Alpine Industries Manual Wall-Mount Soap Dispenser

Introduction

This manual provides instructions for the proper installation, operation, and maintenance of your Alpine Industries Manual Wall-Mount Soap Dispenser. Designed for durability and ease of use, this dispenser is suitable for various environments, including bathrooms and kitchens in commercial and residential settings.

The Alpine Industries Manual Soap Dispenser, shown in gray, with its product packaging highlighting key features.

Key Features:

• Effortless Operation: User-friendly push button dispenses a precise 0.70 ml of liquid per press.
• Durable Construction: Made from high-quality Acrylonitrile Butadiene Styrene (ABS) for long-lasting use.
• Convenient Visibility: Large sight window allows for easy monitoring of soap levels.
• ADA Compliant: Designed for accessibility, ensuring easy, one-handed operation.
• Large Capacity: 800ml refillable tank minimizes the frequency of refills.

Setup and Installation

Follow these steps to properly install your soap dispenser.

Mounting Instructions:

1. Select a suitable wall location, ensuring it is at an appropriate height for all users and above a sink or counter to catch any drips.
2. Open the dispenser using the provided key.
3. Mark the desired drilling points on the wall using the dispenser's mounting holes as a template.
4. Drill pilot holes and insert wall anchors if necessary (depending on wall material).
5. Secure the dispenser to the wall using the included screws.
6. Close the dispenser and lock it with the key.

The gray soap dispenser is shown installed in a modern bathroom setting, demonstrating its wall-mount design.

This image provides the precise dimensions of the dispenser, measuring 9.6 inches in height, 4.1 inches in width, and 4.6 inches in depth.

Operating Instructions

The Alpine Industries Manual Soap Dispenser is designed for simple and efficient operation.

Dispensing Liquid:

1. Place your hand directly under the dispenser's nozzle.
2. Press the large push button firmly with one hand.
3. A measured amount of approximately 0.70 ml of liquid soap or hand sanitizer will be dispensed.
4. Repeat if more liquid is desired.

This image demonstrates the manual push-button operation, showing liquid soap being dispensed into a hand.

Refilling Instructions

The dispenser features an 800ml refillable tank. Refill when the liquid level is low, as indicated by the sight window.

Steps to Refill:

1. Unlock the dispenser using the provided key and open the front cover.
2. Carefully pour liquid soap or hand sanitizer into the 800ml internal tank. Avoid overfilling.
3. Ensure the liquid is not a foaming soap, as this dispenser is designed for liquid formulations only.
4. Close the front cover and lock it securely with the key.
5. After refilling, it may require several presses to prime the pump and resume dispensing.

This image shows the dispenser opened, illustrating the large 800ml refillable tank designed for easy replenishment of liquid soap or hand sanitizer.

Maintenance

Regular maintenance ensures optimal performance and hygiene.

Cleaning:

• Wipe the exterior of the dispenser regularly with a soft, damp cloth and mild soap.
• Avoid using abrasive cleaners or solvents, as these can damage the finish.
• Periodically clean the nozzle to prevent clogs and ensure smooth dispensing.

Monitoring:

• Utilize the clear sight window on the front of the dispenser to monitor the liquid level.
• Refill promptly when the liquid level is low to avoid interruption of service.

A visual summary of the dispenser's features, including compatibility with various liquids, convenient fill level, secure locking mechanism, and user-friendly design.

Troubleshooting

If you encounter issues with your dispenser, refer to the following common solutions:

• Dispenser is not foaming: This dispenser is designed for liquid soap and hand sanitizer, not foaming soap. Using foaming soap will result in liquid dispensing without foam.
• Liquid is leaking: Ensure the liquid soap or hand sanitizer used has an appropriate viscosity. Very thin liquids may sometimes lead to minor leaks. Check that the dispenser is securely closed and locked.
• No liquid dispenses after refilling: The pump may need to be primed. Press the dispense button repeatedly (5-10 times) until liquid begins to flow consistently.
• Dispenser is clogged: Remove any dried soap or debris from the nozzle. If necessary, empty the tank, rinse with warm water, and re-prime.

Specifications

Warranty and Support

For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official Alpine Industries website. Keep your purchase receipt as proof of purchase for any warranty claims.