1. Introduction
This manual provides detailed instructions for the proper use and maintenance of your MiBOXER C4 RGB+CCT Remote. This 2.4GHz wireless remote control is designed to manage compatible MiBOXER RGB+CCT lighting products, offering precise control over brightness, color temperature, and RGB colors across up to four independent zones.
Please read this manual thoroughly before operating the device to ensure safe and efficient use.
2. Safety Information
- Do not expose the remote to moisture or extreme temperatures.
- Keep out of reach of children.
- Use only the specified battery type (2 x AAA batteries, not included).
- Dispose of used batteries responsibly according to local regulations.
- Do not attempt to disassemble or modify the remote control. This will void the warranty.
3. Package Contents
Verify that all items are present in the package:
- MiBOXER C4 RGB+CCT Remote Control
- User Manual (this document)
Image: The MiBOXER C4 remote control shown alongside its retail packaging and a small instruction leaflet.
4. Product Overview
Familiarize yourself with the buttons and indicators on your C4 remote control.
Image: A diagram illustrating the MiBOXER C4 remote control with labels for its indicator light, brightness/CCT/RGB touch strip, ON button (Link/Unlink), and OFF button.
- Indicator Light: Displays the current operating mode.
- Red: Brightness Mode
- Yellow: CCT (Color Temperature) Mode
- Green: RGB Mode
- Brightness/CCT/RGB Touch Strip: Used to adjust brightness, color temperature, or RGB color depending on the active mode.
- ON Button (Link/Unlink):
- Short Press: Turns the linked lights ON.
- Continuous Short Press: Cycles through dimming modes (Brightness → CCT → RGB).
- Press and Hold (within 3 seconds of powering on a light): Links the remote to the light.
- OFF Button: Turns the linked lights OFF.
Note: If there is no operation for 3 seconds, the remote automatically returns to Brightness Mode.
5. Setup
5.1 Battery Installation
- Locate the battery compartment on the back of the remote control.
- Open the battery cover.
- Insert two (2) AAA batteries, ensuring correct polarity (+/-).
- Close the battery cover securely.
5.2 Linking the Remote to Lights
To control your MiBOXER lights, the C4 remote must be linked to them. This process typically involves pairing the remote with the light fixture within a short timeframe after the light is powered on.
- Ensure the light fixture you wish to link is powered OFF.
- Power ON the light fixture.
- Within 3 seconds of powering on the light, press and hold the ON button on the C4 remote.
- The light should flash several times, indicating successful linking.
- If linking fails, power OFF the light, wait 10 seconds, and repeat steps 2-4.
Note: For multi-zone control, repeat the linking process for each zone or group of lights you wish to assign to a specific zone on the remote (if your light supports zone assignment).
6. Operating Instructions
6.1 Power On/Off
- To turn lights ON: Short press the ON button.
- To turn lights OFF: Short press the OFF button.
6.2 Switching Modes (Brightness, CCT, RGB)
The C4 remote operates in three main modes, indicated by the color of the indicator light:
- To cycle through modes: Continuously short press the ON button. The sequence is Brightness (Red) → CCT (Yellow) → RGB (Green).
- The remote will automatically revert to Brightness Mode if no operation is performed for 3 seconds.
6.3 Adjusting Brightness
When the indicator light is Red (Brightness Mode):
- Slide your finger along the Brightness/CCT/RGB Touch Strip to increase or decrease the light intensity.
6.4 Adjusting Color Temperature (CCT)
When the indicator light is Yellow (CCT Mode):
- Slide your finger along the Brightness/CCT/RGB Touch Strip to adjust the color temperature from warm white to cool white.
6.5 Adjusting RGB Color
When the indicator light is Green (RGB Mode):
- Slide your finger along the Brightness/CCT/RGB Touch Strip to select your desired RGB color.
7. Maintenance
- Cleaning: Use a soft, dry cloth to clean the surface of the remote. Do not use abrasive cleaners or solvents.
- Battery Replacement: Replace batteries when the remote's response becomes sluggish or the indicator light dims. Always replace both AAA batteries simultaneously.
- Storage: If storing the remote for an extended period, remove the batteries to prevent leakage.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Remote not responding. | Low or dead batteries. Remote not linked to lights. Out of range. | Replace batteries. Re-link the remote to the lights (see Section 5.2). Move closer to the lights (within 30m). |
| Lights not changing color/brightness. | Incorrect mode selected. Light fixture not compatible. | Cycle through modes using the ON button until the correct indicator light color appears (Red for Brightness, Yellow for CCT, Green for RGB). Ensure your light fixture is a MiBOXER RGB+CCT compatible product. |
| Linking fails. | Timing issue during linking. Light already linked to another remote/zone. | Ensure you press and hold the ON button within 3 seconds of powering on the light. Try again. If the light was previously linked, you may need to unlink it first (refer to your light fixture's manual for unlinking procedures, as this remote does not have a dedicated unlink function). |
9. Specifications
| Model | C4 |
| Wireless Frequency | 2.4GHz RF |
| Control Distance | Up to 30 meters (98 feet) |
| Zones Supported | 4 Zones (with compatible MiBOXER products) |
| Power Supply | 2 x AAA Batteries (not included) |
| Compatibility | MiBOXER RGB+CCT controllers, gateways, and lighting products |
| Dimensions | 140mm x 40mm x 7mm (approx. 5.51 x 1.57 x 0.28 inches) |
| Weight | Approx. 2.08 ounces (without batteries) |
| Item Model Number | febec019-685b-4f66-b1e2-c25abc047cee |
Image: A technical drawing showing the dimensions of the MiBOXER C4 remote control in millimeters, along with its packaging dimensions.
10. Warranty and Support
MiBOXER products are designed for reliability and performance. For specific warranty details, please refer to the warranty card included with your product or visit the official MiBOXER website. Keep your purchase receipt as proof of purchase.
For technical support, troubleshooting assistance, or inquiries about compatible products, please contact MiBOXER customer service through their official channels. Contact information can typically be found on the product packaging or the MiBOXER website.
You can visit the MiBOXER Store on Amazon for more information and product listings.
