1. Introduction
Thank you for purchasing the blonbar Wake-up Light Alarm Clock, Model AJ300. This device combines a bedside lamp, alarm clock, and USB charging function to enhance your daily routine. Please read this manual carefully to ensure proper use and to fully understand its features.
Figure 1: blonbar Wake-up Light Alarm Clock (Model AJ300)
2. Safety Information
- Ensure the product is placed on a stable, flat surface.
- Do not expose the device to water or excessive humidity.
- Use only the provided power adapter.
- Keep out of reach of children.
- Do not attempt to disassemble or repair the device yourself. Contact customer support for assistance.
- Unplug the device during lightning storms or when unused for long periods.
3. Package Contents
Verify that all items are present in the package:
- blonbar Wake-up Light Alarm Clock (Model AJ300)
- Power Adapter
- User Manual
Video 1: Unboxing a similar Sunrise Alarm Clock. This video demonstrates the typical contents of the package, including the main unit, power adapter, and user manual.
4. Product Features
- 3-Level Dimmable Light: Adjust the brightness of the lamp and clock display.
- 10W USB Charging: Conveniently charge your devices via the integrated USB port.
- Dual Alarm System: Set two independent alarms.
- Sunrise Simulation: The wake-up light gradually brightens 10 minutes before the alarm time.
- 10 Natural Sounds: Choose from various soothing sounds for waking up or falling asleep.
- 10-Minute Snooze Function: Provides extra rest with up to 3 snooze cycles.
- Countdown Timer: Set a timer for various activities.
- White Noise: Helps create a calming environment.
- Touch Control: Intuitive touch interface for light and settings.
Figure 2: Key features including dual alarms and sound options.
5. Setup
- Unpack: Carefully remove all components from the packaging.
- Placement: Place the Wake-up Light on a stable, flat surface near a power outlet.
- Connect Power: Insert the power adapter into the DC 12V port on the back of the device, then plug the adapter into a wall outlet.
- Initial Power On: The display will light up, and the device will be ready for initial setup.
Figure 3: Rear view of the device showing connection ports.
6. Operating Instructions
6.1. Setting the Time
- Press and hold the Time Setting button (often labeled with a clock icon) for 2 seconds. The hour display will start flashing.
- Use the Up and Down buttons (or rotary knob) to adjust the hour.
- Press the Time Setting button again to confirm the hour and move to minute adjustment.
- Use the Up and Down buttons (or rotary knob) to adjust the minutes.
- Press the Time Setting button one more time to confirm and exit.
- To switch between 12-hour and 24-hour format, short press the Time Setting button.
Figure 4: 12-hour and 24-hour time display options.
6.2. Setting Alarms (Alarm 1 and Alarm 2)
The device supports two independent alarms. Alarm 2 includes a wake-up light function.
- Select Alarm: Press and hold the Alarm 1 or Alarm 2 button for 2 seconds. The alarm time display will flash.
- Set Alarm Time: Use the Up and Down buttons (or rotary knob) to set the desired hour, then press the respective Alarm button again to confirm and move to minutes. Adjust minutes and press the Alarm button to confirm.
- Set Alarm Volume: After setting the time, the volume level will flash. Use the Up and Down buttons (or rotary knob) to select the desired volume (01-12). Press the Alarm button to confirm.
- Select Alarm Sound: The sound selection will flash. Use the Up and Down buttons (or rotary knob) to choose from 15 available sounds. Press the Alarm button to confirm.
- Activate Wake-up Light (Alarm 2 only): For Alarm 2, after selecting the sound, you can enable or disable the wake-up light. The light will gradually increase in brightness 10 minutes before the set alarm time.
- Save Settings: Press the respective Alarm button one last time to save the settings and activate the alarm. An alarm icon will appear on the display.
Video 2: Instructions on how to set and turn off alarms.
Video 3: Demonstration of setting two alarms on the device.
6.3. Turning Off Alarms and Snooze Function
- Snooze: When the alarm sounds, short press the SNOOZE button to activate the 10-minute snooze function. You can use snooze up to 3 times.
- Turn Off Alarm for the Day: To turn off the alarm completely for the day, short press the active Alarm button (Alarm 1 or Alarm 2) or long press the SNOOZE button. The alarm will reset for the next day.
- Deactivate Alarm: To permanently deactivate an alarm, press and hold the respective Alarm button until the alarm icon disappears from the display.
Figure 5: Snooze function and screen brightness control.
6.4. Adjusting Light Brightness and Color
- Lamp Brightness: Touch the circular light ring or the Light button to cycle through 3 brightness levels (Low, Medium, High) and turn off.
- Screen Brightness: In clock mode, short press the SNOOZE button to adjust the screen display brightness.
- Wake-up Light: When Alarm 2 is active, the light will gradually increase in intensity 10 minutes before the alarm sounds, simulating a sunrise.
Figure 6: Touch control and 3-level brightness adjustment for the lamp.
Video 4: Demonstration of adjustable light brightness from dim to intense.
6.5. Natural Sounds and Countdown Timer
- Natural Sounds: Press the Music Note button to cycle through 10 natural sounds (e.g., birdsong, ocean waves, rain, bonfire). Use the Up and Down buttons (or rotary knob) to adjust the volume.
- Countdown Timer: Press the Countdown button (often labeled with a timer icon) to set a sleep timer for 30, 60, or 90 minutes. The selected natural sound will play for the set duration and then automatically turn off.
Figure 7: Natural sounds and countdown timer features.
6.6. USB Charging
The device features a 10W USB charging port. Connect your smartphone or other compatible devices to the USB port on the back of the unit to charge them.
Figure 8: USB charging function in use.
7. Maintenance
- Cleaning: Wipe the device with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Storage: Store the device in a cool, dry place when not in use for extended periods.
- Power: Always unplug the device before cleaning or maintenance.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not power on. | Power adapter not connected or faulty. | Ensure the power adapter is securely plugged into the device and a working power outlet. Try a different outlet. |
| Alarm does not sound. | Alarm not set or volume too low. | Verify alarm settings (time, sound, volume). Ensure the alarm is activated (alarm icon visible). |
| Wake-up light not working. | Wake-up light function disabled for Alarm 2. | Ensure the wake-up light is enabled during Alarm 2 setup. |
| USB charging not working. | Device not properly connected or incompatible. | Ensure the USB cable is securely connected. Check if your device is compatible with 10W USB charging. |
9. Specifications
- Model Number: AJ300
- Brand: blonbar
- Product Dimensions: 22.5 x 22.8 x 7 cm
- Item Weight: 465 g
- Material: Plastic
- Power: 10 Watts
- Color Temperature: 4000 Kelvin
- Light Source Type: LED
- Power Source: Corded Electric
- Switch Style: Touch Sensitive
- Special Features: Dimmable, Dual Alarm, Sunrise Simulation, Natural Sounds, USB Charging
10. Warranty and Support
For warranty information or technical support, please refer to the contact details provided on the product packaging or visit the official blonbar website. Keep your purchase receipt for warranty claims.
Manufacturer: blonbar