Model: X1PRO
Product Overview
The MATEMINCO X1 Pro is a high-performance LEP (Laser Excited Phosphor) flashlight designed for long-range illumination, featuring additional AUX LED lighting. It is built with aerospace-grade aluminum alloy, ensuring durability and efficient heat dissipation. This portable torch is suitable for various outdoor activities including emergency situations, camping, and hunting.
Image: MATEMINCO X1 Pro LEP Flashlight in green, showcasing its compact and robust design.
Package Contents
Upon opening the package, please verify that all the following items are included:
- 1 x X1 Pro Flashlight
- 2 x O-rings (spare)
- 1 x Lanyard
- 1 x 18350 Short Tube
- 1 x Clip
- 1 x User Manual (this document)
Setup and Battery Installation
The X1 Pro flashlight operates using one 21700 or one 18350 battery (not included). A high-drain flat-top battery is recommended for optimal performance.
- Unscrew the Tail Cap: Gently unscrew the tail cap of the flashlight by turning it counter-clockwise.
- Insert Battery: Insert the recommended 21700 battery with the positive (+) terminal facing towards the head of the flashlight. If using an 18350 battery, first insert it into the provided 18350 short tube, then insert the tube with the battery into the flashlight, ensuring the positive (+) terminal faces the head.
- Secure Tail Cap: Screw the tail cap back on clockwise until it is fully tightened. Ensure a secure connection to prevent water ingress and ensure proper electrical contact.
- Attach Lanyard/Clip (Optional): Attach the included lanyard to the tail cap or the clip to the body for convenient carrying.
Operating Instructions
The X1 Pro features a versatile user interface with multiple modes, controlled by both the tail switch and the body side switch.
Main Light Operation (LEP)
- Turn On/Off: Press the tail switch fully to turn the main LEP light on or off.
- Mode Switching: While the main light is on, use the side switch to cycle through different brightness levels.
Image: The X1 Pro demonstrating its impressive 1350-meter long-range beam throw in an outdoor setting.
Auxiliary LED Operation (XBD LED)
The X1 Pro is equipped with 7 XBD LEDs, including white, red, and blue lights, for auxiliary illumination and warning signals.
- Activating AUX LEDs: Refer to the included physical manual for precise instructions on activating and cycling through AUX LED modes (white, red, blue, and warning lights).
- Warning Light Function: The red and blue XBD LEDs can function as warning lights, useful for signaling or emergency situations.
Image: Detailed view of the flashlight head, highlighting the central CT1 mini LEP emitter and the surrounding 7 XBD auxiliary LEDs, including red and blue options.
Image: The X1 Pro displaying its red and blue warning light capabilities, illuminating a scene with distinct colored beams.
Image: The X1 Pro illuminating an area with its 7 CREE XBD white auxiliary LEDs, providing broad area lighting.
Maintenance
Proper maintenance ensures the longevity and optimal performance of your X1 Pro flashlight.
- Cleaning: Use a soft, damp cloth to clean the flashlight body. Do not use abrasive cleaners or solvents. Clean the lens with a lens cleaning cloth.
- O-ring Lubrication: Periodically inspect the O-rings for wear and tear. Apply a thin layer of silicone grease to the O-rings to maintain their waterproof seal. Replace O-rings if they appear damaged or brittle.
- Battery Care: Remove the battery if the flashlight will not be used for an extended period to prevent battery drain or leakage. Store batteries in a cool, dry place.
- Thread Cleaning: Keep the threads of the tail cap and head clean. Dirt or debris can interfere with electrical contact and sealing.
Troubleshooting
If you encounter issues with your X1 Pro flashlight, please refer to the following common solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Flashlight does not turn on. |
|
|
| Light is dim or flickers. |
|
|
| Water ingress. |
|
|
If the problem persists after trying these solutions, please contact MATEMINCO customer support for further assistance.
Specifications
| Feature | Detail |
|---|---|
| Product Name | Mateminco X1 Pro |
| LED Configuration | 1 x CT1 mini LEP + 7 x XBD LED |
| Material | Aerospace Grade Aluminum Alloy (HardIII Anodized) |
| Switch Type | Clicky Switch (Tail and Body Side) |
| Battery Compatibility | 1 x 21700 or 1 x 18350 Battery (not included, high-drain flat-top recommended) |
| Max Output | 1350 lumens |
| Max Beam Intensity | 460,000 cd |
| Max Beam Distance | 1350 meters (4429 ft) |
| Impact Resistant | 1 meter (3.28 ft) |
| Waterproof Rating | IPX6 |
| Weight | 187g (6.6 oz) |
| Dimensions (L x Head D x Body D) | 151mm x 44.5mm x 28.5mm (5.94in x 1.75in x 1.12in) |
| Special Features | High Power, Long Range, Portable, Anti-slip knurling, Good heat dissipation ability, High-efficiency boosting constant current drive and direct drive driver. |
Warranty and Support
MATEMINCO products are manufactured to high standards. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official MATEMINCO website. Keep your purchase receipt as proof of purchase for warranty claims.
For technical support, troubleshooting assistance beyond this manual, or warranty inquiries, please contact MATEMINCO customer service. Contact information can typically be found on the product packaging or the official brand website.
Manufacturer: Dongguan Tongming Photoelectric Technology Co., Ltd
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.