ROBUD WRP27 White Wooden Baby Doll High Chair Instruction Manual

1. Safety Information

Please read all instructions carefully before assembly and use. Keep this manual for future reference.

• Recommended Age: This product is suitable for children aged 3 years and up.
• Adult Supervision: Always ensure adult supervision during play to prevent accidents.
• Choking Hazard: Keep small parts and assembly hardware away from young children.
• Stability: Ensure the high chair is placed on a flat, stable surface during use.
• Weight Limit: This high chair is designed for dolls up to 20 inches in height. It is not intended for real infants or pets.

2. Package Contents

Verify that all components are present before beginning assembly:

• Wooden High Chair Frame (various pieces)
• Seat Panel
• Movable Tabletop (Tray)
• Footrest
• Fabric Seat Belt
• Assembly Hardware (screws, nuts, Allen wrench)

Figure 2.1: Key components of the ROBUD Baby Doll High Chair.

3. Setup and Assembly

The ROBUD Baby Doll High Chair is designed for easy assembly. No complicated tools are required beyond what is provided.

1. Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, flat surface. Verify against the package contents list.
2. Assemble Side Frames: Attach the horizontal support bars to the vertical side panels using the provided screws and Allen wrench. Ensure all connections are secure.
3. Install Seat Panel: Slide the seat panel into the designated grooves on the side frames.
4. Attach Backrest: Secure the backrest panel to the rear of the side frames using screws.
5. Install Footrest: Insert the footrest into the lower slots on the side frames and secure with screws.
6. Attach Tabletop Rails: Fasten the rails for the movable tabletop to the front of the side frames.
7. Insert Tabletop: Slide the movable tabletop into the installed rails.
8. Secure Seat Belt: Thread the fabric seat belt through the slots in the seat panel and secure it according to the instructions provided with the belt.

Figure 3.1: Assembling the tabletop and placing a doll.

Figure 3.2: The fully assembled high chair in use.

4. Operating Instructions

This high chair is designed for interactive pretend play with dolls.

• Placing a Doll: Gently place your doll into the seat. The chair is suitable for dolls up to 20 inches tall.
• Using the Seat Belt: Fasten the fabric seat belt around the doll to keep it securely in place during play.
• Adjusting the Tabletop: The tabletop can be easily slid forward and backward, or removed completely, to facilitate placing and removing dolls or for different play scenarios.
• Footrest: The integrated footrest provides a realistic and comfortable experience for the doll.

Figure 4.1: Doll secured in the high chair with the tabletop in place.

5. Maintenance and Care

To ensure the longevity and appearance of your ROBUD Baby Doll High Chair, follow these care guidelines:

• Cleaning: Wipe the wooden surfaces with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals that could damage the finish.
• Drying: Ensure the chair is completely dry after cleaning to prevent warping or damage to the wood.
• Storage: Store the high chair in a dry environment, away from direct sunlight or extreme temperatures.
• Inspections: Periodically check all screws and connections to ensure they remain tight. Tighten if necessary.
• Material: Crafted entirely from wood, this high chair offers superior strength and durability.

Figure 5.1: Illustration of the quality wood and stable wooden frame construction.

6. Troubleshooting

If you encounter any issues with your high chair, please refer to the following common solutions:

• Tabletop is Loose or Falls Off: Ensure the tabletop is correctly seated within its rails. If it frequently detaches, check the rails for any damage or misalignment.
• Chair Feels Unstable: Verify that all assembly screws are securely tightened. Place the chair on a level surface.
• Difficulty Placing Doll: Ensure the tabletop is slid forward or removed to provide ample space for the doll.

If problems persist, please contact ROBUD customer support for assistance.

7. Specifications

Figure 7.1: Product dimensions.

8. Warranty and Support

ROBUD products are manufactured with quality and durability in mind. For specific warranty details or customer support, please refer to the product packaging or contact ROBUD customer service directly through their official website or the retailer where the product was purchased.

For further assistance, please visit the ROBUD Store on Amazon.