1. Introduction
This manual provides detailed instructions for the safe and effective use of your Godox iA32 Mini Flash Speedlight. Please read this manual thoroughly before using the product to ensure proper operation and to prevent damage.
2. Safety Information
- Do not disassemble or modify the flash unit.
- Keep the unit dry. Do not handle with wet hands or immerse in water.
- Do not use the flash in the presence of flammable gases or liquids.
- Keep out of reach of children.
- Remove batteries when the unit is not in use for extended periods.
- Avoid direct eye exposure to the flash, especially at close range, as it may impair vision.
3. Package Contents
Verify that all items are present in your package:
- Flash Body (x1)
- Storage Pouch (x1)
- Cleaning Cloth (x1)
Image: The Godox iA32 flash body, a grey storage pouch, and a green cleaning cloth, illustrating the package contents.
4. Product Overview
The Godox iA32 is a compact mini flash speedlight designed for various camera systems. It features a single contact hot shoe for broad compatibility and an adjustable flash head for flexible lighting options.
Image: A detailed view of the Godox iA32 Mini Flash Speedlight, highlighting its compact form factor.
5. Setup
5.1 Battery Installation
The iA32 flash is powered by two AA batteries (not included). Follow these steps to install them:
- Locate the battery compartment on the side of the flash unit.
- Open the battery compartment cover.
- Insert two AA batteries, ensuring correct polarity (+/-).
- Close the battery compartment cover securely.
Image: Two Godox iA32 flash units are shown alongside two AA batteries, indicating where batteries are inserted.
5.2 Mounting the Flash on Your Camera
The iA32 features a single contact hot shoe for mounting on compatible cameras.
- Ensure your camera is turned off.
- Slide the flash unit's hot shoe mount into your camera's hot shoe slot until it clicks into place.
- Tighten the locking mechanism (if present) on the flash or camera to secure the unit.
Image: A hand demonstrates attaching the Godox iA32 flash to a camera's hot shoe, highlighting the single contact design.
Image: A compatibility chart showing the Godox iA32's single contact hot shoe and its compatibility with hot shoes from Canon, Nikon, Pentax, Sony, Fuji, and Olympus cameras.
6. Operating Instructions
6.1 Power On/Off
Press and hold the power button (usually marked with a power symbol) to turn the flash unit on or off.
6.2 Mode Selection (Auto/Manual)
The iA32 offers both automatic and manual flash modes. Use the 'MOD' button to switch between modes.
- Auto Mode: In this mode, you can set the ISO and aperture values on the flash. The recommended shooting distance will be displayed on the panel.
- Manual Mode: This mode allows you to manually adjust the flash power output.
Image: A close-up of the Godox iA32's display, showing the 'AUTO' indicator and settings for ISO and aperture, along with recommended shooting distance.
6.3 Adjusting Power Levels (Manual Mode)
In Manual Mode, you can select from 8 power output levels, ranging from 1/128 to full power (1/1), with 1/3-stop increments. Use the '+' and '-' buttons to adjust the power level.
Image: A portrait shot, demonstrating the impact of adjustable power levels in manual flash mode.
6.4 Adjusting Flash Head Angle
The flash head assembly allows for easy angle adjustments from -7° to 90°. This is controlled via the side dial. This feature enables bounce flash effects for more varied lighting options.
Image: A hand rotating the flash head of the Godox iA32, illustrating the adjustable angle mechanism.
7. Maintenance
- Cleaning: Use the provided cleaning cloth or a soft, dry cloth to wipe the flash unit. Do not use harsh chemicals or abrasive materials.
- Storage: Store the flash in a dry, cool place, away from direct sunlight and moisture. Remove batteries if storing for an extended period.
- Handling: Avoid dropping or subjecting the flash to strong impacts.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Flash does not fire. | Low or dead batteries. Incorrect mounting. Flash not powered on. | Replace batteries. Re-mount flash securely. Turn on flash unit. |
| Flash output is too weak/strong. | Incorrect power level setting (Manual Mode). Incorrect ISO/aperture (Auto Mode). | Adjust power level in Manual Mode. Verify ISO/aperture settings in Auto Mode. |
| Flash head does not adjust smoothly. | Dust or debris in the mechanism. | Gently clean around the rotating mechanism. Do not force adjustment. |
9. Specifications
| Feature | Detail |
|---|---|
| Model | iA32 |
| Brand | GODOX |
| Compatible Mounts | Standard Hot Shoe |
| Flash Type | External |
| Sync Speed | Up to 1/250s |
| Connectivity Technology | Wired (Hot Shoe), Optical Pulse (Wireless) |
| Power Source | 2x AA Batteries (not included) |
| Recycling Time | Approx. 2.5 seconds |
| Flashes at Full Power | Approx. 490 (with fresh AA batteries) |
| Power Output Levels | 8 levels (1/128 to 1/1) in 1/3-stop increments |
| Flash Head Angle | -7° to 90° |
10. Warranty and Support
For warranty information and technical support, please refer to the warranty card included with your product or visit the official GODOX website. Keep your purchase receipt as proof of purchase for warranty claims.
