1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Heat Storm 3000 Watt Electric In-Wall Heater with Wi-Fi. This heater is designed to provide efficient and customizable heating for indoor spaces. Please read this manual thoroughly before installation and use to ensure safe and proper operation.
2. Important Safety Information
Always follow basic safety precautions when using electrical appliances to reduce the risk of fire, electric shock, and injury to persons.
- Electrical Requirements: This heater operates on 240 Volts and requires a 25 Amp circuit. Ensure your electrical system can support these requirements before installation. All wiring must comply with local electrical codes.
- Overheat Protection: The heater is equipped with an automatic overheat protection system that will shut off the unit if it reaches an unsafe temperature. If this occurs, unplug the unit (if accessible) or turn off the circuit breaker and allow it to cool before attempting to restart.
- Child Lock: The heater features a child lock function to prevent accidental changes to settings. Refer to the operation section for instructions on activating and deactivating this feature.
- Placement: Do not install the heater near water sources, in direct sunlight, or in areas with high humidity. Maintain adequate clearance from combustible materials.
- Maintenance: Disconnect power before performing any maintenance or cleaning. Do not insert foreign objects into the heater vents.
- Professional Installation: Due to the in-wall design and electrical requirements, professional installation by a qualified electrician is highly recommended.
3. Package Contents
Verify that all items are present in the package:
- Heat Storm In-Wall Heater Unit
- Remote Control (1 C battery included)
- Wall Can (for in-wall installation)
- User Manual (this document)
4. Setup & Installation
The Heat Storm In-Wall Heater is designed for permanent installation within a wall. It requires a dedicated 240V, 25A electrical circuit. It is strongly recommended that installation be performed by a licensed electrician.
4.1 Dimensions
Figure 4.1: Heater dimensions. The unit measures approximately 4.92 inches deep, 15.51 inches wide, and 19.88 inches high.
4.2 Installation Overview
The heater unit fits into a wall can, which is then secured within a wall cavity. Proper electrical wiring is essential for safe operation.
Figure 4.2: Exploded view illustrating the heater unit, wall can, and mounting frame for in-wall installation.
- Select Location: Choose an indoor wall location that can accommodate the heater's dimensions and is away from water sources or flammable materials. Ensure there is sufficient clearance around the unit for proper airflow.
- Prepare Wall Opening: Create an opening in the wall suitable for the included wall can.
- Install Wall Can: Secure the wall can within the prepared opening according to local building codes.
- Electrical Connection: Connect the heater to a dedicated 240V, 25A circuit. All wiring must be performed by a qualified electrician and adhere to all national and local electrical codes.
- Mount Heater: Once electrical connections are secure, slide the heater unit into the wall can and secure it in place.
5. Operation
The Heat Storm In-Wall Heater features a digital thermostat and an intuitive touch screen display for easy control. A remote control is also included for convenience.
5.1 Control Panel Overview
Figure 5.1: Front view of the heater, highlighting the integrated digital display and touch controls. The display shows the current temperature and settings.
- Power Button: Turns the heater ON or OFF.
- Temperature Adjustment: Use the '+' and '-' buttons to set the desired temperature between 40°F (4°C) and 99°F (37°C).
- Mode Selection: Cycle through available heating modes (e.g., 3000 Watt, 1500 Watt). The heater offers selectable output for energy efficiency.
- LED Brightness: Adjust the brightness of the LED display.
- Child Lock: Activate or deactivate the child lock feature to prevent unauthorized changes to settings. Consult the full user manual for specific button combinations to engage/disengage.
5.2 Remote Control
The included remote control provides convenient access to most heater functions from a distance. Ensure the included C battery is installed correctly.
5.3 Typical Usage Environment
Figure 5.2: The in-wall heater seamlessly integrated into a room, demonstrating its compact and discreet design.
Figure 5.3: Noise level comparison graphic, indicating the heater operates quietly, comparable to a whisper or light rain, making it suitable for various indoor environments.
