1. Product Overview
The PATPET P Collar 940 Remote Trainer is designed to assist in dog training with a range of up to 1.2 miles. It features multiple training modes and is suitable for dogs weighing 15 to 150 pounds. The collar is waterproof, making it suitable for various environments, including those with water.
Image: Overview of PATPET P Collar 940 Remote Trainer highlighting key features like 101 levels, 1.2 mile range, IPX7 waterproofing, safety, and rechargeable batteries.
2. Setup Guide
2.1 Package Contents
Before starting, ensure all components are present in the package:
- Remote Transmitter
- Receiver Collar
- Charging Cable
- Power Adapter
- Test Light Tool
- Lanyard
- User Manual
- Training Whistle (if included in specific kit)
- Dog Clicker (if included in specific kit)
- Training Bag (if included in specific kit)
Image: Components of the PATPET P Collar 940 Remote Trainer kit, showing the remote, receiver collar, and various accessories.
2.2 Charging the Devices
Both the remote transmitter and the receiver collar are rechargeable. Use the provided charging cable and power adapter to charge both devices simultaneously. A full charge typically takes approximately 2 hours and provides up to 12 days of standby time.
Image: The remote transmitter and receiver collar connected to the charging cable and power adapter.
2.3 Fitting the Receiver Collar
Proper fit of the receiver collar is crucial for effective and safe operation. The collar should be snug enough to allow the contact points to touch the dog's skin, but not so tight as to restrict breathing or cause discomfort. You should be able to fit two fingers snugly under the collar.
Image: A dog wearing the PATPET P Collar 940 receiver collar, demonstrating proper fit around the neck.
3. Operating Instructions
3.1 Remote Transmitter Controls
The remote transmitter features several controls for different training modes and settings:
- On/Off Switch: Located on the side/top of the remote.
- Channel Select Button: To switch between training multiple dogs (up to 2 channels).
- LED Indicator: Provides status information.
- Vibration Button: Activates vibration mode (levels 1-8).
- Beep Button: Activates audible tone mode.
- Static Stimulation Button: Activates static stimulation mode (levels 1-99).
- Intensity Dial: Rotate right for "+" to increase intensity, rotate left for "-" to decrease intensity.
Image: Detailed view of the PATPET P Collar 940 Remote Trainer, labeling its various buttons and controls for different functions.
3.2 Training Modes
The P Collar 940 offers three distinct training modes:
- Beep Mode: Delivers an audible tone to the receiver collar. Useful for initial commands or as a warning.
- Vibration Mode (1-8 Levels): Provides a non-harmful vibration. Intensity can be adjusted.
- Static Stimulation Mode (1-99 Levels): Delivers a static pulse. Intensity can be adjusted from mild to strong. Use with caution and at the lowest effective level.
Image: Illustration of the three training modes (Beep, Vibration, Static Stimulation) available on the PATPET P Collar 940 Remote Trainer.
3.3 Remote Control Range
The remote trainer has an effective control range of up to 1.2 miles (approximately 2 kilometers) in open areas. Environmental factors such as terrain, buildings, and electromagnetic interference can affect the actual range.
Image: A hand holding the PATPET P Collar 940 remote, with a dog in the distance, illustrating the 1.2-mile remote control range.
3.4 Video Demonstration
Video: A brief demonstration of the PATPET Dog Training Collar 940, showcasing its features and use. This video is provided by the seller.
4. Maintenance
4.1 Cleaning
Regularly clean the receiver collar and remote transmitter with a damp cloth. Ensure the contact points on the collar are free from dirt and debris to maintain proper function. Do not use harsh chemicals or abrasive materials.
4.2 Battery Care
To prolong battery life, avoid fully discharging the devices frequently. Charge them when the battery indicator shows low power. Store the devices in a cool, dry place when not in use for extended periods.
4.3 Waterproofing
The receiver collar is IPX7 waterproof, meaning it can withstand immersion in water up to 1 meter for 30 minutes. However, ensure the charging port cover is securely closed before exposing the collar to water. The remote transmitter is not designed for immersion.
5. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Collar not responding to remote | Low battery on either device; devices not paired; out of range. | Charge both devices; re-pair the remote and collar; ensure devices are within 1.2-mile range. |
| No static stimulation | Collar not fitted correctly; contact points not touching skin; intensity level too low. | Adjust collar fit; ensure contact points are making good contact; increase static stimulation level gradually. |
| Shortened range | Environmental interference; low battery. | Move to an open area; ensure both devices are fully charged. |
6. Product Specifications
| Feature | Detail |
|---|---|
| Model Number | P Collar 940 |
| Control Range | Up to 1.2 miles |
| Training Modes | Beep, Vibration (1-8 levels), Static Stimulation (1-99 levels) |
| Water Resistance Level | IPX7 (Receiver Collar) |
| Battery Type | Lithium Ion (rechargeable) |
| Battery Life (Standby) | Up to 12 days (after 2-hour charge) |
| Compatible Dog Weight | 15 to 150 pounds |
| Number of Channels | 2 |
| Item Weight | 4.8 ounces |
| Manufacturer | Shenzhen Patpet Technology Co.,Ltd |
7. Warranty & Support
7.1 Manufacturer's Warranty
This PATPET P Collar 940 Remote Trainer comes with a 2-Year Manufacturer Warranty. Please retain your proof of purchase for warranty claims. The warranty covers defects in materials and workmanship under normal use.
7.2 Customer Support
For technical assistance, troubleshooting, or warranty inquiries, please contact PATPET customer support. Refer to the contact information provided in your product packaging or visit the official PATPET website.
