Elevon QD-MINIPWM-GY-1G Portable Mini Washing Machine with Spin Dryer User Manual

1. Product Overview

The Elevon QD-MINIPWM-GY-1G is a compact, portable washing machine designed for small loads, ideal for apartments, dorms, RVs, and small homes. It features a 2-in-1 function for both washing and spin-drying clothes in a single tub.

Image 1.1: Front view of the Elevon portable mini washing machine with its spin basket.

Product Components

Image 1.2: Diagram illustrating the main components of the washing machine.

• Pulsator & Spin Tub: Located at the bottom of the washing compartment, responsible for agitating clothes during wash and spinning during drying.
• Safety Cover: A protective cover placed over the spin tub during the spin cycle.
• Water Inlet: Connection point for the water supply hose.
• Wash Timer: Rotary knob to set the washing duration (0-15 minutes).
• Wash Selector: Rotary knob to select between WASH, SPIN, or OFF modes.
• Drain Hose: Flexible hose for discharging water.
• Power Wire: Electrical cord for connecting to a power source.
• Non-slip Foot Pads: Located at the base for stability.

2. Safety Instructions

Please read all safety instructions carefully before operating the appliance to prevent injury or damage.

• Ensure the power supply voltage matches the rating label on the machine.
• Do not immerse the machine, power cord, or plug in water or other liquids.
• Always unplug the machine from the power outlet when not in use, before cleaning, or before performing any maintenance.
• Keep children away from the appliance during operation.
• Do not operate the machine if the power cord or plug is damaged. Contact qualified personnel for repair.
• Place the machine on a stable, level surface to prevent tipping or excessive vibration during operation.
• Do not wash waterproof clothing or items that float easily, as this may cause imbalance during the spin cycle.
• Ensure the drain hose is properly positioned to prevent water leakage.
• Important: This machine does not automatically stop filling with water. You must monitor the water level and turn off the water supply manually to prevent overflow.

3. Setup

1. Unpacking: Carefully remove the washing machine from its packaging. Check for any damage during transit.
2. Placement: Place the machine on a firm, flat, and stable surface. Ensure there is enough space around it for ventilation and operation. Avoid placing it on soft surfaces like carpets during operation to prevent overheating.
3. Water Inlet Connection: Connect the water inlet hose to the water inlet port on the machine and to a suitable water faucet. Ensure connections are secure to prevent leaks.
4. Drain Hose Positioning: Position the drain hose to allow for proper water drainage. The hose can be placed in a sink, bucket, or floor drain. Ensure the hose is not kinked or blocked.
5. Power Connection: Plug the power cord into a grounded electrical outlet.

4. Operating Instructions

Control Panel Overview

Image 4.1: Detailed view of the control panel with Wash Timer and Wash Selector.

• Wash Timer: Sets the duration for the wash cycle (0-15 minutes).
• Wash Selector: Selects the operation mode: WASH, SPIN, or OFF.

Washing Cycle

1. Load Clothes: Open the lid and place clothes into the washing tub. Do not exceed the maximum capacity of 5.5 lbs (approximately 3 pairs of sweats or 4 T-shirts). Overloading can affect washing performance.
2. Add Water: Turn on the water supply to fill the tub. Important: The machine does not have an automatic water level sensor. You must monitor the water level and turn off the water supply manually to prevent overflow.
3. Add Detergent: Add the appropriate amount of laundry detergent.
4. Set Wash Timer: Turn the 'Wash Timer' knob to your desired washing duration (e.g., 5-10 minutes).
5. Select Wash Mode: Turn the 'Wash Selector' knob to 'WASH'. The machine will begin agitating.
6. Drain Water: Once the wash cycle is complete, turn the 'Wash Selector' knob to 'OFF' and then position the drain hose to empty the water.

Spin-Drying Cycle

1. Transfer Clothes: After washing and draining, transfer the wet clothes into the spin basket. Ensure clothes are evenly distributed to prevent imbalance. Do not overload the spin basket.
2. Place Safety Cover: Securely place the safety cover over the clothes in the spin basket. This is crucial for safe operation.


Image 4.2: Placing the safety cover over the spin tub.

3. Set Spin Timer: Turn the 'Wash Timer' knob to your desired spin duration (e.g., 1-5 minutes).
4. Select Spin Mode: Turn the 'Wash Selector' knob to 'SPIN'. The machine will begin spinning.
5. Monitor: During the spin cycle, the machine may vibrate. If vibration is excessive or the machine moves, stop the cycle, redistribute the clothes, and restart.
6. Remove Clothes: Once the spin cycle is complete, turn the 'Wash Selector' knob to 'OFF' and remove the clothes.

5. Maintenance

Regular maintenance ensures optimal performance and extends the lifespan of your washing machine.

• Cleaning the Tub: After each use, wipe the inside of the tub with a clean, damp cloth to remove any detergent residue or lint.
• Exterior Cleaning: Clean the exterior of the machine with a soft, damp cloth. Do not use abrasive cleaners or solvents.
• Drain Hose: Ensure the drain hose is clear of blockages. Periodically check for any kinks or damage.
• Storage: If storing the machine for an extended period, ensure it is completely dry. Disconnect the water inlet and drain hoses, and store them properly. Store the machine in a dry, cool place.
• Filter Cleaning: While not explicitly mentioned, it is good practice to check for and clean any lint filters if present, according to general appliance maintenance.

6. Troubleshooting

Refer to this section for common issues and their solutions.

7. Specifications

Technical details for the Elevon QD-MINIPWM-GY-1G Portable Mini Washing Machine.

8. Warranty and Support

This product comes with a 1 Year Manufacturer Warranty.

For warranty claims, technical support, or further assistance, please refer to the manufacturer's official website or contact the retailer from whom the product was purchased. Please retain your proof of purchase for warranty purposes.