1. Safety Information
Please read all safety instructions carefully before operating the Caso Design 10718 Wine Cellar. Retain this manual for future reference.
- Do not install on uneven surfaces. Ensure the unit is level and stable before use.
- Do not exceed the weight capacity of 24 bottles.
- Unplug the unit before cleaning or servicing.
- Keep the area around the unit clear of flammable materials.
- Do not operate if damaged or malfunctioning.
- Always follow manufacturer's instructions for safe use and maintenance.
2. Product Overview
The Caso Design 10718 is a 24-bottle wine cellar designed for optimal wine storage. Its elegant black housing and freestanding design allow for flexible placement within your home. This unit features advanced compressor technology for precise temperature control.
Figure 2.1: Front view of the Caso Design 10718 24-Bottle Wine Cellar, showcasing its sleek design and digital temperature controls.
Key Features:
- Dual-Zone Temperature Control: Independently set temperatures for red and white wines, ranging from 41°F to 64°F.
- Wi-Fi Enabled Technology: Monitor inventory and control temperatures remotely via a dedicated app, receiving alerts for changes.
- Optimal Air Circulation: Ultra-quiet fans ensure consistent temperature distribution with less than 1°F difference throughout the cooler.
- Vibration Reduction: Specially designed feet minimize vibrations, providing a stable environment for wine aging.
- Premium Beechwood Shelves: Six high-quality beechwood shelves offer secure and aesthetically pleasing storage.
- UV Filtered Glass Door: 3-layered insulating glass with a UV filter protects wine from harmful light.
- Switchable Interior Lighting: Internal lighting can be controlled as needed.
Figure 2.2: Overview of key features, including dual-zone temperature control and quiet operation for optimal wine preservation.
3. Setup and Installation
Unpacking:
- Carefully remove the wine cellar from its packaging.
- Inspect the unit for any shipping damage. If damage is found, do not plug in the unit and contact your retailer immediately.
- Remove all internal packing materials, including tape and protective films.
Placement:
- Place the wine cellar on a flat, stable, and level surface. Uneven surfaces can affect performance and stability.
- Ensure adequate ventilation around the unit. Allow at least 4 inches (10 cm) of space at the back and sides for proper air circulation.
- Avoid placing the unit in direct sunlight or near heat sources such as ovens, radiators, or heating vents, as this can impact cooling efficiency.
- The unit is designed for freestanding installation. Do not enclose it in cabinetry without ensuring proper ventilation.
Figure 3.1: Example of appropriate placement in a living space, ensuring proper ventilation and stability.
Electrical Connection:
- Before plugging in, allow the unit to stand upright for at least 2-4 hours to allow the refrigerant to settle.
- Connect the wine cellar to a dedicated, grounded 115 Volt AC outlet. Do not use extension cords or adapter plugs.
- Ensure the power cord is not pinched or damaged.
4. Operating Instructions
Loading Wine Bottles:
The wine cellar features six beechwood shelves designed to hold standard wine bottles. Ensure bottles are placed securely to prevent rolling or damage.
Figure 4.1: Wine bottles correctly placed on the beechwood shelves within the cellar.
Temperature Control:
The Caso Design 10718 features dual-zone temperature control, allowing you to set different temperatures for the upper and lower sections.
- Setting Temperature: Use the up and down arrow buttons on the control panel for each zone to adjust the desired temperature. The display will show the set temperature.
- Temperature Range: The upper and lower zones can be set between 41°F (5°C) and 64°F (18°C).
- Recommended Temperatures:
- Red Wines: 55-64°F (13-18°C)
- White Wines: 45-54°F (7-12°C)
Wi-Fi Smart Control (Caso Control App):
This wine cellar is equipped with Wi-Fi connectivity, allowing remote monitoring and control via the Caso Control App.
- Download the App: Download the 'Caso Control' app from the App Store (iOS) or Google Play Store (Android).
- Connect to Wi-Fi: Follow the in-app instructions to connect your wine cellar to your home Wi-Fi network.
