Bonnlo BFC567
Contents
Bonnlo Beach Fishing Cart User Manual
Model: BFC567 | Brand: Bonnlo
1. Introduction
Thank you for choosing the Bonnlo Beach Fishing Cart. This manual provides essential information for the safe assembly, operation, and maintenance of your new cart. Please read these instructions thoroughly before use and retain them for future reference.
2. Safety Information
Observe the following safety guidelines to prevent injury or damage to the product:
- Do not exceed the maximum load capacity of 220 lbs (100 kg). Overloading can cause instability and damage.
- Ensure all components are securely fastened before each use.
- Distribute weight evenly on the cargo deck to maintain balance.
- Keep hands and feet clear of moving parts during folding and unfolding.
- Do not allow children to play with or ride on the cart.
- Use caution when pulling the cart over uneven terrain or inclines.
- Regularly inspect the wheels and frame for wear or damage.
3. Package Contents
Verify that all components are present before beginning assembly:
- Main Cart Frame (Foldable)
- 12-inch Balloon Wheels (x2)
- Hand Pump for Wheels
- Fishing Rod Holders (x2)
- Water Bottle Holder (x1)
- Mesh Storage Bag (x1)
- Tie-down Straps (x2)
- Assembly Hardware (Pins, Washers, etc.)
4. Assembly Instructions
Follow these steps to assemble your Bonnlo Beach Fishing Cart:
- Unfold the Main Frame: Carefully unfold the main aluminum frame until it locks into place. Ensure the cargo deck is flat and stable.
- Attach the Wheels: Slide one 12-inch balloon wheel onto each axle at the rear of the cart. Secure each wheel with the provided pins and washers. Ensure the wheels spin freely.
- Inflate Wheels: Use the included hand pump to inflate the balloon wheels to the recommended pressure (typically 2-4 PSI). Do not overinflate.
- Install Handle: Extend the adjustable handle to your desired height and secure it with the locking mechanisms.
- Attach Accessories: Secure the fishing rod holders, water bottle holder, and mesh storage bag to the designated points on the cart frame using their integrated fasteners.

Figure 4.1: Fully assembled Bonnlo Beach Fishing Cart, showcasing the main frame, balloon wheels, hand pump, and tie-down straps.

Figure 4.2: Illustration of the cart's scalable handle and folding capability for compact storage and transport.
5. Operation
This section details how to effectively use your beach fishing cart.
5.1 Loading the Cart
- Place heavier items on the cargo deck first, centered over the wheels for stability.
- Utilize the fishing rod holders for secure transport of fishing rods.
- Store smaller items in the mesh bag and beverages in the water bottle holder.
- Use the provided tie-down straps to secure your cargo, preventing shifting during transport.

Figure 5.1: The cart loaded with various items, demonstrating its 220 lbs maximum loading capacity and the 23" x 15" cargo deck.
5.2 Transporting the Cart
- Grasp the adjustable handle firmly.
- Pull the cart behind you, allowing the large balloon wheels to glide over sand and uneven surfaces.
- For optimal performance on soft sand, ensure wheels are properly inflated.

Figure 5.2: A person pulling the loaded cart across a sandy beach, illustrating its ease of movement.
5.3 Folding for Storage
- Remove all items from the cart.
- Retract the adjustable handle to its lowest position.
- Follow the reverse of the assembly steps to fold the main frame. Ensure all locking mechanisms are disengaged before folding.
- Secure the folded cart with any integrated straps or Velcro to prevent it from unfolding during transport or storage.
6. Maintenance
Proper maintenance ensures the longevity and performance of your cart.
- Cleaning: After each use, especially in saltwater environments, rinse the entire cart with fresh water to remove sand, salt, and debris. Dry thoroughly to prevent corrosion.
- Wheel Care: Check tire pressure regularly. Inspect wheels for punctures or damage. Keep the axle area clean of sand and grit.
- Frame Inspection: Periodically check all bolts, screws, and pins for tightness. Tighten any loose fasteners. Inspect the aluminum frame for any signs of bending or cracking.
- Storage: Store the cart in a dry, protected area when not in use. Folding the cart can save storage space.

Figure 6.1: The cart's aluminum frame is designed to resist rust, even in saltwater conditions, highlighting its durability.
7. Troubleshooting
Refer to this table for common issues and their solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Cart is difficult to pull on sand. | Wheels are underinflated or overloaded. | Inflate wheels to recommended PSI (2-4 PSI). Reduce load if necessary. |
| Cart feels unstable. | Uneven weight distribution or loose fasteners. | Redistribute cargo evenly. Check and tighten all bolts and pins. |
| Handle does not extend/retract smoothly. | Sand or debris in the telescoping mechanism. | Clean the handle mechanism thoroughly. Apply a silicone-based lubricant if needed. |
| Wheel wobbles. | Loose axle pin or damaged wheel bearing. | Ensure axle pin is fully inserted and secured. If damage persists, contact customer support. |
8. Specifications
Key technical details for the Bonnlo Beach Fishing Cart:
| Feature | Detail |
|---|---|
| Model Number | BFC567 |
| Brand | Bonnlo |
| Material | Aluminum Frame |
| Color | Orange |
| Wheel Type | 12-inch Inflatable Balloon Wheels (Pneumatic) |
| Number of Wheels | 2 |
| Cargo Deck Dimensions | 23" x 15" (58cm x 38.5cm) |
| Maximum Load Capacity | 220 lbs (100 kg) |
| Item Weight | 25.3 lbs (11.5 kg) |
| Package Dimensions | 31.89 x 16.14 x 9.65 inches |
| Special Features | Adjustable Handle, Compact, Foldable, Heavy Duty, Sturdy, Rust-resistant |

Figure 8.1: Detailed dimensions of the Bonnlo Beach Fishing Cart in both extended and folded configurations.
9. Warranty and Support
For warranty information or technical support, please refer to the product packaging or contact Bonnlo customer service directly. Keep your purchase receipt as proof of purchase.
Documents and downloads
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.