Inefala 2+64G Radio User Manual for Chevrolet Aveo (2006-2012)

Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your Inefala 2+64G Android 15 CarPlay Stereo. This unit is specifically designed for Chevrolet Aveo models manufactured between 2006 and 2012. It features a 9-inch touchscreen, Android 15 operating system, 2GB RAM, 64GB ROM, wireless CarPlay and Android Auto, Bluetooth, GPS navigation, DSP audio processing, and supports a backup camera.

Setup and Installation

Applicable Models

This unit is compatible with Chevrolet Aveo models from 2006, 2007, 2008, 2009, 2010, 2011, and 2012. Please verify your vehicle's power cable port before installation.

Package Contents

The package includes the following items:

• 1 x Inefala Android Radio for Chevrolet Aveo (2006-2012)
• 2 x Power Cables
• 1 x RCA Harness
• 1 x GPS Antenna
• 1 x AHD Backup Camera
• 1 x Rear Camera Input Cable
• 1 x External Microphone
• 2 x USB Cables
• 1 x Installation Tool & Accessories

Pre-Installation Check

Before proceeding with the full installation, perform a quick test:

1. Combine the red and yellow wires of the car stereo and connect them to the positive pole of a 12V battery.
2. Connect the black wire to the negative pole of the battery.
3. After 2 seconds, check if the car stereo screen lights up. If it does, the device is functioning normally. If not, recheck the wiring and ensure proper connections before attempting full installation in the vehicle.

Wiring and Port Details

Familiarize yourself with the ports on the back of the unit and the corresponding wiring harness connections.

Port Identification:

• 1. Power Cable: Main power connection.
• 2. RCA Cable: For audio/video input/output.
• 3. USB Cable: For USB devices and wired connectivity.
• 4. Camera Input: For connecting the backup camera.
• 5. GPS Antenna: For navigation functionality.
• 6. 8Pin Canbus Serial Port (Optional): For vehicles with CANBUS systems.

Reversing Camera Wiring

Follow these steps to connect the backup camera:

1. Connect Cable 1 and Cable 5 to the positive pole of the car's reversing light cable.
2. Connect Cable 2 to the negative pole of the car's reversing light cable.
3. Connect Cable 3 and Cable 4 to the reverse trigger wire of the power cable (labeled 'Reverse/Back'). If your vehicle does not have this wire, you do not need to connect it. If the camera does not function after installation, try pulling out and reconnecting this wire.

Important Tip: The reversing input must be plugged in even if the reversing camera is not used. Failure to do so may affect your WiFi and Bluetooth signals.

Installation Tips

• Always double-check that the power cable port provided matches the port in your car.
• It is not necessary to connect all sockets if they do not fit. The harness may contain spare sockets for different car models.
• If the wiring harness is incorrect, or if accessories are missing or damaged, please contact customer support for assistance.

Operating Instructions

Power On/Off

The unit powers on automatically when the vehicle's ignition is turned on. To power off, turn off the vehicle's ignition. A short press of the power button on the unit typically puts it into standby mode, while a long press may fully power it off.

Touchscreen Interface

The 9-inch capacitive touchscreen allows for intuitive control. Navigate through menus and applications by tapping, swiping, and pinching gestures.

CarPlay & Android Auto & Mirror Link

The unit supports both wireless and wired connections for Apple CarPlay and Android Auto, as well as Mirror Link functionality.

Wireless Connection:

1. Turn on your phone's Bluetooth and pair it with the car stereo's Bluetooth.
2. Open the 'Zlink' application on the car stereo, and it should automatically connect.

Wired Connection:

1. Connect your mobile phone to the car stereo via the original USB cable.
2. Open the 'Zlink' application, and it should automatically connect.

Note: Some Huawei and Samsung phones may not support Android Auto or Mirror Link. Your phone must support Google Services and have the 'Android Auto' app installed for full functionality.

GPS Navigation

The unit includes both online and offline navigation capabilities. You can download map data for offline use or connect to a WiFi hotspot for real-time traffic updates and online navigation services.

WiFi Hotspot Connection

Connect the unit to a WiFi hotspot (e.g., from your smartphone) to access online features, download applications, browse the internet, and stream content.