6. Wi-Fi Connectivity
The built-in Wi-Fi functionality allows you to control your Heat Storm heater from your smartphone or tablet, set custom heating schedules, and monitor its status from anywhere.
6.1 Connecting to Wi-Fi
Download the official Heat Storm app from your device's app store. Follow the in-app instructions to connect your heater to your home Wi-Fi network. This typically involves:
- Ensuring your heater is powered on.
- Placing your mobile device near the heater during the initial setup.
- Entering your Wi-Fi network credentials into the app.
6.2 App Features
Figure 6.1: Screenshot of the mobile application, demonstrating the intuitive interface for adjusting temperature, setting schedules, and managing heater settings remotely.
- Remote Control: Turn the heater ON/OFF, adjust temperature, and change modes from anywhere with an internet connection.
- Custom Schedules: Create personalized heating schedules for different days and times to optimize comfort and energy savings.
- Temperature Monitoring: View the current room temperature and heater status.
- Settings Management: Control features like LED brightness, child lock, and sound settings directly from the app.
7. Maintenance
Regular maintenance ensures optimal performance and longevity of your heater. Always disconnect power to the unit at the circuit breaker before performing any maintenance.
- Cleaning: Use a soft, damp cloth to wipe the exterior surfaces of the heater. Do not use abrasive cleaners or solvents. Ensure no liquid enters the vents or control panel.
- Dust Removal: Periodically use a vacuum cleaner with a brush attachment to gently remove dust from the air intake and exhaust vents. This helps maintain efficient airflow.
- Storage: If storing the heater for an extended period, ensure it is clean and dry.
8. Troubleshooting
If you experience issues with your heater, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Heater does not turn on. | No power, circuit breaker tripped, overheat protection activated. | Check power supply and circuit breaker. Allow unit to cool if overheat protection was triggered. Ensure proper installation. |
| Heater not producing enough heat. | Incorrect temperature setting, low power mode, obstructed vents. | Increase desired temperature. Ensure heater is set to 3000 Watt mode if maximum heat is desired. Clear any obstructions from vents. |
| Wi-Fi connection issues. | Incorrect Wi-Fi password, router too far, network interference. | Verify Wi-Fi password. Move router closer or use a Wi-Fi extender. Restart heater and router. Re-attempt connection via the app. |
| Child lock engaged. | Controls are unresponsive. | Refer to the full user manual or app for instructions on how to disengage the child lock. |
If the problem persists after attempting these solutions, please contact Heat Storm customer support.
9. Specifications
| Feature | Detail |
|---|---|
| Brand | Heat Storm |
| Model Number | HS-3000-WALL-R |
| Form Factor | In-Wall |
| Color | White |
| Indoor/Outdoor Usage | Indoor |
| Product Dimensions | 4.92"D x 15.51"W x 19.88"H |
| Item Weight | 16.97 pounds |
| Mounting Type | Wall Mount |
| Fuel Type | Electric |
| Voltage | 240 Volts |
| Amperage | 25 Amps |
| Wattage Output | Selectable 3000 Watt or 1500 Watt |
| Min Temperature Setting | 40 Degrees Fahrenheit |
| Max Temperature Setting | 99 Degrees Fahrenheit |
| Special Features | Built-in Wi-Fi, Digital Thermostat, Adjustable LED Brightness, Intuitive Touch Screen, Child Lock, Overheat Protection |
| Included Components | Heater, Remote, User Manual, Wall Can |
| Batteries Required | Yes (1 C battery for remote, included) |
| Heating Coverage | 301 (Primary) - 1000 (Secondary) sq.ft. |
| Burner Type | Alloy metal heating wire |
| UPC | 810109088669 |
10. Warranty & Support
For specific warranty information, please refer to the warranty card included with your product or visit the official Heat Storm website. If you require technical assistance, troubleshooting beyond this manual, or have questions regarding your product, please contact Heat Storm customer support.
Heat Storm Customer Support:
- Website: www.heatstorm.com
- Phone: Refer to the product packaging or official website for contact numbers.