NEWQ 2TB External Portable SSD and Filehub AC750 Travel Router User Manual

1. Filehub Setup

To use the Filehub function, connect your external storage device (USB hard drive, USB flash drive, or SD card) to the NEWQ AC750's appropriate port (SD or USB). The device will then create a wireless network that allows other devices (smartphones, tablets, computers) to wirelessly access the connected storage.

Image: The Filehub connected to various storage devices, enabling wireless access from a smartphone.

Steps:

1. Power on the NEWQ AC750.
2. Insert your USB drive into the USB port or your SD card into the SD card slot.
3. Connect your smartphone, tablet, or computer to the NEWQ AC750's Wi-Fi network. The network name (SSID) and default password can usually be found on a sticker on the device or in a quick start guide.
4. Open the NEWQ companion app or access the device's web interface via a browser to manage and transfer files.

2. Router Setup

The NEWQ AC750 can operate in three router modes: Access Point (AP), Router, and Bridge. Configuration is typically done via a web interface or a dedicated mobile application.

General Router Setup Steps:

1. Power on the NEWQ AC750.
2. Connect your device (laptop, smartphone) to the NEWQ AC750's default Wi-Fi network.
3. Open a web browser and navigate to the default IP address (e.g., 192.168.1.1) or use the mobile app.
4. Log in with the default username and password (usually "admin" for both, check device sticker).
5. Follow the on-screen wizard to select your desired mode (AP, Router, or Bridge) and configure network settings (SSID, password, internet connection type).

3. Portable SSD Setup (Fingerprint/Password)

The portable SSD component offers secure access via fingerprint or password. Initial setup involves registering fingerprints and setting a password using the mobile application.

Image: Steps for setting up fingerprint and password encryption via the mobile app and unlocking on a laptop.

Steps for Initial Setup:

1. Connect the portable SSD to your smartphone or computer.
2. Download and install the dedicated NEWQ mobile application (if applicable, check product packaging or website for app name).
3. Open the app and follow the prompts to register your fingerprints and set a secure password.
4. Once configured, you can unlock the SSD using your registered fingerprint or the set password.

Image: Detailed view of the biometric fingerprint technology and the concept of double encryption for enhanced security.

1. Using the Filehub for Wireless File Transfer

Once your external storage is connected and your device is on the NEWQ AC750's Wi-Fi network, you can access files wirelessly. This is ideal for viewing photos, videos, and documents on the go without needing direct cable connections.

Image: Users wirelessly accessing media files from the Filehub on a laptop and smartphone.

Steps for File Access:

1. Ensure the Filehub is powered on and external storage is connected.
2. Connect your client device (phone, tablet, laptop) to the Filehub's Wi-Fi network.
3. Launch the NEWQ app or web interface.
4. Browse the connected storage devices and transfer files as needed.

Image: A smartphone connected to the portable SSD, demonstrating one-click photo backup via an app.

The device also supports one-click backup of phone photo albums via its dedicated application, simplifying data management.

2. Using the Portable SSD

The 2TB portable SSD provides secure storage for your important data. Access is controlled by your registered fingerprint or password.

Accessing the SSD:

• Via Fingerprint: Simply place your registered finger on the sensor to unlock the drive.
• Via Password: If fingerprint access is not available or preferred, enter your set password through the mobile app or a connected computer interface.

The SSD is designed with robust encryption, making unauthorized access impossible even with brute-force attempts.