Bluetooth & FM/RDS Radio

The built-in Bluetooth module supports hands-free calling, phone book synchronization, and wireless music playback from your paired smartphone. The FM/RDS radio allows you to preset up to 18 stations and provides channel broadcast information, weather forecasts, and real-time road conditions.

Digital Sound Processor (DSP)

The integrated Digital Signal Processing (DSP) feature offers a 32-band equalizer, allowing you to fine-tune the audio output for an optimized listening experience.

Split Screen Function

The split-screen feature enables you to run and view two applications concurrently, such as navigation and music playback, enhancing multitasking capabilities.

Desktop Themes

The unit offers 26 different desktop themes. To switch between themes, long-press on any blank space on the desktop and select your preferred theme.

Steering Wheel Control

The unit supports steering wheel controls for convenient operation.

• Without CANBUS Box: Activation of steering wheel controls requires key learning in the unit's settings menu.
• With CANBUS Box:
  1. Connect the 20-pin white port in the power cable to the CANBUS module itself, and the remaining 8-pin white port to the corresponding port on the back of the radio.
  2. Match the car model in the CANBUS settings. Path: Settings -> Factory Setup (Password 000000) -> Can Settings.

Voice Control

Utilize Siri or Google Voice Assistant for hands-free commands, including playing music, opening navigation, making calls, sending messages, and more.

Backup Camera

The included AHD backup camera provides a clear, wide-angle, waterproof, HD, and night vision view, automatically activating when the vehicle is in reverse gear for enhanced safety.

Interface Demonstration Video

Maintenance

To ensure the longevity and optimal performance of your Inefala car stereo, follow these general maintenance guidelines:

• Cleaning the Screen: Use a soft, lint-free cloth to gently wipe the touchscreen. For stubborn smudges, slightly dampen the cloth with water or a screen-safe cleaner. Avoid harsh chemicals or abrasive materials.
• Software Updates: Periodically check for software updates to ensure you have the latest features and security patches. Updates can typically be found in the system settings or through the manufacturer's website.
• Environmental Conditions: Avoid exposing the unit to extreme temperatures, direct sunlight for prolonged periods, or excessive moisture.
• Cable Connections: Ensure all cables are securely connected. Loose connections can lead to intermittent functionality.

Troubleshooting

Common Issues

• Unit Does Not Power On:
  • Check all power connections, ensuring the red and yellow wires are connected to a 12V positive source and the black wire to ground.
  • Verify the vehicle's fuse for the stereo system.
• Incorrect Wiring Harness: If the provided power cord/wiring harness does not fit your Chevrolet Aveo, please contact customer support for a compatible replacement. It is crucial to check the power cable port on the product detail page before purchasing to avoid this issue.
• No Sound:
  • Check speaker connections and ensure the volume is not muted or set too low.
  • Verify audio output settings in the system menu.
• GPS Signal Loss: Ensure the GPS antenna is properly installed and has a clear line of sight to the sky.
• Bluetooth/WiFi Connectivity Issues:
  • Ensure the reversing input is connected, even if a camera is not used, as it can affect wireless signals.
  • Restart the unit and your phone.
  • Clear Bluetooth/WiFi cache on both devices.
• CarPlay/Android Auto Not Connecting:
  • For wired connections, use the original USB cable.
  • Ensure the 'Zlink' app is open on the stereo.
  • Verify your phone's compatibility and that it has Google Services and the Android Auto app installed (for Android Auto).

Resetting the Device

If you encounter persistent issues, a factory reset may resolve them. This will erase all user data and settings. Consult the system settings for the 'Factory Reset' option.

Specifications

Warranty Information

The Inefala 2+64G Radio comes with a 1 Year Warranty from the date of purchase. Please retain your proof of purchase for warranty claims. This warranty covers manufacturing defects and malfunctions under normal use.

Customer Support

For any questions, technical assistance, or issues with your product, please contact Inefala customer support.

How to Reach Us:

1. Go to the product page on Amazon.
2. Click on 'Inefala Direct' (the seller's name).
3. Click 'Ask a question'.
4. Describe your issue and attach any relevant pictures or videos to help our support team assist you efficiently.

Alternatively, you can reach us directly via email:

Email: inefalaservices@163.com

Our customer service team is available 24 hours a day, 7 days a week, excluding holidays, and aims to respond within 24 hours.