Pipishell Fluted TV Stand (Model AMRTS03N-US) Instruction Manual

1. Introduction

This manual provides instructions for the assembly, operation, and maintenance of your Pipishell Fluted TV Stand. This 59-inch wide entertainment center is designed to support televisions up to 65 inches and features a sturdy P2-grade engineered wood frame capable of holding up to 220 lbs. It includes two open shelves and three deep drawers for organized storage of media devices, accessories, and decor.

Image 1.1: The Pipishell Fluted TV Stand in a modern living room setup.

2. Safety Information

Please read and understand all safety instructions before assembling and using this product. Failure to follow these instructions may result in injury or damage to the product.

• Ensure all parts are correctly assembled before use. Incorrect assembly can lead to instability.
• Do not exceed the maximum weight capacity of 220 lbs on the top surface. Overloading can cause structural failure.
• Always use the included anti-tipping hardware to secure the unit to a wall stud. This is crucial for preventing tip-over accidents, especially in households with children or pets.
• Avoid placing hot items directly on the surface without adequate protection to prevent heat damage.
• Keep liquids away from the unit to prevent damage to the engineered wood.
• Do not allow children to climb on or play with the unit. The rounded edges are designed for safety, but supervision is always recommended.

Image 2.1: Key safety and design features including the stable base and rounded corners.

3. Parts List

The product package includes all necessary components and hardware for assembly. Please verify all parts are present and undamaged before beginning. Refer to the separate "Assembly Guide" for a detailed list and identification of each part.

Key Components (Illustrative):

• Top Panel (1)
• Side Panels (2)
• Bottom Panel (1)
• Middle Dividers (2)
• Drawer Fronts (3)
• Drawer Sides, Backs, Bottoms (for 3 drawers)
• Drawer Handles (3)
• Drawer Slides (6)
• Back Panel (1)
• Hardware Pack (screws, dowels, cam locks, anti-tipping kit)

4. Setup and Assembly

This TV stand is designed for easy assembly with clear instructions and labeled parts. A Phillips head screwdriver (not included) is the only tool required.

4.1 Preparation

• Clear a spacious, clean, and level area for assembly.
• Lay out all parts on a soft surface (e.g., carpet or blanket) to prevent scratches.
• Identify all components using the provided "Assembly Guide" and corresponding labels.

4.2 Assembly Steps

1. Follow the step-by-step instructions in the dedicated "Assembly Guide" provided with your product.
2. Ensure all cam locks and screws are tightened securely for optimal stability.
3. Install the smooth metal drawer slides onto the side panels and drawer boxes as directed.
4. Attach the ergonomic handles to the fluted drawer fronts.
5. Utilize the built-in cable cutout on the back panel for organized wire management of your electronic devices.
6. Once the unit is fully assembled, attach the anti-tipping hardware to a wall stud for enhanced safety.

Image 4.1: Thoughtful design features for ease of use and assembly.

5. Operating and Usage

Your Pipishell Fluted TV Stand is designed for functional and aesthetic integration into your living space.

5.1 Television Placement

• Place your television centrally on the top surface of the stand. This unit is suitable for TVs up to 65 inches.
• Ensure the TV's weight does not exceed the 220 lbs capacity of the stand.

Image 5.1: The TV stand is designed to accommodate TVs up to 65 inches.

5.2 Storage Utilization

• Open Shelves: The two open shelves provide convenient access for media devices such as game consoles, cable boxes, or soundbars.
• Drawers: The three deep drawers are ideal for discreetly storing remote controls, cables, manuals, or other small items, helping to maintain a clutter-free environment. The drawers feature smooth-sliding rails for easy access.

6. Maintenance

Proper care and maintenance will ensure the longevity and appearance of your TV stand.

6.1 Cleaning

• Wipe surfaces with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners, which can damage the finish.
• For spills, wipe immediately with a dry cloth to prevent staining, as the P2 engineered wood resists water.

6.2 Care

• Regularly check all hardware connections and tighten if necessary to maintain the unit's stability.
• Avoid direct sunlight exposure for prolonged periods to prevent potential fading or discoloration of the natural oak finish.
• Protect surfaces from scratches by using coasters or protective pads under items.

7. Troubleshooting

If you encounter any issues with your TV stand, refer to the following common solutions:

• Unit Wobbles:
  • Check all assembly hardware (screws, cam locks) to ensure they are fully tightened.
  • Verify the unit is placed on a level surface.
  • Ensure the anti-tipping hardware is securely installed to the wall.
• Drawers Do Not Slide Smoothly:
  • Check that the drawer slides are correctly installed and aligned on both the drawer box and the unit frame.
  • Ensure there are no obstructions in the drawer tracks.
  • Verify the drawer box itself is assembled squarely.
• Missing Parts or Damaged Components:
  • If you find any parts missing or damaged upon opening the package, please contact Pipishell customer support immediately for assistance.

8. Specifications

Image 8.1: Detailed product dimensions and weight capacity.

9. Warranty and Support

9.1 Warranty

For specific warranty details regarding your Pipishell Fluted TV Stand, please refer to the product packaging or the official Pipishell website. Warranty terms and conditions may vary.

9.2 Customer Support

For any questions, assistance with assembly, missing parts, or other support needs, please contact Pipishell customer support. Contact information can typically be found on the brand's official website or through your purchase platform. This product is also eligible for a 30-day easy return policy through the retailer.