FLEXISPOT E3 Dual Motor Electric Standing Desk User Manual

Introduction

This manual provides essential instructions for the assembly, operation, maintenance, and troubleshooting of your FLEXISPOT E3 Dual Motor Electric Standing Desk. Please read this manual thoroughly before assembly and use to ensure safe and efficient operation.

The FLEXISPOT E3 desk features a seamless and silent dual motor system, designed for smooth height adjustments. It offers a spacious 60x24 inch workspace and customizable height settings to support both sitting and standing positions.

Image: The FLEXISPOT E3 Dual Motor Electric Standing Desk, showcasing its black desktop and white frame, configured with multiple devices for a complete workstation.

Safety Information

• Ensure all components are securely fastened before use.
• Keep children and pets away from the desk during operation.
• Do not overload the desk beyond its maximum weight capacity of 220 lbs.
• Avoid placing liquids directly on the control panel or near electrical components.
• Regularly check for loose connections or damaged parts. Discontinue use if any damage is found.
• The desk is equipped with an anti-collision system. However, always ensure a clear path during height adjustments to prevent accidents.

Image: A visual representation of the desk's anti-collision system, which detects obstacles during movement and automatically reverses to prevent damage or injury.

Package Contents

Your FLEXISPOT E3 Electric Standing Desk typically arrives in two packages. Please verify all components are present before beginning assembly.

• Desktop (60x24 Inch, Whole-Piece Board)
• Dual Motor Frame (White)
• Control Panel with Memory Presets
• Power Adapter and Cables
• Assembly Hardware (screws, tools, etc.)
• Instruction Manual

Setup Instructions

Assembly typically requires two people due to the weight of the components. Please follow the detailed instructions provided in the included assembly guide for your specific model. The general steps are outlined below:

1. Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, soft surface to prevent scratches.
2. Assemble the Frame: Follow the specific instructions to connect the crossbar, side brackets, and feet to the lifting columns.
3. Attach Desktop: Position the desktop upside down. Carefully align the assembled frame with the pre-drilled holes (or mark and drill new holes if necessary, as some desktops may require this step) on the underside of the desktop. Secure the frame to the desktop using the provided screws.
4. Install Control Panel: Mount the control panel to the underside of the desktop in an easily accessible location.
5. Connect Cables: Connect the motor cables to the control box, and then connect the control panel cable and power adapter to the control box. Ensure all connections are secure.
6. Cable Management: Use the provided cable ties or management accessories to neatly organize all cables, preventing tangles and ensuring safe operation.
7. Initial Power-Up: Plug the desk into a standard electrical outlet. The desk may require an initial reset or calibration as per the specific instructions in your assembly guide.

Image: A detailed view of the desk's strong steel frame, emphasizing the robust construction that ensures stability and durability.

Operating Instructions

Control Panel Functions

Image: The programmable control panel of the FLEXISPOT E3 desk, featuring a digital display, up/down arrows for manual adjustment, and four memory buttons for saving preferred heights.

• Up/Down Arrows (▲ / ▼): Press and hold to manually adjust the desk height. Release to stop at the desired height.
• Memory Presets (1, 2, 3, 4): These buttons allow you to save and recall up to four preferred height settings.

Saving Height Presets

1. Adjust the desk to your desired height using the Up/Down arrows.
2. Press the 'M' or 'Set' button (often indicated by a checkmark or 'S' symbol) once. The display will flash.
3. Within a few seconds, press one of the numbered preset buttons (1, 2, 3, or 4). The current height will now be saved to that button.

Recalling Height Presets

Simply press the desired numbered preset button (1, 2, 3, or 4). The desk will automatically move to the saved height.

Dual Motor Operation

Image: A close-up of the dual motor frame, illustrating the smooth and continuous height adjustment capabilities of the desk.

The dual motor system ensures stable and quiet operation, with noise levels under 50 dB. This design allows for a higher weight capacity and smoother transitions between sitting and standing positions.

Image: Illustration demonstrating the robust load capacity of the FLEXISPOT E3 desk, capable of supporting up to 220 lbs.

Maintenance

• Cleaning: Wipe the desktop and frame with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners.
• Cable Management: Periodically check and reorganize cables to prevent them from getting caught or damaged during height adjustments.
• Lubrication: The lifting columns are generally maintenance-free. Do not attempt to lubricate internal components unless specifically instructed by FLEXISPOT support.

Troubleshooting

For persistent issues or error codes not listed, please refer to the full troubleshooting guide on the FLEXISPOT website or contact customer support.

Specifications

Warranty and Support

FLEXISPOT provides the following warranty coverage for your E3 Electric Standing Desk:

• 5-Year Coverage: Applies to the desk frame and motor.
• 2-Year Coverage: Applies to the control panel and electronics.

For warranty claims, technical assistance, or any inquiries, please contact FLEXISPOT customer service. Refer to your purchase documentation or the official FLEXISPOT website for current contact information.

Manufacturing Process

The FLEXISPOT E3 desk is produced with precision and innovation, utilizing advanced manufacturing techniques to ensure product quality and durability. The following video provides insight into the factory processes involved in creating FLEXISPOT products.