1. Introduction
This manual provides essential information for the proper use and maintenance of your PATPET P Collar 940 Replacement Receiver Collar (Model: DC940R-BA1). This product is designed to replace the receiver unit and collar strap of an existing PATPET P Collar 940 dog training system. It is not a standalone training system and requires the original P Collar 940 remote transmitter for operation.
2. Product Overview
The PATPET P Collar 940 Replacement Receiver Collar includes the waterproof receiver unit and an adjustable nylon collar strap. The receiver is designed to deliver static, vibration, or tone corrections when activated by the compatible P Collar 940 remote transmitter.
Image 2.1: The PATPET P Collar 940 Replacement Receiver Collar, showing the receiver unit attached to the collar strap.
Image 2.2: A German Shepherd wearing a PATPET training collar, illustrating the product in use as part of the P Collar 940 system.
Image 2.3: A German Shepherd running through water, highlighting the IPX7 waterproof feature of the receiver collar.
3. Setup
3.1 Attaching the Receiver to the Collar Strap
- If the receiver unit is separate from the nylon strap, thread the strap through the loops on the back of the receiver.
- Ensure the receiver is centered on the strap and securely fastened.
3.2 Fitting the Collar on Your Dog
- Place the collar around your dog's neck, ensuring the contact points on the receiver touch the skin.
- Adjust the strap for a snug fit. You should be able to fit one or two fingers comfortably between the collar and your dog's neck. A loose fit can lead to inconsistent correction and irritation.
- Trim any excess strap length if necessary, and use the buckle to secure it.
3.3 Pairing with the Remote Transmitter
The replacement receiver collar must be paired with your existing PATPET P Collar 940 remote transmitter. Refer to your original P Collar 940 system manual for detailed pairing instructions. Typically, this involves turning on the receiver and remote, then pressing a pairing button or sequence on both devices.
Video 3.1: A brief overview of the PATPET Dog Training Collar 940 system, demonstrating its features and components. This video provides context for the replacement receiver collar's function within the full system.
4. Operating Principles
This replacement receiver collar functions as the receiving component of the PATPET P Collar 940 training system. It receives signals from the remote transmitter and delivers the selected correction (tone, vibration, or static stimulation) to your dog. Ensure the receiver is charged and properly paired with the remote for effective operation.
5. Maintenance and Care
5.1 Cleaning the Collar
- Regularly inspect the collar and receiver for dirt, debris, or wear.
- Clean the receiver and contact points with a damp cloth. Avoid using harsh chemicals or abrasive materials.
- The nylon strap can be hand-washed with mild soap and water. Ensure it is completely dry before reattaching the receiver.
5.2 Waterproofing
The receiver collar is IPX7 waterproof, meaning it can withstand immersion in water up to 1 meter for 30 minutes. This allows for use in various weather conditions and during water activities. Always ensure the charging port cover (if applicable) is securely closed to maintain waterproofing.
5.3 Battery Information
The receiver unit typically contains a rechargeable battery. Charge the receiver fully before first use and whenever the battery indicator shows low power. Use only the charger provided with your original PATPET P Collar 940 system. The product specifications mention that 1 AAA battery is included; this battery is likely for a test light or the remote transmitter, not the receiver collar itself. Refer to your original system manual for specific battery details of the remote.
6. Troubleshooting
- Collar not responding to remote: Ensure the receiver is charged and turned on. Verify that the receiver is properly paired with the remote transmitter. Check the remote's battery level.
- Inconsistent correction: Check the collar fit. It should be snug enough for the contact points to make consistent contact with your dog's skin. Ensure your dog's fur is not interfering with contact.
- Receiver not charging: Ensure the charging cable is securely connected to both the receiver and the power source. Use the original charger.
- Skin irritation: Remove the collar immediately if you notice any signs of skin irritation. Ensure the collar is not worn for more than 12 hours a day and reposition it frequently. Clean the contact points and your dog's neck regularly.
7. Specifications
| Feature | Detail |
|---|---|
| Model Number | DC940R-BA1 |
| Material | Nylon |
| Color | Black |
| Closure Type | Buckle |
| Target Species | Dog |
| Breed Recommendation | Medium, Large |
| Waterproof Rating | IPX7 (Receiver) |
| Included Components | Leash (as per product listing, may vary for replacement collar) |
| Batteries | 1 AAA battery required (included, likely for accessory/remote) |
8. Warranty Information
This PATPET P Collar 940 Replacement Receiver Collar is covered by a 2-Year Manufacturer Warranty. Please retain your proof of purchase for warranty claims. For detailed terms and conditions, refer to the warranty information provided with your original PATPET P Collar 940 system or contact customer support.
9. Customer Support
For further assistance, technical support, or warranty inquiries, please visit the official PATPET website or contact their customer service department. You can often find contact information on the PATPET brand store page on Amazon or within your original product packaging.
PATPET Official Store: Visit the PATPET Store on Amazon