- Remote Control: Once connected, you can monitor current temperatures, adjust settings, and receive alerts for any temperature changes directly on your smartphone.
Figure 4.2: The Caso Control App interface, demonstrating remote temperature management and alert features. Download the app at www.casocontrol.de/en/.
Interior Lighting:
The interior LED lighting can be switched on or off using the light button on the control panel or via the Caso Control App.
5. Maintenance
Cleaning the Wine Cellar:
- Disconnect Power: Always unplug the wine cellar from the power outlet before cleaning.
- Interior Cleaning: Wipe the interior surfaces with a soft cloth dampened with a mild detergent solution. Avoid abrasive cleaners or solvents.
- Exterior Cleaning: Clean the exterior with a soft, damp cloth. For the glass door, use a glass cleaner.
- Shelves: The beechwood shelves can be removed and wiped clean with a damp cloth. Ensure they are completely dry before returning them to the unit.
- Dusting: Periodically dust the back and sides of the unit to ensure proper ventilation and cooling efficiency.
Defrosting:
The Caso Design 10718 features manual defrost. If ice buildup occurs, unplug the unit and allow the ice to melt naturally. Place towels at the bottom to absorb water. Once defrosted, clean and dry the interior before plugging it back in.
6. Troubleshooting Guide
Before contacting customer service, please refer to the following troubleshooting guide for common issues.
| Problem | Possible Cause | Solution |
|---|---|---|
| Wine cellar does not operate. | No power to the unit. Power cord not properly plugged in. Circuit breaker tripped. | Check if the unit is plugged into a live outlet. Ensure the power cord is securely connected. Reset the circuit breaker. |
| Unit is not cooling sufficiently. | Temperature setting is too high. Door is not closed properly. Excessive door openings. Poor ventilation. Ambient room temperature is too high. | Adjust temperature to a lower setting. Ensure the door is fully closed and sealed. Minimize door openings. Ensure adequate space around the unit for air circulation. Move the unit to a cooler location if possible. |
| Excessive noise. | Unit is not level. Objects touching the back of the unit. Normal compressor operation. | Adjust leveling feet to ensure the unit is stable. Move the unit away from walls or other objects. Some operational noise from the compressor and fans is normal. |
| Water on the floor inside the unit. | Drainage hole is blocked. Excessive humidity. | Check and clear the drainage hole at the back of the interior. Ensure the door seal is intact and the door is closed properly. |
| Wi-Fi connection issues. | Incorrect Wi-Fi password. Router too far from the unit. App not updated. | Re-enter Wi-Fi password in the app. Move the unit closer to the router or use a Wi-Fi extender. Update the Caso Control App to the latest version. |
7. Technical Specifications
Detailed specifications for the Caso Design 10718 24-Bottle Wine Cellar.
| Feature | Specification |
|---|---|
| Model Number | 10718 |
| Brand | Caso Design |
| Capacity | 24 Bottles (68 Liters) |
| Color | Black |
| Product Dimensions (D x W x H) | 23.23" x 15.55" x 34.45" (59 cm x 39.5 cm x 87.5 cm) |
| Item Weight | 81.6 pounds (37 kg) |
| Temperature Range | 41°F - 64°F (5°C - 18°C) |
| Installation Type | Freestanding |
| Shelves | 6, Beechwood |
| Voltage | 115 Volts |
| Annual Energy Consumption | 150 Watts |
| Defrost Type | Manual |
| Special Features | Digital Temperature Control, Wi-Fi Enabled |
| Included Components | Wine Safe |
8. Warranty and Customer Support
Warranty Information:
Caso Design products are manufactured to high-quality standards. For specific warranty details, including coverage period and terms, please refer to the warranty card included with your product or visit the official Caso Design website. Keep your proof of purchase for warranty claims.
Customer Support:
If you encounter any issues not covered in this manual or require further assistance, please contact Caso Design customer support. Have your model number (10718) and purchase date ready when contacting support.
- Online Support: Visit the Caso Design official website for FAQs, support resources, and contact forms.
- Phone Support: Refer to your product documentation or the Caso Design website for regional customer service phone numbers.
