ROBOTIME TW03H Wooden Flower Basket Craft Kit Instruction Manual

Introduction

This instruction manual provides detailed guidance for assembling your ROBOTIME TW03H Wooden Flower Basket Craft Kit. Please read all instructions carefully before beginning assembly to ensure a smooth and enjoyable building experience. This kit is designed for individuals aged 14 and above.

Figure 1: Fully assembled Wooden Flower Basket.

What's in the Box

Before starting, verify that all components listed below are present in your kit. If any parts are missing or damaged, please refer to the "Warranty and Support" section.

Figure 2: All components included in the kit.

Components List:

• Pre-cut wooden sheets for various flower and basket parts.
• Artificial greenery (e.g., eucalyptus, decorative love balls, flower stems).
• Cardboard flower basket components.
• Ribbon for bow-knot.
• Instruction manual (this guide).
• Small accessories (e.g., plastic fasteners, decorative tag).

Note: The kit contains 428 individual pieces. Handle with care during unboxing.

Assembly Instructions (Setup)

Follow these steps to assemble your Wooden Flower Basket. It is recommended to have a clean, flat workspace.

1. Preparation: Carefully detach all wooden pieces from their sheets. Use a small tool or your fingers to gently push them out. Be cautious with delicate parts.
2. Flower Assembly:
   • Assemble each wooden flower according to the diagrams in the included instruction guide. Pay attention to the orientation of each petal and stem piece.
   • For flowers like the Pink Lily, ensure the petals are curved slightly as shown in the diagrams for a natural appearance.
   

   Figure 3: Assembling individual flower components.
3. Basket Assembly: Construct the cardboard flower basket. Fold along the pre-scored lines and secure the sides as indicated in the manual.
4. Arrangement:
   • Once all flowers and greenery are assembled, begin arranging them within the basket. The basket features multiple holes for fixation.
   • Insert the stems of the wooden flowers and artificial greenery into the designated holes. Experiment with different placements to achieve your desired aesthetic.
   • The artificial flower stems are adjustable; bend them gently to create varied heights and angles.
   

   Figure 4: Key assembly features including flexible stems and multi-hole fixation.

5. Final Touches: Attach the decorative tag and ribbon to the basket handle. Ensure all pieces are securely in place.

Assembly Video Guide:

Flower List

The TW03H kit includes a variety of wooden and artificial flowers and greenery to create a diverse bouquet:

Figure 5: Detailed view of the flower types included in the kit.

• Pink Lily
• Red Rose
• Chamomile
• Pink Carnation
• Dark Eucalyptus
• Light Colored Eucalyptus
• Artificial Eucalyptus
• Artificial Decorative Love Ball
• Artificial Flower Stem

Care and Maintenance

To ensure the longevity and appearance of your ROBOTIME Wooden Flower Basket, follow these care guidelines:

• Dusting: Gently dust the wooden flowers and basket with a soft, dry cloth or a soft brush. Avoid abrasive cleaners.
• Placement: Keep the assembled kit away from direct sunlight and high humidity to prevent warping or fading of the wooden components.
• Handling: Handle the basket and flowers with care to avoid accidental breakage of delicate parts.
• Cleaning: Do not use water or chemical cleaning agents on the wooden parts. For artificial greenery, a slightly damp cloth can be used if necessary, then air dry completely.

Troubleshooting

If you encounter any issues during assembly or with the finished product, consider the following:

• Difficulty Detaching Pieces: If a piece is difficult to remove from the wooden sheet, gently rock it back and forth or use a craft knife (with extreme caution) to cut any remaining connections. Do not force pieces.
• Loose Connections: If a wooden piece fits too loosely, a small drop of wood glue (not included) can be used to secure it. Apply sparingly.
• Broken Pieces: In case of a broken piece, attempt to repair it with wood glue. If repair is not possible, refer to the "Warranty and Support" section for replacement options.
• Assembly Order: Always follow the step-by-step instructions provided in the kit's manual. Deviating from the order may cause difficulties.

Specifications

Warranty and Support

ROBOTIME is committed to providing a positive building experience. If you encounter any issues with your kit, such as missing or broken parts, please contact ROBOTIME customer support for assistance.

Part Replacement Service: If some parts are broken or lost during assembly, ROBOTIME offers a part replacement service. Please reach out to customer service with details of the issue and the specific parts required.

For further support, visit the official ROBOTIME website or contact their customer service department directly. Contact information can typically be found on the product packaging or the brand's official online store.

Figure 6: ROBOTIME's commitment to part replacement service.