Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your MiBOXER FUT107 6W GU10 Dual White LED Spotlight. Please read this manual thoroughly before use to ensure proper functionality and safety.
The FUT107 is a versatile LED spotlight designed to provide customizable warm and cool white lighting, utilizing 2.4GHz RF technology for remote control and integration into smart lighting systems.
Safety Information
- Ensure power is disconnected before installation or maintenance.
- Do not use in wet or damp environments unless specifically rated for such conditions.
- This product is designed for indoor use only.
- Do not disassemble or modify the product. This will void the warranty and may cause damage or injury.
- Keep out of reach of children.
- Operate within the specified voltage range (AC100-240V).
Product Overview
The MiBOXER FUT107 is a 6W GU10 LED spotlight featuring dual white (CCT) functionality and 2.4GHz RF wireless control.
Figure 1: Front view of the MiBOXER FUT107 GU10 LED Spotlight, showing the GU10 base and product labeling.
Figure 2: Multiple MiBOXER FUT107 spotlights, illustrating their compact design.
Figure 3: Technical drawing showing the dimensions of the FUT107 spotlight (50mm diameter, 72mm length) and its packaging.
Setup and Installation
The FUT107 spotlight features a standard GU10 base for easy installation into compatible fixtures.
- Power Off: Ensure the power supply to the fixture is completely turned off at the circuit breaker before beginning installation.
- Insert Bulb: Align the two pins of the GU10 base with the corresponding holes in the fixture socket.
- Twist to Secure: Gently push the bulb into the socket and twist clockwise until it is securely locked in place.
- Restore Power: Once the bulb is securely installed, restore power to the fixture.
Note: If replacing an existing bulb, allow the old bulb to cool down completely before removal.
Operating Instructions
The FUT107 spotlight can be controlled wirelessly using a 2.4GHz RF remote control (sold separately) or via a 2.4GHz gateway for smartphone app and third-party voice control.
Wireless Control Features
Figure 4: Visual representation of adjustable color temperature (warm to cool white) and brightness control with smooth transitions.
- Brightness Adjustment: Smoothly adjust the light intensity from 1% to 100% without flicker.
- Color Temperature Adjustment: Change the color temperature from 2700K (warm white) to 6500K (cool white) to suit your preference or mood.
- Control Distance: The 2.4GHz RF remote control has an effective range of up to 30 meters.
- Multi-Zone Synchronization: If using a compatible MiBOXER remote or gateway, multiple FUT107 spotlights can be grouped and controlled simultaneously.
Smart Home Integration (Requires 2.4GHz Gateway)
Figure 5: Illustration of how the FUT107 can be controlled via smartphone app and voice assistants like Amazon Alexa and Google Assistant when connected through a 2.4GHz gateway.
To enable smartphone app control and third-party voice control (e.g., Amazon Alexa, Google Assistant), a MiBOXER 2.4GHz gateway (sold separately) is required. Follow the gateway's instructions for pairing and setup.
Maintenance
- Cleaning: Disconnect power before cleaning. Use a soft, dry cloth to wipe the surface of the spotlight. Do not use abrasive cleaners or solvents.
- Bulb Replacement: The LED light source is designed for long life and is not user-replaceable. If the bulb fails, the entire unit should be replaced.
- Storage: If storing the product for an extended period, keep it in a cool, dry place away from direct sunlight and extreme temperatures.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power to the fixture. Bulb not properly installed. Bulb is faulty. | Check circuit breaker and wall switch. Ensure bulb is securely twisted into the socket. Replace the bulb. |
| Cannot control with remote. | Remote battery low/dead. Bulb not paired with remote. Out of range. | Replace remote battery. Refer to remote control manual for pairing instructions. Move closer to the bulb (within 30m). |
| Cannot control with app/voice. | No 2.4GHz gateway. Gateway not connected/configured. Bulb not paired with gateway. | A 2.4GHz gateway is required for app/voice control. Check gateway's power and network connection. Refer to gateway manual for pairing instructions. |
| Light flickers or dims unexpectedly. | Unstable power supply. Incompatible dimmer switch (if applicable). | Ensure stable power. This bulb is designed for 2.4GHz RF control, not traditional dimmers. Remove any incompatible dimmer switches. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | FUT107 |
| Brand | MiBOXER |
| Type | GU10 Dual White LED Spotlight |
| Power Consumption | 6W |
| Input Voltage | AC100-240V, 50/60Hz |
| Luminous Flux | 580LM |
| Color Temperature | 2700K (Warm White) - 6500K (Cool White) |
| Control Method | 2.4GHz RF Wireless Control |
| Control Distance | Up to 30m |
| Operating Temperature | -20°C to 60°C |
| Material | Plastic |
| Dimensions | Ø50mm x 72mm |
| Weight | 3.2 ounces (approx. 0.092 KGS) |
| Energy Efficiency Class | E (EPREL Link) |
Figure 6: Energy efficiency label for the FUT107, indicating class E and 6 kWh/1000h consumption.
Warranty and Support
MiBOXER products are designed for reliability and performance. For warranty information and technical support, please refer to the official MiBOXER website or contact your authorized dealer.
For further assistance, you may visit the MiBOXER Store on Amazon.
