Introduction
Thank you for choosing the FASDUNT KB7 High Pressure Handheld Shower Head. This manual provides detailed instructions for the safe and efficient installation, operation, and maintenance of your new shower system. Please read this manual thoroughly before installation and retain it for future reference.
Package Contents
Ensure all components are present before beginning installation:
- Handheld Shower Head x 1
- 80-inch Shower Hose x 1
- Adjustable Mount Holder x 1
- Water Flow Restrictor x 1 (pre-installed)
- Teflon Tape x 1
Setup and Installation
The FASDUNT KB7 shower head is designed for easy, tool-free installation. Follow these steps:
- Prepare the Shower Arm: Ensure the existing shower arm is clean and free of debris. If necessary, remove the old shower head.
- Apply Teflon Tape: Wrap the included Teflon tape clockwise around the threads of your shower arm 3-5 times to ensure a watertight seal.
- Install Adjustable Mount Holder: Screw the adjustable mount holder onto the shower arm by hand. Tighten firmly, but do not overtighten.
- Connect Shower Hose: Connect one end of the 80-inch stainless steel hose to the adjustable mount holder and the other end to the handheld shower head. Both ends of the hose feature universal G1/2 threads and pre-installed rubber washers, ensuring a secure fit. Hand-tighten both connections.
- Check for Leaks: Turn on the water supply and check all connections for leaks. If leaks occur, tighten connections slightly or reapply Teflon tape.
Operating Instructions
Your FASDUNT KB7 shower head offers multiple spray settings and a convenient ON/OFF pause button for a customized showering experience.
Spray Modes
The shower head features 5 distinct spray settings. To switch between modes, simply rotate the handle on the shower head panel:
- Misty: A fine, gentle mist for a soothing experience.
- Rain + Massage: A combination of rainfall and pulsating massage for comprehensive coverage and relaxation.
- Massage: Concentrated, pulsating streams for a therapeutic massage.
- Rain: A classic, full-coverage rainfall spray for everyday showering.
- Misty + Massage: A blend of fine mist and invigorating massage.
ON/OFF Pause Button
The integrated ON/OFF pause button on the handle allows you to temporarily stop the water flow without adjusting the main faucet. This is convenient for tasks such as lathering, shampooing, or bathing children and pets, conserving water and maintaining your preferred water temperature. For safety, always close the main faucet valve after showering.
Extra Long Hose Functionality
The 80-inch extra-long stainless steel hose provides extended reach and flexibility, making it ideal for:
- Shaving legs
- Bathing children and pets
- Cleaning the shower or bathtub
Maintenance
Regular maintenance ensures optimal performance and longevity of your FASDUNT KB7 shower head.
Self-Cleaning Silicone Nozzles
The unique self-cleaning silicone nozzles are designed to prevent the accumulation of grime and hard water buildup. To clean, simply rub your finger across the nozzles periodically to dislodge any mineral deposits. This helps maintain consistent water flow and extends the product's service life.
Hose and Holder Care
The 80-inch heavy-duty stainless steel hose is anti-rust, anti-twist, and anti-leaking. The 360° adjustable shower head holder features a solid brass swivel ball joint. Clean these components with a soft cloth and mild soap as needed. Avoid abrasive cleaners that may damage the finish.
Troubleshooting
If you encounter any issues with your FASDUNT KB7 shower head, refer to the following common solutions:
- Low Water Pressure:
- Check if the water flow restrictor is installed. The shower head operates at 1.8 Gallons Per Minute (GPM) with the restrictor and 2.5 GPM without it. Removing the restrictor can increase water pressure, but please check local regulations regarding flow rates.
- Ensure the main water supply valve is fully open.
- Clean the silicone nozzles as described in the Maintenance section to remove any clogs.
- Leaks at Connections:
- Ensure all connections (shower arm to mount, mount to hose, hose to shower head) are hand-tightened securely.
- Verify that the rubber washers are properly seated in all connections.
- Reapply Teflon tape to the shower arm threads if necessary.
- Difficulty Changing Spray Modes:
- Ensure the shower head is clean and free of mineral buildup that might impede the rotation mechanism.
- Apply gentle, firm pressure when rotating the handle.
Specifications
| Feature | Detail |
|---|---|
| Brand | FASDUNT |
| Model Number | KB7 |
| Style | 6 Spray-Settings (5 listed in feature bullets, 6 in style spec) |
| Shape | Round |
| Material | Acrylonitrile Butadiene Styrene (ABS) |
| Finish Type | Matt |
| Installation Type | Wall Mounted |
| Flow Rate | 1.8 Gallons Per Minute (GPM) with restrictor, 2.5 GPM without restrictor |
| Color | Matte Black |
| Product Dimensions | 11.02"L x 4.72"W |
| Hose Length | 80 Inches |
| Item Weight | 1.43 pounds |
| Special Features | 80'' Extra Long Stainless Steel Hose, Detachable, Easy to Install, Tools Free Installation, ON/OFF Pause Button, Self-cleaning Silicone Nozzle |
Warranty and Support
For any questions, concerns, or support needs regarding your FASDUNT KB7 shower head, please contact FASDUNT customer service. Refer to your purchase documentation or the official FASDUNT website for specific warranty details and contact information.