HBN Digital Outdoor Timer Socket (Model CP-GOE22-1) - Instruction Manual

1. Introduction

Thank you for choosing the HBN Digital Outdoor Timer Socket. This device is designed to provide flexible and reliable control over your outdoor electrical appliances, such as garden lighting, pool pumps, and holiday decorations. With its 8 programmable settings, random function, and IP44 weather resistance, it offers convenience and energy efficiency. Please read this manual thoroughly before use to ensure proper operation and safety.

2. Safety Instructions

• Ensure the timer is correctly installed and connected to a suitable power outlet.
• Do not exceed the maximum load capacity of 16A/3680W. Overloading can cause damage or fire.
• The timer is rated IP44 for outdoor use, meaning it is protected against splashing water from any direction. However, do not immerse the device in water or expose it to direct, heavy rainfall for extended periods.
• Do not open or attempt to repair the device. Refer all servicing to qualified personnel.
• Keep children away from the device. The integrated child lock provides additional safety.
• Always unplug the timer from the power outlet before cleaning.

3. Package Contents

Your package should contain the following items:

• HBN Digital Outdoor Timer Socket (x2)
• Instruction Manual (this document)

4. Product Overview

The HBN Digital Outdoor Timer Socket features a clear digital display and intuitive buttons for easy programming. Below is an illustration of the device and its main components.

Image 1: Two HBN Digital Outdoor Timer Sockets, front view.

Image 2: Close-up of the timer's display and control buttons.

Button Functions:

• WEEK: Selects the day(s) of the week for programming.
• HOUR: Adjusts the hour setting.
• MIN: Adjusts the minute setting.
• CLOCK: Exits programming mode and displays the current time. Used to set the current time.
• PROG: Enters and cycles through the 8 ON/OFF program settings.
• MANUAL: Toggles between ON, AUTO, and OFF modes.
• RND (Random): Activates or deactivates the random function.
• Reset: Clears all settings and returns the timer to factory defaults. Use a pointed object (e.g., a pen tip) to press.

5. Setup

5.1 Initial Charging and Reset

Before first use, or after a long period of inactivity, plug the timer into a live power outlet for at least 30 minutes to charge the internal backup battery. This ensures that settings are retained during power outages.

After charging, press the Reset button using a pointed object to clear any pre-existing settings and ensure a fresh start.

5.2 Setting Current Time and Day

1. Press and hold the CLOCK button.
2. While holding CLOCK, press WEEK repeatedly to set the current day of the week (MO, TU, WE, TH, FR, SA, SU).
3. While holding CLOCK, press HOUR repeatedly to set the current hour (12-hour or 24-hour format).
4. While holding CLOCK, press MIN repeatedly to set the current minute.
5. Release the CLOCK button. The current time and day are now set.

6. Operating Instructions

6.1 Setting ON/OFF Programs

The timer allows you to set up to 8 ON/OFF programs. Each program consists of an ON time and an OFF time, along with specific days of the week.

Image 3: Examples of setting ON and OFF times for different programs.

1. Press the PROG button once. The display will show "1 ON". This is for setting the first ON time.
2. Press WEEK repeatedly to select the desired day(s) for this program. Options include individual days, weekdays (MO TU WE TH FR), weekends (SA SU), all days (MO TU WE TH FR SA SU), or various combinations.
3. Press HOUR to set the desired hour for the ON time.
4. Press MIN to set the desired minute for the ON time.
5. Press PROG again. The display will show "1 OFF". This is for setting the first OFF time.
6. Repeat steps 2-4 to set the day(s), hour, and minute for the OFF time. Ensure the day selection matches the ON time if you want the program to apply to the same days.
7. Continue pressing PROG to cycle through programs 2 ON, 2 OFF, up to 8 ON, 8 OFF. Repeat the setting process for each program as needed.
8. After setting all desired programs, press the CLOCK button to exit programming mode and return to the current time display.

6.2 Random Function

The random function is designed to simulate presence by randomly turning the connected appliance ON and OFF within a specific time window, typically around your programmed ON/OFF times. This can deter potential intruders.

Image 4: The random function (RND) activated on the timer display.

1. To activate the random function, press the RND button. The display will show "RND".
2. To deactivate, press the RND button again. "RND" will disappear from the display.

6.3 Manual Control (ON/AUTO/OFF)

You can manually override the programmed settings using the MANUAL button.

• Press MANUAL once: The timer switches to ON mode (output is continuously ON).
• Press MANUAL again: The timer switches to AUTO mode (follows programmed settings).
• Press MANUAL a third time: The timer switches to OFF mode (output is continuously OFF).

6.4 Summer/Winter Time Adjustment

To adjust for daylight saving time:

1. Press and hold the CLOCK button.
2. While holding CLOCK, press the MANUAL button. The display will show "+1h" for summer time or revert to normal for winter time.

7. Maintenance

7.1 Cleaning

To clean the timer, unplug it from the power outlet. Wipe the exterior with a soft, damp cloth. Do not use abrasive cleaners, solvents, or immerse the device in water.

7.2 Storage

When not in use for extended periods, store the timer in a cool, dry place, away from direct sunlight and extreme temperatures.

8. Troubleshooting

• Timer not turning ON/OFF as programmed:
  • Check if the timer is in AUTO mode (not ON or OFF manually).
  • Verify that the programmed ON/OFF times and days are set correctly.
  • Ensure the connected appliance is working and properly plugged into the timer.
• Display is blank:
  • Ensure the timer is plugged into a live power outlet.
  • The internal backup battery might be completely drained. Plug the timer in for at least 30 minutes to charge it.
• Settings are lost after power outage:
  • The internal backup battery may not be sufficiently charged. Ensure the timer is regularly connected to power. If settings are lost, re-enter them after charging.
• Random function not working:
  • Ensure the RND function is activated (RND icon visible on display).
  • The random function operates around programmed times; ensure at least one program is set.

9. Specifications

Image 5: Back of the timer showing electrical specifications.

10. Warranty and Support

For warranty information or technical support, please refer to the documentation provided at the point of purchase or contact your retailer. Keep your proof of purchase for any warranty claims.