ZJchao ZJchaocg1ok5hdsr-12

ZJchao Mini LED Spot Lights USB Showcase Display Light Instruction Manual

Product Overview

The ZJchao Mini LED Spot Lights are designed to illuminate display cabinets, jewelry cabinets, cupboards, entrance passageways, tables, and shelves. These compact lights enhance the visual appeal of your items and interior decor. The system features a 5V USB power supply with an adjustable brightness switch and a 6.6-foot wiring length for flexible installation.

Overview of ZJchao Mini LED Spot Lights components including three lights, a junction box, USB cable with switch, and power adapter.

Image: Overview of the ZJchao Mini LED Spot Lights system components.

Setup Instructions

Follow these steps to install your ZJchao Mini LED Spot Lights:

  1. Unpack Components: Carefully remove all items from the packaging. Verify that you have the junction box, USB cable with switch, three light units, three adhesive pads, and six screws.
  2. All components of the ZJchao Mini LED Spot Lights including lights, junction box, USB cable, adhesive pads, and screws.

    Image: All components included in the package.

  3. Choose Installation Method: You can choose between fixed open installation using screws or using the provided adhesive pads for a less permanent solution.
  4. Mount Lights:
    • Screw Installation: Position each light unit in your desired location. Use the provided screws to securely fix each light in place.
    • Adhesive Pad Installation: Clean the surface where you intend to mount the lights. Peel the backing from an adhesive pad and firmly press it onto the back of a light unit. Then, press the light unit onto the desired surface.
  5. Close-up of screws and adhesive pads for mounting the ZJchao Mini LED Spot Lights.

    Image: Screws and adhesive pads for mounting.

  6. Connect Lights to Junction Box: Plug the cables from each light unit into the corresponding ports on the junction box.
  7. Connect USB Cable: Connect the USB cable (with the dimmer switch) to the junction box.
  8. Power Connection: Plug the USB end of the cable into a 5V USB power source (e.g., USB wall adapter, power bank, computer USB port).

Operating Instructions

Once installed and connected to a power source, operate your ZJchao Mini LED Spot Lights as follows:

  • Turn On/Off: Use the inline switch on the USB cable to turn the lights on or off.
  • Adjust Brightness: The inline switch also allows for brightness adjustment. Press and hold the switch to cycle through different brightness levels until you reach your desired illumination.
A single ZJchao Mini LED Spot Light emitting warm light.

Image: A ZJchao Mini LED Spot Light in operation, showing warm light output.

Maintenance

To ensure the longevity and optimal performance of your ZJchao Mini LED Spot Lights, follow these simple maintenance guidelines:

  • Cleaning: Disconnect the power before cleaning. Use a soft, dry cloth to gently wipe the light units and cables. Avoid using abrasive cleaners or solvents, as these can damage the finish or electrical components.
  • Inspection: Periodically check all connections to ensure they are secure. Inspect cables for any signs of wear or damage.

Troubleshooting

If you encounter issues with your ZJchao Mini LED Spot Lights, refer to the following common problems and solutions:

  • Lights do not turn on:
    • Ensure the USB cable is securely plugged into a functional 5V USB power source.
    • Check that all light units are properly connected to the junction box.
    • Verify that the inline switch on the USB cable is in the "on" position.
    • Try a different USB power source to rule out a faulty adapter or port.
  • Lights are dim or flickering:
    • Adjust the brightness using the inline switch.
    • Ensure the power source provides sufficient and stable 5V power.
    • Check for loose connections between the lights, junction box, and USB cable.
  • One or more lights are not working:
    • Check the connection of the specific light unit to the junction box.
    • If possible, swap the non-working light with a working one to determine if the issue is with the light unit or the connection port.

Specifications

FeatureDetail
BrandZJchao
Model NumberZJchaocg1ok5hdsr-12
Light TypeMini LED Spotlights
MaterialAluminum
Power SupplyUSB 5V
Light Cord Length2 meters (6.6 feet)
Light Diameter20mm (0.8 inches)
Installation TypeMounted (screws or adhesive pads)
Color (Current Variant)Black
Light Color (Current Variant)Warm Light

Warranty and Support

Specific warranty information for this product is not provided in the available documentation. For warranty details or technical support, please refer to the retailer's return policy or contact ZJchao customer service directly through their official channels or the platform where the product was purchased.

You can visit the ZJchao Store on Amazon for more information or to find contact details.

© 2023 ZJchao. All rights reserved. This manual is for informational purposes only.

Related Documents - ZJchaocg1ok5hdsr-12

Preview ZJCHAO Active DI Box User Manual (Model 13122500244)
User manual for the ZJCHAO Active DI Box (Model 13122500244). Includes product specifications, manufacturer details, and usage instructions for this dual-channel balanced sound interface.
Preview User Manual: ZJCHAO Bluetooth Solar Portable AM/FM/SW Radio (Model 26102501966)
Comprehensive user manual for the ZJCHAO Bluetooth Solar Portable Radio. Includes product specifications, manufacturer details, and usage instructions for AM/FM/SW bands, Bluetooth, and solar charging.
Preview LUXFURNI STARRY8 USB LED Makeup Mirror: Instruction Manual & Assembly Guide
Comprehensive instruction manual for the LUXFURNI STARRY8 USB LED Makeup Mirror, covering assembly, operation, warranty, and customer support.
Preview Amico LED Recessed Lighting Installation Guide: Retrofit & C-Clip Steps
Step-by-step instructions for installing Amico 5/6 inch LED recessed lighting, including C-clip attachment and retrofit installation for can lights. Ensure proper setup for optimal lighting.
Preview PROZOR Motorcycle Headlights: Specifications, Installation Guide, and Warranty
Detailed specifications, connection diagram, notes, and warranty information for PROZOR Motorcycle Headlights (15W, 3000LM). Includes installation guidance and contact details.
Preview MAUL Schaukasten Extraslim Showcase Installation Guide
Installation instructions for the MAUL Schaukasten Extraslim showcase (models 682 01 - 682 12), detailing components and assembly steps for wall mounting.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.